International Journal of Precision Engineering and Manufacturing

  • 제5권2호
  • /
  • Pages.32-38
  • /
  • 2004
  • /
  • 2234-7593(pISSN)
  • /
  • 2005-4602(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

A Study on the Surface Finishing Technique using Electrorheological Fluid

  • Park, Sung-Jun (Center for Nano Technology, Yonsei University) ;
  • Kim, Wook-Bae (School of Mechanical Engineering, Yonsei University) ;
  • Lee, Sang-Jo (School of Mechanical Engineering, Yonsei University)
  • 발행 : 2004.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The electrorheological(ER) fluid has been used to the ultraprecision polishing of single crystal silicon as new polishing slurry whose properties such as yield stress and particle structure changed with the application of an electric field. In this work, it is aimed to find the effective parameters in the ER fluid on material removal in the polishing system whose structure is similar to that of the simple hydrodynamic bearing. The generated pressure in the gap between a moving wall and a workpiece, as well as the electric field-induced stress of the mixture of ER fluid-abrasives, is evaluated experimentally, and their influence on the polishing of single crystal silicon is analyzed. Moreover, the behavior of abrasive and ER particles is described.

키워드

참고문헌

  1. Winslow, W.M., 'Induced Fibration of Suspensions,' J. Appl. Phys., Vol.20, pp.1137-1140, 1949 https://doi.org/10.1063/1.1698285
  2. Kordonski, W.I., Jacobs, S.D., 'Mangetorheological Finishing,' 5th Int. Conf. ER and MR , pp.1-12, 1995
  3. Tani, Y. , 'Development of High Efficiency Finishing Process using Magnetic Fluid,' Annals of the CIRP, Vol.33, No.1, pp.217-220, 1984 https://doi.org/10.1016/S0007-8506(07)61412-7
  4. Umehara, N., Kato, K., Mizuguchi, S., Nakamura, S.,'Micro Surface Polishing Using Magnetic Fluid in Local Area,' J. of JSPE, Vol.60, No.11, pp.1606-1610, 1994
  5. Suzuki, H., Koera, S., Hara, S., Matsunaga, H., Kurobe, T., 'Magnetic Field-Assisted Polishing-Application to a Curved Surface,' Precision Engineering, Vol.4, pp.197-202, 1989
  6. Kuriyagawa, T., Syoji, K., 'Development of ER Fluid Assisted Machining for 3-D Small Parts,' J. of JSPE, Vol.65, No.1, pp. 145-149, 1999
  7. Kim, W.B., Lee, S.J., Kim, Y.J., Lee, E.S., 'The Electromechanical Principle of Electrorheological Fluid-Assisted Polishing,' International Journal of Machine Tool and Manufacture, Vol. 43, pp.81-88, 2003 https://doi.org/10.1016/S0890-6955(02)00143-8
  8. Lee, J.J., 'Micro-Polishing of Complex and Flat Parts using ER Fluid,' 4th Conf Advance in Abrasive Technology, pp.319-323, 2001
  9. Larson, R.G., The Structure and Rheology of Complex Fluids, Oxford university press, pp. 360-387, 1999
  10. Parthasarathy, M., Klingenberg, D., 'Electro-rheology : Mechanisms and Models,' Mat. Sci. Eng .R., Vol.17, pp. 57-103, 1996 https://doi.org/10.1016/0927-796X(96)00191-X
  11. Hao, T., 'Electrorheological Suspensions,' Adv. Col. Int. Sci., Vol.97, pp.1-35, 2002 https://doi.org/10.1016/S0001-8686(01)00045-8
  12. Tichy, J.A., 'Bingham Fluid Lubrication Sstudies,' J. of Rheology, Vol.35, No.4, pp.477-496, 1991 https://doi.org/10.1122/1.550231
  13. Kim, W.B., Lee, S.J., Kim, Y.J., Lee, E.S., 'Ultra-precision Polishing Technique for Micro 3-Dimensional Structures using ER Fluids,' J. of KSPE, Vol.19, No.12, pp.134-141, 2002