• Journal of Chest Surgery
• /
• 제26권5호
• /
• pp.343-348
• /
• 1993

Growth of suture line and anastomosis is required for long-term success after the tracheal and bronchial surgery in infant and pediatric patient. We used various suture materials in these cases, but the results were differ. To select the adequate suture material in tracheal surgery, we tried next. Tracheal anastomoses were performed in 150 Sprague Dawley rats, aged 4 to 8 [mean 5.8] weeks and weight 62 to 106[mean 83.6] gram, to compare polydioxanone[PDS] 7-0, polyglactin 910[Vicryl]7-0, and polypropylene [prolene] 8-0 suture materials. In 150 rats, only 29[20%] were lived over 300 days, and the weight was 250 to 320[mean 289.5]gram. Cross sectional area of the anastomoses and two or three tracheal rings below anastomosis site were measured under microscope, and calculated and compared as Hsieh`s equition. Cross-sectional area,anastomosis site/normal site 100, were 89.4 $\pm$ 5.34% in PDS group[n=9], 75.7 $\pm$ 6.06% in Vicrylgroup [n = 10], and 80.8$\pm$ 4.06% in Prolene group[n = 10]. Histopathologic studies were done for all autopsies or put in death around 300 days postoperatively. PDS absorblion was not seen 16 weeks after suture but disappeared over 24 weeks slide. Vicryl absorbtion was noted postoperative 8 to 16 weeks, with marked tissue reaction. Prolene showed least tissue reaction, but the suture material was persisted with regional fibrotic capsule.Causes of death were respiratory failure in 76 cases, tracheal rupture in 22 cases, hemorrhage, biting, starvation and etc. in 23 cases. With the brief review of literatures, we report the results.

• 한국조경학회지
• /
• 제26권2호
• /
• pp.101-109
• /
• 1998

Recently, improvement of the quality of urban riverscape environment has been emphasized not only by landscape architectural field but also by various professionals in planning and ecology. Regarding to this current movement, the aim of this paper is to highlight major visual elements of riverscape axis as a case study of Shinchon River in Taegu City to suggest some basic guidelines for arranging riverscape in urban area. The study was mainly based on Repertory Grid Development method which was developed in Japan. The method is consist of three steps such as decision of element landscape in study area for slide photos, selection of evaluation items for interview and obstraction of proper evaluation factors. The major findings through this study are as follows; 1) The 12 major visual elements which possibly improve riverscape, based on abstraction of proper evaluation factors, are Dunchi, surface of the water,, equipment of river, buildings near riverside, river vertical and horizontal facilities like bridge, fine view, riverbed, water plant, naturalness, water's edge line, harmony and street trees by order. 2) Total numbers of adjective which describe 12 common factors are 25, such as clean, open, stable, quiet, comfortable, friendly, bright, natural etc. In addition, Dunchi was described 337 times by various adjectives, surface of the water was 200 times and arrangement of river was 146 times which is similar result with the order of 12 influential common factors. 3) Therefore, Dunchi, surface of the water and equipment of river are three most important factors which could create better riverscape. These three factors implies us how we supply good quality of urban river environment for the urban residents.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.653-658
• /
• 2011

In general, the purpose of packaging fasteners is a series of management activities to maintain the condition at the time of production until they get delivered to the end user. An automatic packing system for fasteners is consisted of bucket conveyor, slide feeder, vision inspection system, box-magazine conveyor system and automatic packing machine. Also, the automatic packing machine is consisted of six modules including charging device, clamping/opening device, sealing/cutting device, feeding/air-shower device, supplying/adjusting device and device frame, etc. In this paper, we proposed an automatic packing mechanism of the one station concept for packing work of fastener objects where the continuous batch work is performed in a finite space. The proposed one-station packing mechanism has been optimized through mechanical, dynamical, structural and fluid analyses. And it had been manufactured as the prototype of automatic packing machine. The field test for validation of performance was performed directly at the production line of bolt and screw. In the field test, this packing machine showed an efficiency of about 4.5 times the manual operation. It also showed 30% reduction in the consumption of packing materials compared to the manual operation. This automatic packing machine for fastener objects will be commercialized soon.

• 복식문화연구
• /
• 제15권3호
• /
• pp.541-549
• /
• 2007

Goguryo is the ancient dynasty which established the system of ancient state earlier than Baekje and Sila, and was a strong political and military power. Unlike the rock carving works of prehistoric times, mural paintings composed of line and color tones in tombs are characterized more by its social aspect and symbolism as a serious form of art than other cultural heritage of Goguryo. In response to that, this study analyzed the dress and ornaments of women found in Anak No. 3 ancient tomb, Susan-ri ancient tomb, Ssangyeongchong, which are the ancient tombs in Pyeongyang from 4th century to 5th century, have relatively more ancient tombs than any other places and preserved the mural paintings well, by using the plate, slide, literature and data related to relics in order to figure out the characteristics of women's dress and ornament in Goguryo, and the lifestyle and social aspect of Goguryo.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.55-62
• /
• 2011

Although the performance of the commercial vessel has been dramatically improved through innovations, there has been no big changes on the traditional anchoring method of commercial vessels, both on design and operation until now. In this paper, two cases of design modifications were introduced for optimized design of pocket type anchor handling, which resulted in improved performance of the vessel's anchoring. From the first time fully balanced type anchors were applied on vessels in Korean shipyard, main design problem on this application was that the anchor doesn't normally slide into the pocket when the anchor fluke is not in line with pocket, as the anchor freely rotates by the swivel on forerunner. In order to prevent the problem, swivel has been deleted on the forerunner to prevent anchor rotation until now, but this solution caused problems such as twist lock of anchor chain, restriction of windlass direction, etc. On this paper, one of the solution is introduced to overcome the design problem by tilting the hawse pipe to some extent, which makes anchor turned at the time anchor ring touches the pocket skirt and that it properly slides into the pocket. Secondly, one of the solution is introduced to overcome misalignment problem between anchor chain cable and roller of chain compressor, which has been frequently occurred, by modification of roller design.

• Biomolecules & Therapeutics
• /
• 제7권1호
• /
• pp.22-28
• /
• 1999

Induction of apoptosis is considered to be the underlying mechanism that accounts for the efficiency of chemotherapeutic drugs. It has recently been proposed that doxorubicin (DOX) can induce apoptosis in human leukemic cells via the Fas/Fas Ligand (FasL) system. Comparison of Fas and FasL mRNA expression between drug- and anti-Fas antibody(Fas-Ab)- induced apoptosis was analyzed for examining the role of Fas/FasL system in the mediation of drug-induced apoptosis. After HL-60 cells were routinely cultured, MTT assay was performed for cytotoxicity test. Giemsa staining was carried out to monitor the apoptosis morphologically. By semiquantitative RT-PCR analysis, the expression of Fas and FasL at 4, 10, 24 hours was determined after DOX and Fas-Ab treatment. Dose-dependent cytotoxicity was induced by DOX-treatment, while Fas-Ab treatment showed the similar dose-dependent pattern but the cytotoxicity is not reached at LD$_{50}$ at 100 ng/ml concentration of Fas-Ab. In the 10ng/m1 DOX and 10ng/m1 Fas-Ab treated group, typical apoptotic cell morphology was shown such as fragmented nuclei and cell membrane budding in the Giemsa-stained slide. Fas mRNA expression was not changed significantly in the both groups. But, FasL mRNA expression was induced significantly at initial period of apoptosis. In this study, Fas/FasL interaction assumed to be involved in drug-induced apoptosis.s.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.25-30
• /
• 2024

Considering the difficulties of the manufacturing industry by improving production efficiency in the era of high wages and aging in domestic automation facilities, automation facilities are considered an irreversible trend, but many serious related disasters are occurring due to the problems of increasing automation facilities due to the enlargement of manufacturing processes, line-up, and automation. The purpose of this study is to review the usage conditions and safety measures for industrial robots that are experiencing serious industrial accidents and are expected to continue to increase in facilities among automation facilities at the automation industrial site and propose ways to ensure the fundamental safety of the facilities at all times The suggestions are as follows. The purpose is to prevent safety accidents in advance by applying safety door aids to industrial sites and installing additional safety devices in safety slide door lock systems applied to safety fence doors of new and already installed facilities to detach safety keys and ensure that workers carry them at all times.

• 수산해양기술연구
• /
• 제56권1호
• /
• pp.37-44
• /
• 2020

The change of fishing power index was analyzed to identify the development of the vessel and gear technology that may improve the fishing efficiency of the offshore conger eel pot fishery from 1980s to 2015. Gross tonnage per fishing vessel was rapidly increased annually. The standard of pot was maintained, but the number of pot used rapidly increased by using conger eel pot hauling devices, carrying and loading devices, main line hauler, casting devices and slide type pot. Fish finder system to identify fishing ground information and the conger eel pot hauling devices were modernized, and supply rate was also increased. Therefore, the relative fishing power index in the offshore conger eel pot fishery increased from 1.0 in 1980 to 1.3 in 1990, to 1.8 in 2000 and to 2.0 in 2015. The results are expected to contribute to reasonable fisheries stock management of the offshore conger eel pot fishery.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.907-913
• /
• 2004

일반적인 이동 로봇의 주된 관심은 경로 생성과 생성된 경로 추종에 있다. 그러나 일부 고속의 이동성이 필요로 하는 로봇의 경우 동역학적 제한 조건이 존재하며, 이러한 제한 조건 내에서 원하는 움직임에 대한 제어가 요구된다. 된 논문에서 환경 지도를 가지고 있지 않은 상태, 즉 미지의 환경에서 이동 로봇의 경로 추종에 있어서 빠른 이동시에 발생할 수 있는 이동 로봇의 미끄러짐이나 전복 현상을 막기 위해 이동 로봇의 동역학적 제한 조건을 퍼지 논리를 이용하여 기준 속도를 변화시켜 안전하고 빠는 경로 추종 성능을 얻고자 하였다. 특히, 라인 추종 이동 로봇을 모델링하여 실시간으로 변화하는 목표점에 대한 추종 제어기를 설계하고 퍼지 최적 속도 제한 제어기를 통해 연속적으로 변화하는 라인에 대해서 지능적으로 로봇의 속도를 제한하여 안정적인 추종 성능을 발휘함을 확인하였다.

• 대한치과보철학회지
• /
• 제45권1호
• /
• pp.1-11
• /
• 2007

Statement of problems: The concept of CR has also changed continuously.?In order to find out the factors that affect the centric slide, studies were carried out to compare the forms of wisdom teeth eruption, lateral movement, premature contact in CR, and anterior movement. Research and statistical methods were based on the report by the 1980 Korean dental association. Material and method: In our study, 403 dentists in their twenties and dentistry students who could understand CR and CO (and who did not receive occlusal, orthodontic treatment, without extreme caries and large prosthodontic care) were compared with the 25 year old results. A segment of line parallel to the upper incisor was marked on the lower incisor. When seen laterally, a line perpendicular to the occlusal plane was drawn on the foremost area of the upper incisor. This line was extended to the lower incisor and the two points (points at the lower and upper incisors) were used as reference points for the CO. After guiding the occlusion to the CR, two lines were marked by using the same method that was used for the CO. The point in which these lines meet became the reference point of CR occlusion Results and conclusions: Results of the experiment completed in 1980 show that all 307 research members had anterior-posterior and upper-lower displacement. Displacement measurements were $0.7{\pm}0.4mm$ for the anterior-posterior displacement, $0.99{\pm}0.50mm$ for the upper-lower displacement,0.18{\pm}0.31 mm for the lateral displacement, and $1.32{\pm}0.67mm$ for the total displacement. Results of the 2006 experiment show that all 409 research members had anterior-posterior and upper-lower displacement. The anterior-posterior displacement was $1.12{\pm}0.86mm$, the upper-lower displacement was $1.02{\pm}0.71mm$, the lateral displacement was $0.61{\pm}0.56mm$, and the total displacement was $1.80{\pm}0.99mm$. No specific differences were found between each group when comparing displacement according to the forms of wisdom teeth eruption. Since 1980, the percentage of unerupted teeth has increased from 35.16% (111/307 people) to 57.5% (236/409 people). Westernization of the Korean cranial form and intraoral structure has brought about these results. In our experiment, 26.7% (109/409 people) of the subjects were cuspid guided, while 7.3% (30/409 people) were mutually guided. No specific differences were found in the amount of displacement between the two groups. Only the subjects with anteriors coming in contact made up the largest percentage group (42.3%, 173/409 people) in our study. No specific differences were found between each group.