• The Research Journal of the Costume Culture
• /
• v.9 no.5
• /
• pp.700-711
• /
• 2001

The purpose of this study was to investigate the differences in the method of patternmaking, difficult in draft of patternmaking, fit in sleeve, aesthetic view, fashionableness in the five types of two-piece sleeve under the controled situation. Five types of two piece sleeve that were originated from five countries including domestic companies which called A type, B type, C type, D type, and E type were used. In order to conduct the experiment fur the study, 10 persons who were well organized about the patternmaking drafted 5 types of sleeve and were tested for the differences in the method of patternmaking, difficulty in draft of patternmaking. Another panel were tested for fit in sleeve, aesthetic view, fashionableness in the five types of two-piece sleeve in jacket under the controled situation. The results of this study were as followed 1. C type was needed height of armhole in bodice and D type was needed height of armhole and width of armhole in bodice as well as all parts of sleeve measurements to draft patternmaking. 2. There were significant differences of the items such as cap height, ease amount around sleeve cap, width of sleeve, forwardness of sleeve and the length of elbow line of the five types patternmaking drafted. 3. There were significant differences of difficulty in draft of the five types of patternmaking. C type and E type were easier to draft. 4. There were significant differences in fitness of the sleeves in jacket. C type and E type were more fit. 5. There were significant differences in aesthetic view. A type, B type and E type were more aesthetic under the situation. 6. There were significant differences in fashionableness in jackets. A type and E type were more fashionable under the situation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.2
• /
• pp.365-381
• /
• 2016

This study compared and analyzed current sleeve head products for men and women to develop sleeve head products for aesthetically-designed sleeves. Men and women's sleeve head products, suitable for sleeve caps, were designed and developed based on the results. The study results are as follows. First, men and women's sleeve heads for aesthetic jacket sleeves were designed with sleeve patterns in the background. Sleeve heads and upper sleeves were additionally designed to make 7-layers for men and 4-layers for women. Second, sleeve head patterns were designed so that men's would have a whole length of 48cm, an angle of $30^{\circ}$ and a width of 4.5-7.5cm; in addition, women's would be 40cm, $30^{\circ}$ and 4-5cm. Third, the same materials were used for men's and women's sleeve head products, and the background was made from 1-layer of soft non-woven fabric. As for the sleeve heads, 2-layers and 1-layer of non-fusible interlinings were used for men's and women's, respectively. In order to provide flexibility, the materials were designed in a bias direction. For upper sleeves, 1-layer of non-woven fabric and felt were used for men's, and 1-layer of felt for women's so that an empty space caused by easing contraction can be supplemented.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.685-694
• /
• 2016

This study investigates the problems of fitness and motion suitability for Korean male military winter jackets (inner and outer) and provides data for new pattern development. We analyzed fitness and motion suitability by a questionnaire survey with 140 Korean male soldiers and a wearing evaluation with 7 subjects of central army male size. A survey of male soldiers indicated that the fitness and motion suitability satisfaction was over 3.0 (Likert scale) for both inner and outer jackets. There were opinions that the sleeve length was short for the inner jacket and the waist girth and hem girth was slightly large for the outer jacket. In the wearing evaluation results with subjects of central army male size, fitness of total length, sleeve length and collar height showed a score lower than 3.0 for the inner jacket and collar height on the outer jacket. The motion suitability result showed a low score (1.0-2.0) in an arm raising motion for the inner jacket and 2.0-3.0 at neck motion in the outer jacket. In conclusion, there is more dissatisfaction in inner jackets than outer jackets. For the inner jacket, sleeve is short, sleeve hem is narrow, collar height is a little high and the sleeve creeps up during arm motion. The waist girth and hem girth was slightly large and collar height was a little high for the outer jacket.

• Steel and Composite Structures
• /
• v.52 no.2
• /
• pp.165-182
• /
• 2024

Grouted sleeve splice (GSS) is an effective type of connection applied in the precast concrete structures as it has the advantages of rapidly assembly and reliable strength. To decrease the weight and cost of vertical rebar connection in precast shear walls, a light-weight sleeve is designed according to the thick-cylinder theory. Mechanical behaviour of the light-weighted GSS is investigated through experimental analysis. Two failure modes, such as rebar fracture failure and rebar pull-out failure, are found. The load-displacement curves exhibit four different stages: elastic stage, yield stage, strengthening stage, and necking stage. The bond strength between the rebar and the grout increases gradually from outer position to inner position of the sleeve, and it reaches the maximum value at the centre of the anchorage length. A finite element model predicting the mechanical properties of the light-weighted GSS is developed based on the Concrete Damage Plasticity (CDP) model and the Brittle Cracking (BC) model. The effect of the rebar anchorage length is significant, while the increase of the thickness of sleeve and the grout strength are not very effective. A model for estimating ultimate load, including factors of inner diameter of sleeves, anchorage length, and rebar diameter, is proposed. The proposed model shows good agreement with various test data.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.2
• /
• pp.219-228
• /
• 2003

The purpose of this study were to examine the characteristics of arm types proposed in the previous study and to present sleeve patterns according size and shape of 4 arm types. 31 direct and indirect items were measured. The subjects for this study were 132 females of twenties. The results were as follows. 1. All of the direct measurements showed significant difference by the arm types. especially at the front armhole part. Such a.: the items of arm gradients, armhole sizes belong to the indirect measurements made clear difference also. 2. By the discriminant analysis, 9 items including underarm length, front armhole girth, upper arm girth, degree of elbow point-wrist point discriminated arm type by the hit ratio of 90.4% Item related to shape of arm rather than size made a sharp distinction. 3. Through the examination of existing patterns and wearing tests on the subjects among 4 groups, sleeve patterns classified by the arm type were suggested.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.405-408
• /
• 2005

This paper presents the characteristics of antenna factors for sleeve dipole antennas with a broad bandwidth. The coupled integral equations for the unknown current distributions on each elements are derived and solved by applying Galerkin's method of moments. The flatness of antenna factor is considered by variation of the length and number of sleeve elements.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.1009-1014
• /
• 2007

A detailed study on aged sleeves for old transmission lines was carried out to clarify the deterioration of sleeves and the condition of installation. A lot of removed aged sleeves from transmission lines were investigated. Many biased installed cases and corrosion of steel sleeve part were found. These defects can cause a serious accident such as blackout during operating. The temperature distribution within sleeve of ACSR conductor was precisely measured and examined, conducted as part of series of studies on large currents in transmission lines. According to measurements of the conductor temperature near a joint(sleeve and clamp), the electrical resistance of joint is lower than that of the same length conductor. The detailed results were presented in the text.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.22 no.2
• /
• pp.19-28
• /
• 2020

This study investigated the annual frequency and clothing type by extracting puff sleeves designs from overseas fashion collections from S/S and F/W 2017 to S/S and F/W 2019. Specifically, it analyzed production characteristics and pattern methods by the type of puff sleeve design, and found the following: In terms of the percentage of puff sleeves by season, S/S 2019 was the highest. Since Newtro, with a 1990s sensitivity, was the mainstream trend during the S/S 2019, power puff sleeves, a signature of the Newtro style, accounted for the greatest portion of this design feature. In terms of the type of clothes with puff sleeves, 'dress' (54.3%) was the highest, followed by 'shirts/blouse' (27.5%), 'jacket/coat' (12.5%), and 'padded coat/jacket' (5.7%). Specifically, puff sleeve patterns were found mostly in the 'dress' category, more than 47% every season, while the figures were more than 23%, 9.3%, and 2.6% in 'shirts/blouse', 'jacket/coat' and 'padded coat/jacket', respectively. In other words, puff sleeve designs were more common in 'dress' or 'shirts/blouse' than in a 'padded coat/jacket'. In general, the shoulder length is reduced to prevent the shoulders from looking broader because of puffs. In contrast, recent puff-sleeve styles differ from those introduced by modern fashion designers in that they have drop shoulders with puffs attached. Furthermore, as constructive and over-exaggerated sleeve patterns appeared, puffs were applied to diverse sleeve styles including mutton leg and Mameluke styles. The analysis results of this study will contribute to the development of the fashion industry through small quantity batch production pursuing unique styles and serve as the basis for further studies on the configuration methods of puff sleeves. This study will be used in various ways, including as educational material on sleeve patterns. Through the analysis of sleeve patterns, this study tries to provide basic data for planning the design of puff sleeves and helping to diversify the ladies' apparel market in the future.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.162-168
• /
• 2005

The pictures of design details, such as collar type, sleeve type, skirt type, and skirt length, and color tone were evaluated by 377 persons in terms of sensibility and emotion. The data were analyzed by SPSS using ANOVA and Factor analysis to find out the most effective types of details on consumer's sensibility and emotion, and the methods were introduced. The most effective type is skirt length on sensibility and emotion of women's dress. The second type is different according to sensibility and emotion. Sensibility and emotion were composed of three concept: contemporary, mature and character. Sleeve type is second determinant to contemporary concept, and color tone is to mature concept, collar type is to character concept. 41 each details of design were positioned into 3D-concept space to connect each detail type and fashion concept of women's dress.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.419-429
• /
• 2005

The objective of this study is to clarify the structural features of members consisting of a connection, as part of the previous study on the CFT column-to-beam tensile connection with a combined cross diaphragm. This connection has the following merits: it evenly distributes the stress on the beam flange and the diaphragm and reduces the stress concentration by improving the stress transfer route and restraining the abrupt deformation of the diaphragm. Finite element analysis was performed to find out the stress transfer through the sleeve, which is an important member of the connection with a combined cross diaphragm. The length and thickness of the sleeve were used as variables for the analysis. The analysis results showed that the length and thickness of the sleeve did not influence the capacity of the connection and played the role of a medium for the transfer of the stress from the diaphragm to the filled concrete. It was proposed that the appropriate length of the sleeve have the same value as the diameter of the sleeve and that the appropriate ratio of the sleeve diameter to the sleeve thickness be 20. Two equations for the evaluation of the load carrying the capacity of the connection were also proposed through the modification of the evaluation equation suggested in the previous study.