• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.75-80
• /
• 2005

In this thesis, We Fabricated Cu thin films of 1000 $\AA$, 3000 $\AA$, and 6000 $\AA$ thickness on the single crystal sapphire, polycrystal alumina, and amorphous slide glass substrates deposited by electron beam evaporation(EBE) method. We investigated properties of resistivity and adhesion of these Cu thin films under various conditions, substrate temperature(room temperature, 10$0^{\circ}C$, 20$0^{\circ}C$ under vacuum) and annealing temperatures(400 $^{\circ}C$, 600 $^{\circ}C$ for 30 min after the deposition). We found that these adhesion was increased in order of slide glass, sapphire, and alumina. The adhesion of the Cu thin films on alumina was high value about 4 times, compared with that of the Cu thin films on slide glass. We found that these resistivities were decreased with increasing substrate temperature and thin film thickness. The resistivity(2.05 $\mu$Ω\ulcornercm) of the Cu thin films with 6000 $\AA$ thickness at 200 $^{\circ}C$ on the slide glass was low value, compared with that of aluminum(2.66 $\mu$Ω\ulcornercm).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.399-404
• /
• 2008

The influence of gas hydrate dissociation on submarine slope stability was studied in this paper. Gas hydrates are stable under high pressure and low temperature conditions. Once gas hydrate dissociates due to natural or human activities, it generates large amount of gas and water. During gas hydrate dissociation, a pore pressure between soil particles increases and results in the loss of an effective stress and degradation of soil stiffness. A pore pressures model was proposed to calculated excess pore pressures generated by gas hydrate dissociation at the Storegga Slide. A slope stability analysis for the Storegga Slide using a two dimensional finite difference method was carried out by considering excess pore pressures due to gas hydrate dissociation. Since the excess pore pressure calculated by the proposed method resulted in the considerable loss of stiffness and strength in slope, a submarine slope failure occurred at the Storegga slide was well simulated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.97-102
• /
• 2005

This paper presents feed rate optimizaton of a PMLSM driven feed-slide for mininum vibrations by smoothing velocity curve with finite jerk. First of all, the PMLSM was designed and made to reduce detent force. Next, a PMLSM driven feed-slide system was mathematically modeled as a 4-degree-of-freedom lumped parameter model. The key idea of our vibration minimization method is to find out the most appropriate smooth velocity curve with finite jerk. The validity of our proposed method has been verified by comparing computer simulation results of the feed-slide model with experimental ones.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권8호
• /
• pp.351-357
• /
• 2005

This paper presents vibration minimization of a PMLSM driven feed-slide by using optimized smooth velocity curve with finite jerk. First of all, the PMLSM was designed and made to reduce detent force. Next, a PMLSM driven feed-slide system was mathematically modeled as a 4-degree-of-freedom lumped parameter model. The key idea of our vibration minimization method is to find out the most appropriate smooth velocity(feedrate) curve with finite jerk. The validity of our proposed method has been verified by comparing computer simulation results of the feed-slide model with experimental ones.

• 한국환경복원기술학회지
• /
• 제2권4호
• /
• pp.9-15
• /
• 1999

The purpose of this study was to investigate factors and variables which have significant effects on visual preference of urban stream in Taejon city and to suggest design & management information for urban stream. These works consist of two phases. First, we tested the Hyechon college students' visual preference for 36 spots of urban stream slide and then selected 10 spots slide by the Sturges' formula. Second, we analyzed factors and variables of visual preference of urban stream using the semantic differential scale method and then processed using descriptive analysis, factor analysis and multiple linear regression analysis. The major findings of this study can be summarized as follows. 1. The difference of landscape adjectives between the highest score of visual preference slide (No.10) and the lowest score of visual preference slide (No.2) was cleanness. 2. Three factors, the nature, the cleanness and the movement, were derived from the factor analysis. 3. Factors covering the visual preference of urban stream have been found to be the landscape of urban stream, the nature, the cleanness, and the movement. The visual preference factors of urban stream need to be considered in creating or restoring the ecological urban stream landscape.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.367-372
• /
• 2000

$SiO_2$/Si 기판과 비정질 slide glass 기판 위에 대향타겟식스퍼터법(FTS법)을 이용하여 sputtering current 0.1~0.8 A, 방전 가스압 0.5~3mTorr, 기판온도 R.T~$400^{\circ}C$에서 ZnO 박막을 증착하였다. sputtering current 0.4 A, 가스압력 0.5 mTorr, 기판온도 30$0^{\circ}C$에서 증착된 ZnO/glass 박막과 ZnO/$SiO_2$/Si 박막의 $\Delta\theta_{50}$은 $3.8^{\circ}$와 $2.98^{\circ}$를 각각 나타내었다. 이러한 조건에서 FTS법은 비정질 slide glass 기판 위에서도 우수한 c-축 배향성을 갖는 ZnO 박막을 제작할 수 있다는 것을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제2권3호
• /
• pp.257-267
• /
• 1994

Motions of an unsymmetric rigid body on a rigid floor subjected to earthquake excitations with special attention to coefficient of friction are investigated. Motions of a body in a plane are classified (Ishiyama 1980) into six types, i.e. (1) rest, (2) slide, (3) rotation, (4) slide rotation, (5) translation jump, (6) rotation jump. Based upon the theoretical and experimental research work special attention is paid to the sliding of a body. The equations of motions and the behavior of coefficient of friction in the time of floor excitation are studied. One of the features of this investigation is the introduction and estimation of the "time dependent" coefficient of friction. It has been established that the constant kinetic coefficient of friction $${\mu}(kin){\sim_\sim}0.8{\mu}(stat)$$ does not give the appropriate results. The method for the estimation of the friction coefficient variation during the time is given.

• 미생물학회지
• /
• 제12권3호
• /
• pp.147-148
• /
• 1974

A small amount of Duco cement or Elmer's clear cement was dropped on a slide glass and immediately spread with a glass rod or woden stick a thin film on the surface. After approximately 1 minute a small amount of rubber cement was spread on the top of the film of Duco cement using the same method as described earlier. It was important that the rubber cement be smeared before the Duco cement dried out. These two kinds of cements must not be mixed. It was better to make the film of the rubber cement slightly thicker than the film of Duco cement. This composite film may be used up to several months after preparation. The sample leaf was placted on the slide, prepared with adhesive and the leaf surface was passed on the film with the thumb. The pressing was done so the leaf surface was completely in contact with the film. Then the leaf was peeled from the slide.

• The Journal of Korean Physical Therapy
• /
• 제34권4호
• /
• pp.140-148
• /
• 2022

Purpose: The purpose of this study was to investigate the effects of the scapulothoracic mobilization on subject with lateral epicondylalgia. This was done through lateral slide scapular test, grip strength, visual analogue scale, glenohumeral joint external rotation range of motion. Methods: Before the experiment, Lateral slide scapular test, grip strength, visual analogue scale, glenohumeral joint external rotation range of motion were measured. Scapulothoracic joint mobilization was applied and then measurements were taken again to compared the changes. Results: After applying the scapulothoracic joint mobilization, lateral slide scapular test, grip strength, visual analogue scale, glenohumeral joint external rotation range of motion significantly improved. Conclusion: This study found that the scapulothoracic mobilization was effective in improving functional aspects and pain on subject with lateral epicondylalgia. The results suggest that the scapulothoracic joint mobilization is a significant considered intervention method that could be used for subject with lateral epicondylalgia.

• Journal of Plant Biology
• /
• 제28권4호
• /
• pp.329-332
• /
• 1985

A simple new device for obtaining very clear epidermal imprints for light microscopic studies is discussed. This new device is developed from“Britfix”(polystyrene cement) which is non-toxic to the plant organs. It involves direct application of the material on the desired surface of the plant organ to obtain thin, transparent replica. From the present investigation“Britfix”is found to be useful for the study of epidermal anatomy, morphology and physiology. Epidermal imprints can be mounted on the microscope slide without a mounting medium. Permanent slide of these imprints can be kept for any desired period without any deterioration of the replica.