• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1447-1453
• /
• 2014

Wireless Body Area Networks (WBAN), standardized as IEEE 802.15.6, enable digital devices on/around the human body to communicate with one another. WBAN is essentially a person's piconet consisting of a master (mobile) device and several slave devices, which follows his/her mobility pattern, and hence, occasionally collides with another piconet as people meet or pass by. As such, a mechanism to detect collision and avoid interference is needed for intra-piconet communications. In this paper, we focus on this notorious problem of piconet collision and propose Distributed Time Division Piconet Coexistence (DTDPC) using local time offset exchange as a simple, attractive solution. The proposed DTDPC provides different level of services for various applications. Besides our simulation results have shown that the proposed solution outperforms the conventional CSMA protocols.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1413-1421
• /
• 2014

This paper realize power control embedded system with one master of Core-A 32-bit RISC processor and several slaves controling power with synchronized digital signals. Core-A platform is consisted of Core-A processor, AMBA bus, SSRAM, AC97, DMA, UART, GPIO etc. Slave is made by both digital part and analog part. The former generates various power control patterns synchronized with master signal. The latter converts 220V power proportional to 4 bit digital signals. design of Embedded system is executed in Flowrian II, in which software is cross-compiled and hardware is verified by simulation. Embedded system is implemented in FPGA board and CPLD chips as well as PCB board for analog power control.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.407-417
• /
• 2003

Enen though several GA-based optimization algorithms have been successfully applied to complex optimization problems in various engineering fields, GA-based optimization methods are computationally too expensive for practical use in the field of structural optimization, particularly for large- scale problems. Furthermore, a successful implementation of GA-based optimization algorithm requires a cumbersome and trial-and-error routine related to setting of parameters dependent on a optimization problem. Therefore, to overcome these disadvantages, a high-performance GA is developed in the form of distributed hybrid genetic algorithm for structural optimization on a cluster of personal computers. The distributed hybrid genetic algorithm proposed in this paper consist of a simple GA running on a master computer and multiple μ-GAs running on slave computers. The algorithm is implemented on a PC cluster and applied to the minimum weight design of steel structures. The results show that the computational time required for structural optimization process can be drastically reduced and the dependency on the parameters can be avoided.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.515-522
• /
• 2017

In this paper, an isogeometric analysis for multipatch problem is investigated, in which two or more geometries are connected at the interface in a conforming or non-conforming conditions. To express higher continuity at the patch interface, two approaches such as Nitsche based method and master-slave method are formulated for the linear elasticity problem and discretized using the isogeometric approach using NURBS basis functions. A short comparison between two approaches in formulations reveals the pros and cons of them with the applicability in the isogeometric multipatch problem. In addition, a NURBS based stress recovery is adopted to express a better stress continuity through the post-processing. Numerical examples indicate the effectiveness of Nitsche method in the non-conforming patch, following the exact solution well. For the stress concentration problem with the conforming patch, introduced two methodologies show comparative results, meanwhile the NURBS based stress recovery presents an improved smooth stress contour in the whole domain including the patch interface.

• Journal of the Korean Society of Costume
• /
• v.63 no.6
• /
• pp.14-28
• /
• 2013

This study aims to identify the elements of black culture and use it to analyze the formative characteristics of casual fashion items as well as the symbolic meanings presented in the graphic designs of the items. First of all, in order to distinguish the identity of black culture, this study made a division into racial, social, and artistic aspects based on cultural specificities of Stuart Hall, a culture theorist. This was for a theoretical review and based on this review, a theoretical framework was developed to analyze the characteristics of American casual fashion design of black people. The case study selected 1719 fashion images of 137 male brands and 33 female brands from websites of companies manufacturing casual wear of black people in America. The following is a summary of the study results. The conceptual characteristics based on specificities of black culture can be categorized into ten attributes: playfulness in order to digest human grief and emotion positively, satire of the mainstream society, spontaneity through emotional expression from the heart, abstractness of various emotions elating suffering, humor trying to express negative aspects as the meaning of light and innocent laughter, dependence with passive attitudes toward discrimination and master-slave relationships in history, resistance against discrimination and disadvantages, African orientation and primitiveness pursuing natural conditions, aggressiveness against violence and unfair treatment, and confidence and defiance against social deprivation and corruption. Based on the results of an analysis through formative classification system founded on racial, social, and artistic aspects of black people, specificities of black culture are of formative characteristics of their casual fashion design. These elements are presented on graphic t-shirts through strong colors, loose silhouette, and details with many pockets. These characteristics were reflected in symbolic meanings presented in the graphic.

• Smart Structures and Systems
• /
• v.25 no.1
• /
• pp.1-22
• /
• 2020

The modal strain energy method is one of the efficient methods for detecting damage in the structures. Due to existing some limitations in real-world structures, sensors can only be located on a limited number of degrees of freedom (DOFs) of a structure. Therefore, the mode shape values in all DOFs of structures cannot be measured. In this paper, a modified modal strain energy based index (MMSEBI) is introduced to locate damaged elements of structures when a limited number of sensors are used. The proposed MMSEBI is based on the reconstruction of mode shapes using Improved Reduction System (IRS) method. Therefore, in the first step by employing IRS method, mode shapes in slave degrees of freedom are estimated by those of master degrees of freedom. In the second step, the proposed MMSEBI is used to located damage elements. In order to evaluate the efficiency of the proposed method, two numerical examples are considered under different damage patterns considering the measurement noise. Moreover, the universal threshold based on statistical hypothesis testing principles is applied to damage index values. The results show the effectiveness of the proposed MMSEBI for the structural damage localization when comparing with the available damage index named MESBI. The results demonstrate that the presented method can be used as a practical strategy for structural damage identification, especially when a limited number of sensors are installed on the structure. Finally, the combination of MMSEBI and IRS method can provide a reliable tool to identify the location of damage accurately.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.3
• /
• pp.626-637
• /
• 2014

On ship, especially on large ship, the flexure deformation between Master (M)/Slave (S) Inertial Navigation System (INS) is a key factor which determines the accuracy of the integrated system of M/S INS. In engineering this flexure deformation will be increased with the added ship size. In the M/S INS integrated system, the attitude error between MINS and SINS cannot really reflect the misalignment angle change of SINS due to the flexure deformation. At the same time, the flexure deformation will bring the change of the lever arm size, which further induces the uncertainty of lever arm velocity, resulting in the velocity matching error. To solve this problem, a $H_{\infty}$ algorithm is proposed, in which the attitude and velocity matching error caused by deformation is considered as measurement noise with limited energy, and measurement noise will be restrained by the robustness of $H_{\infty}$ filter. Based on the classical "attitude plus velocity" matching method, the progress of M/S INS information fusion is simulated and compared by using three kinds of schemes, which are known and unknown flexure deformation with standard Kalman filter, and unknown flexure deformation with $H_{\infty}$ filter, respectively. Simulation results indicate that $H_{\infty}$ filter can effectively improve the accuracy of information fusion when flexure deformation is unknown but non-ignorable.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.151-161
• /
• 2014

This study suggests method of expression of nail art utilizing Salvador Dali's Paranoiac Critical Method and produced the actual works based on discussions on Salvador Dali's painting, Paranoiac Critical Method, Nail Art's artistry and technique of expression. The result of the study is as follows: 1) Characteristic of Dali's painting is a Paranoiac Critical Method. If suggesting this characteristic in a method of expression of nail art, a good work which can be expressed on a small space, a nail, representing Dali is selected and 5 tips which are very similar to the rate of the painting are used in order to obtain an aesthetic effect just like a painting. And after composing on tips using the whole paining or part of painting, actual techniques of expression such as Hand Painting, Protranse or Water Decal are used. 2) the result of nail art produced utilizing Dali's Paranoiac Critical Method is as follows. Most of all, for nail art I with the topic of "The Persistence of Memory" (1931), after giving changes to 5 tips for the watch which is a part of the painting, Hand Painting technique is used using Acrylic Painting with colors which are similar colors to the painting. Then for nail art II which adopted "Slave Market with Invisible Bust of Voltaire" (1940), the whole painting is divided into 5 tips and Protranse technique which attaches printed paper onto nails was used. Lastly, for nail art III with the subject of "The Enigma of Desire My Mother, My Mother, My Mother" (1929), Water Decal which is emphasizing the parts of the painting and composing on 5 tips and copying printed picture onto Water Transfer Paper in order to attach on the nails is used. These nail arts show aesthetic characteristics such as fantasy, unconsciousness, grotesque, infinity, non-realism and horror just like paintings.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1147-1158
• /
• 2006

Clustering algorithm is an essential element to implement a hierarchical routing protocol, especially for a large-scale wireless sensor network. In this paper, we propose a new type of energy-efficient clustering algorithm, which maximizes the physical distance between cluster head and gateway by a neighbor node discovery mechanism. Furthermore, a slave/master patching scheme is introduced as a useful means of further improving the energy-efficiency. It has been shown that the number of cluster heads can be reduced by as many as 21% as compared with the existing clustering algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.613-619
• /
• 2003

Bluetooth is a communication technology enabling short-range devices to be wirelessly connected. A master and one or more slave devices are connected to form a piconet, and piconets are joined to form a scatternet. The units participating in two or more piconets in a scatternet, is called bridge or gateway nodes. In order to operate the scatternet efficiently, both piconet scheduling for the master and slaves of a piconet, and scatternet scheduling for the bridge nodes are playing important roles. In this paper, we propose a traffic-adaptive dynamic scatternet scheduling algorithm based on rendezvous points and rendezvous windows. The performance of the proposed algorithm is compared and analyzed with that of a static scheduling algorithm via simulations. Simulation results show that our algorithm can distribute wireless resources efficiently to bridge nodes depending on the traffic characteristics.