• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.168-171
• /
• 1993

In this paper, we design a time optimal controller of a dual arm robot to handle the object. Differently from the master-slave type robot, same priority is imposed on the both of the arms for effective handling the specifed object. For finding a time optimal collision-free trajectory, a graphical method is applied for the robot with two degree of freedom. Some simulation results show the effectiveness of the proposed method.

• 대한의용생체공학회:의공학회지
• /
• 제24권4호
• /
• pp.309-318
• /
• 2003

본 연구는 현재 산업용으로 널리 사용되고 있는 수직 다관절 6자유도 로봇을 의료용 목적으로 적용하기 위해 수행하였다. 이미 산업용으로 제안되어 검증된 로봇을 사용한다면 비용, 시간적인 면에서 상당한 잇점이 있다. 따라서 본 논문에서는 산업용으로 제안된 로봇을 의료 목적으로 사용하여 연구하였다. 본 시스템은 뇌졸중 환자와 같이 한쪽 팔을 다친 사람들을 위해 제안하였다. 한쪽 팔이 비정상이고 다른 팔이 정상인 환자를 대상으로 정상인 팔의 움직임을 획득하여 마비되거나 정상으로 움직이기 어려운 팔을 운동시키도록 마스터-슬레이브 시스템을 구성하였다. 또한 팔꿈치와 어깨의 기구학을 해석하기 위하여 기존의 인체에 관한 연구 결과를 적용하였다. 또한 슬레이브 로봇에 힘 센서를 부착하여 환자의 재활 정도를 측정할 수 있도록 하였으며, 위험 상황에 대비함으로써 슬레이브 로봇의 안전성을 높였다. 이러한 시스템으로 인해 물리치료사의 도움 없이 환자 혼자 운동이 가능하도록 시스템을 구성하였다. 제안된 시스템과 제어 알고리즘은 실험과 시뮬레이션을 통하여 타당성을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.357-360
• /
• 1997

Abstract: In teleoperation field robotic system such as hydraulically actuated robotic excavator, the maneuverability and convenience is the most important part in the operation of robotic excavator. Particularly the force information is important in dealing with digging and leveling operation in the teleoperated excavator. Excavators are also subject to a wide variation of soil-tool interaction forces. This paper presents a new force reflecting joystick in a velocity-force type bilateral teleoperation system. The master system is electrical joystick and the slave system IS hydraulically actuated cylinder with linear position sensor. Particularly Pneumatic motor is used newly in the master joystick for force reflection and the information of the pressure of salve cylinder is measured and utilized as the force feedback signal. Also force-reflection gain greatly affects the excavation performance of a hydraulically actuated robotic system and it is very difficult to determine it appropriately since slave excavator contacts with various environments such as from soft soil to rock. To overcome this, this paper proposes a force-reflection gain selecting algorithm based on artificial neural network and fuzzy logic.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.354-358
• /
• 1993

This paper shows the basic configuration for the system(H/W and S/W) which can interface between the PC and the slave robot. The PC(personal computer) is used for the basic MMI(Man-Machine Interface) system. The slave robot is controlled through the PC, actually the generated trajectory by using polynomials. The velocity control is carried out at the via points of the rrajectory. The heuristic method which chooses the average of the two slopes as the via velocity is used for the velocity control. From the simulation results, we can choose the better trajectory polyomial for reducing the deviation error at the starting and arriving parts.

• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.295-304
• /
• 2000

In the teleoperation system, force and velocity signals are communicated between a master and a slave robot. The addition of force feedback to a teleoperation system benefits the operator by providing more information to perform given tasks especially for tasks requiring contact with environment. When the master and slave arms are located in different places, time delay is unavoidable and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The control scheme proposed in this paper is based on the estimator with virtual master model. Delayed signal from the master robot can be replaced by the estimated signal with the virtual master model. This control scheme makes the teleoperation system stable for the given time delay while the conventional scheme is not. This new control scheme is verified through numerical simulations and an experiments using the dual axis testbed of the teleoperation system.

• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.552-557
• /
• 2011

This paper presents experimental results on the energy-bounding approach to a rate-mode bilateral teleoperation control that can guarantee the robust system stability in variable time-delayed telecommunication environments. Previously, rate-mode energy bounding approach [15] was proposed and verified with experimental results using the simulated remote slave model. In this paper, a real experimental setup using an industrial robot (Denso) as a remote slave robot composed and conducted similar experiments with previous paper. In order to guarantee stability of the Denso when contacting with high impedance wall, velocity based impedance control modified by position based is used. Experimental results show that the rate-mode energy bounding approach can guarantee stable bilateral teleoperation system in the free and contact motion with variable time delay.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.244-248
• /
• 2009

This paper describes a real-time EtherCAT Master library. The library is developed using Xenomai. Xenomai is a real-time development framework. It cooperates with the Linux kernel, in order to provide a pervasive, interface-agnostic, hard real-time support to user-space applications, seamlessly integrated into the GNU/Linux environment. The proposed master library implements EtherCAT protocol for master side, and supports Application Programming Interfaces(APIs) for programming of real-time application which controls EtherCAT slave.

• Nuclear Engineering and Technology
• /
• 제50권4호
• /
• pp.613-618
• /
• 2018

We are developing a shared remote control mobile robot for aerial work in nuclear power plants (NPPs); a robot consists of a mobile platform, a telescopic mast, and a dual-arm slave with a working tool. It is used at a high location operating the manual operation mechanism of a fuel changer of a heavy water NPP. The robot system can cut/weld a pipe remotely in the case of an emergency or during the dismantling of the NPP. Owing to the challenging control mission considering limited human operator cognitive capability, some remote tasks require a shared control scheme, which demands systematic software design and integration. Therefore, we designed the architecture of the software systematically.

• 제어로봇시스템학회논문지
• /
• 제22권8호
• /
• pp.585-589
• /
• 2016

Recently, the robotic assist system for cardiovascular intervention gets continuously growing interest. The robotic cardiovascular intervention systems are largely two folds, systems for cardiac ablation procedure assist and systems for vascular intervention assist. For the systems, the clinician controls the catheter inserted through blood vessel to the heart via a master console or master manipulator. Most of the current master manipulators have structure of joystick-like pivoting 2 degree of freedom (DOF) handle in the core, which is used in parallel with other sliding switches and input devices. It however is desirable to have customized and optimized design manipulator that can provide clinician with intuitive control of the catheter motion fully utilizing the advantage of the use of robotic structure. A 6 DOF kinematic mechanism that can capture the motion control intention of the clinician in translational 3 DOF and rotational 3 DOF is proposed in this paper. Also, a master-slave motion relationship specially designed for the cardiac catheter manipulation motion is proposed and implemented in an experimental prototype. Design revision for implementation of more efficient motion and experiment in combination with an experimental slave robot system for catheter manipulation are underway.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1938-1943
• /
• 2005

Network human-robot interface is an important research topic. In home application, users access the robotic system directly via voice, gestures or through the network. Users explore a system by using the services provided by this system and to some extend users are enable to participate in a service as partners. A service may be provided by a robot, a group of robots or robots and other network connected systems (distributed sensors, information systems, etc). All these services are done in the network environment, where uncertainty such as the unstable network connection, the availability of the partners in a service, exists. Moreover, these services are controlled by several users, accessing at different time by different methods. Our research aimed at solving this problem to provide a high available level, flexible coordination system. In this paper, a multi-agent framework is proposed. This framework is validated by using our new concept of slave agents, a responsive multi-agent environment, a virtual directory facilitator (VDF), and a task allocation system using contract net protocol. Our system uses a mixed model between distributed and centralized model. It uses a centralized agent management system (AMS) to control the overall system. However, the partners and users may be distributed agents connected to the center through agent communication or centralized at the AMS container using the slave agents to represent the physical agents. The system is able to determine the task allocation for a group of robot working as a team to provide a service. A number of experiments have been conducted successfully in our lab environment using Issac robot, a PDA for user agent and a wireless network system, operated under our multi agent framework control. The experiments show that this framework works well and provides some advantages to existing systems.