• 한국정밀공학회지
• /
• 제12권1호
• /
• pp.5-14
• /
• 1995

An optical measurement method of three dimensional surface profiles which is named the slit beam projection is suggested and practically implemented. This method is intended especially for noncontact and fast digitization of sculptured surfaces for CAD modeling and die manufacturing. Its basic principles are based on geometric optics. Deatiled optical principles and an sub-pixel image processing technique to enhance the measuring resolutions are described in this study. The measuring performances of the slit beam projection are presented and discussed to demonstrate that an actual measuring accuracy of below .+-. 0.2mm can be achived over the whole measuring range(500mm*300mm*200mm)

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.552-559
• /
• 2005

The resistance of a structure against an earthquake is related to its ability to absorb the seismic input energy. The development of devices for dissipating the seismically induced energy on the structure is a subject that is receiving large attentionin the field of earthquake engineering. One example of these devices is the steel plate with slits. In this paper, a connection with a slit-type steel plate damper installed at each ends of wide-flange section beam, as an energy absorption element, was proposed. A series of experiment was performed to investigate their behavior and structural characteristic. The main parameters were the aspect ratio of the struts in slit plates, thickness of the struts and height of the vertical plates. Test results indicated that most of the energy was absorbed by plastic deformation of slit plate dampers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.41-43
• /
• 1997

This paper represents the comparison of harmonic loss characteristics of the inverter-driven 3-phase squirrel cage induction motor with slit and U-iron bridge slots of rotor. Two-dimensional time-stepped finite element method is used for electromagenetic field analysis. And spectrums of bar current, phase current, and torque are compared in each case.

• 대한전자공학회논문지TC
• /
• 제49권6호
• /
• pp.105-110
• /
• 2012

본 논문에서는 슬롯과 슬릿을 사용하여 무선랜 대역 중 802.11a(5.15~5.825GHz) 대역이 소거된 평면형 UWB(Ultra Wide-Band) 안테나를 설계하였다. 소거 대역폭은 패치와 접지면에 있는 슬롯과 슬릿의 길이로 조절할 수 있고, 안테나의 방사특성은 실험값을 통해 살펴보았다. 안테나의 반사손실 -10dB 이하를 기준으로 대역폭은 소거하고자 하는 WLAN대역(5.147 ~ 5.83GHz)을 제외한 UWB 전 대역(3.1 ~ 10.6 GHz)에서 만족한다. 또한, 측정된 방사패턴은 H면에서 무지향성으로 나타난다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.101-104
• /
• 2010

다중펄스 로켓모타에 적용하려는 격벽형 펄스분리장치에 대한 설계를 진행하였다. 펄스분리장치의 부품인 파열판의 Slit 형상과 용접조건 및 Seal Disc 적용여부 등 설계인자를 변경하며 설계하였다. 설계 및 제작된 펄스분리장치에 대한 공압 파열시험을 실시하여 Slit 개수 및 용접강도 증가, Seal Disc 적용에 따라 파열압력이 증가함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.384-387
• /
• 2003

In this paper, the evaluation of image quality was performed for digital radiography which is developing in using amorphous selenium as a photoconductor material for the purpose of offering basic research data and measurement technique about Medical Imaging Quality. So Modulation Transfer Function as a main factor of imaging quality evaluation was investigated by slit method. For measurement of MTF, Nuclear associates. 07-624 Slit camera image was obtained to study the variation of MTF corresponding to changing spatial frequency. And Presampling MTF was estimated by slit camera image with $10\;{\mu}m$ width at Digital Radiography. In this study, the obtained data demonstrates that the clinical value of a direct conversion type digital radiation detector using the amorphous selenium, which is being developed by domestic technology.

• 대한전자공학회논문지TC
• /
• 제37권8호
• /
• pp.24-32
• /
• 2000

본 논문에서는 기존의 Wilkinson 전력 분배기의 1/4 파장 정합 선로를 유도성 슬릿이 삽입된 3가닥 결합 구조로 구현함으로써 점유면적을 줄이고 전기적 특성을 개선시킨 새로운 구조의 전력 분배기를 제안하였다. 정합 선로의 결합 구조로 인해 발생하는 전기적 특성과 위상의 변화를 유도성 슬릿과 선로의 길이 조정으로 보상하였다. 삽입된 유도성 슬릿의 인덕턴스 값은 폭과 깊이에 의해 결정되는데, 인덕턴스의 최적화를 통하여 상호 커패시턴스를 보상함으로써 전기적 특성을 향상시킬 수 있었다. 제작된 전력 분배기는 중심 주파수 f= 1.75 GHz에서 입,출력 단 반사 특성이 각각 -34.2 dB, -34.3 dB를 나타내었고 출력 단간 격리도 특성은 -36.7 dB를 나타내어 기존의 것에 비해 수치적으로 우수한 특성을 유지하였다. 크기 면에서도 3가닥 결합 구조로 구현함에 따라 2차원적인 점유면적을 기존의 약 1/3배로 줄였다.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.188-199
• /
• 2013

This thesis is the fundamental study on the adaptation of escape device for reducing small size of fish in set-net. The escape devices for experiments were made the grid-type devices with three different slit sizes (15, 20 and 25mm). The experiments of size selectivity on escape devices were conducted by using two kinds of species as black rockfish (Sebastes schlegeli) and sea perch (Lateolabrax maculatusi) in the experimental tank. The size selectivity curve was fitted by using a logistic function and the parameters of selectivity curve were estimated by a maximum likelihood method. In the results; 50% selection ranges for the grid-type escape devices with three different slit sizes were; a black rockfish was 13.30, 19.22 and 22.06cm and a sea perch was 17.64, 20.91 and 22.78cm, respectively. The 50% selection range of a black rockfish was wilder than a sea perch about 1.1~1.3 time. Therefore, the small size of fish are able to reduce by using the grid type escape device. However, the optimum slit size of grid should be decided to consider the size of target species and economics of catches.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1992년도 정기학술강연회 발표논문 초록집
• /
• pp.58-63
• /
• 1992

종래의 방파기능에 부가하여 방파제에 친수기능과 소파기능을 부여한 다목적 방파제(종 Slit형 유공방파제)를 계획, 설계하였다. 수리실험을 통해 기존 구조물과의 비교 평가를 시행하여 유공방파제의 유의성을 확인하였으며, 실험결과를 토대로 현지적용을 목적으로 단면을 개선하였다.

• 한국레이저가공학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2014

Indium tin oxide (ITO) is an important transparent conducting oxide (TCO). ITO films have been widely used as transparent electrodes in optoelectronic devices such as organic light-emitting devices (OLED) because of their high electrical conductivity and high transmission in the visible wavelength. Finding ways to control ITO micromachining depth is important role in the fabrication and assembly of display field. This study presented the depth control of ITO patterns on glass substrate using a femtosecond laser and slit. In the proposed approach, a gaussian beam was transformed into a quasi-flat top beam by slit. In addition, pattern of square type shaped by slit were fabricated on the surfaces of ITO films using femtosecond laser pulse irradiation, under 1030nm, single pulse. Using femtosecond laser and slit, we selectively controlled forming depth and removed the ITO thin films with thickness 145nm on glass substrates. In particular, we studied the effect of pulse number on the ablation of ITO. Clean removal of the ITO layer was observed when the 6 pulse number at $2.8TW/cm^2$. Furthermore, the morphologies and fabricated depth were characterized using a optical microscope, atomic force microscope (AFM), and energy dispersive X-ray spectroscopy (EDS).