• Journal of the Korean GEO-environmental Society
• /
• v.18 no.9
• /
• pp.19-31
• /
• 2017

In case of USA, the drilled shaft and the driven pile in the field showed a good correlation in the analysis of the bearing capacity between the dynamic load test and the static load test. However, in Korea, we mainly install the bored pile, which is not widely used overseas and we tried to confirm the reliability of the dynamic load test on the bored pile, because many people questioned the reliability of it. In this study, load tests were carried out on PHC bored piles in LH field (Cheonan, Incheon, Uijeongbu), and the bearing capacity of the dynamic load test (EOID 7times, Restrike 7times) and the static load test (7times) were compared and analyzed. As a result, the average of the bearing capacity of the static load test was 27% higher than that of the dynamic load test (reliability : 0.73, coefficient of variation : 0.3). And the average of the bearing capacity of the static load test (Davisson) was 27% higher than that of the bearing capacity of the dynamic load test (Davisson) (reliability : 0.73, coefficient of variation : 0.2). To reduce the difference between the bearing capacity of the dynamic load test and the static load test, we proposed modified bearing capacity of dynamic load test (base bearing capacity of EOID + skin frictional force of restrike) and difference between the bearing capacities was reduced to 9% (reliability : 0.91, coefficient of variation : 0.2). And the coefficient of variation was reduced to 0.2 and the consistency of analysis increased.

• Journal of Korean Medical Science
• /
• v.33 no.47
• /
• pp.292.1-292.10
• /
• 2018

Background: We investigated the incidence of active tuberculosis among patients with inflammatory bowel disease (IBD) treated with tumor necrosis factor (TNF) inhibitors, with or without latent tuberculosis infection (LTBI). Methods: The study was performed at a Korean tertiary referral center between January 2011 and June 2017. In total, 740 patients with IBD who underwent LTBI screening tests and were followed-up for ${\geq}1$ year after TNF inhibitor treatment initiation were enrolled. LTBI was detected on the basis of tuberculin skin test results, interferon-gamma release assay results, chest X-ray findings, and previous tuberculosis treatment history. The patients were classified into LTBI (n = 84) or non-LTBI (n = 656) group. The risk of developing tuberculosis in each group was assessed on the basis of standardized incidence ratio (SIR) and 95% confidence interval (CI) for active tuberculosis. Results: Mean patient age was 33.1 years, and patients with Crohn's disease were predominant (80.7%). Within 1 year after the initiation of TNF inhibitor treatment, 1 patient in the LTBI group (1/84; 1.2%) and 7 patients in the non-LTBI group (7/656; 1.1%) developed active tuberculosis. The overall 1-year incidence of tuberculosis among the patients was significantly higher than that among the general population (SIR, 14.0; 95% CI, 7.0-28.0), and SIR was not affected by LTBI status (LTBI group: 14.5, 95% CI, 2.0-102.6; non-LTBI group: 14.0, 95% CI, 6.7-29.4). Conclusion: Patients with IBD undergoing TNF inhibitor treatment showed a higher 1-year incidence of tuberculosis than the general population irrespective of LTBI status.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.26-33
• /
• 2019

Recently, the rapid growth of the companion animal market has led to the development of animal disease diagnosis kits. Therefore, the utility of the introduction of biomarkers for the development of animal molecular diagnostics is being reevaluated. A good biomarker should be precise and reliable, distinguish between normal and diseased states, and differentiate between different diseases. Recently reported genetic markers, tumor markers (cell free DNA, circulating tumor cells, granzyme, and skin tumors), and others (brucellosis, programmed death recovery-1, symmetric dimethylarginine, periostin, and cysteinyl leukotrien) have been developed. The biomarkers are used for risk prediction or for the screening, diagnosis, and monitoring of disease progression. The most important criteria for related biomarkers are disease specificity. Many potential biomarkers have emerged from laboratory and test studies, but they have not been validated in independent or large-scale clinical studies. Candidate biomarkers evaluate disease associations, verify the effectiveness of biomarkers for early detection and disease progression, and incorporate them into humans and animals. In the future, it will be necessary to reevaluate the utility of well-structured biomarker-based research and study the development of kits that can be used in on-site tests in accordance with the trends introduced in the diagnosis of animal diseases.

• Tuberculosis and Respiratory Diseases
• /
• v.82 no.4
• /
• pp.306-310
• /
• 2019

Background: Tuberculosis (TB) is increasing in immigrants. We aimed to investigate the current status of latent tuberculosis infection (LTBI) treatment for North Korean Refugees (NKR) compared to South Koreans Contacts (SKC). Methods: TB close contacts in a closed facility of SKC and NKR who underwent LTBI screening in a settlement support center for NKR were analyzed retrospectively. Results: Among tuberculin skin test (TST) ${\geq}10mm$ (n=298) reactors, the males accounted for 72.2% in SKC (n=126) and 19.5% in NKR (n=172) (p<0.01). The mean age was higher in South Korea ($42.8{\pm}9.9years$ vs. $35.4{\pm}10.0years$, p<0.01). Additionally, the mean TST size was significantly bigger in NKR ($17.39{\pm}3.9mm$ vs. $16.57{\pm}4.2mm$, p=0.03). The LTBI treatments were initiated for all screened NKR, and LTBI completion rate was only 68.0%. However, in NKR, LTBI treatment completion rate was significantly increased by shorter 4R regimen (odds ratio [OR], 9.296; 95% confidence interval [CI], 4.159-20.774; p<0.01) and male (OR, 3.447; 95% CI, 1.191-9.974; p=0.02). Conclusion: LTBI treatment compliance must be improved in NKR with a shorter regimen. In addition, a larger study regarding a focus on LTBI with easy access to related data for NKR should be conducted.

• Journal of Environmental Health Sciences
• /
• v.46 no.6
• /
• pp.735-749
• /
• 2020

Objectives: The aim of this study was to investigate airborne pollen counts, inhalant allergen sensitization rate, and allergic disease prevalence among elementary school children in Ulsan, South Korea during 2012-2018. Methods: Burkard samplers for pollen were installed on rooftops in suburban and urban areas in Ulsan. A 24-hour sampling of airborne allergens was conducted six days/week from January 1, 2013 to November 31, 2018. Skin prick tests were done with a total of 4,246 primary school students residing in urban and suburban areas in 2012, 2014, 2016, and 2018. This study examined sensitization to 20 major inhalant allergens. Results: The highest monthly counts of airborne pollen were observed in April and September each year. Among the pollen identified over the six years, pine showed the highest pollen counts (44.3%), followed by oak (22.3%), alder (6.3%) and Japanese hops (4.3%). Tree pollen predominated from March to June, and weed pollen predominated from August to October. Higher sensitization rates for inhalant allergens were observed in Dermatophagoides farinae (42.4%), Dermatophagoides pteronyssinus (43.6%), cat fur (12.1%), birch (9.9%), oak (9.6%), and alder (8.7%). The inhalant allergen sensitization rate was highest in the group with comorbidity (asthma and/or rhinitis and atopic dermatitis), and respiratory allergic disease (asthma and/or rhinitis) was higher than that of atopic dermatitis. Conclusion: Both the counts of tree pollen in the air and the sensitization rate for tree pollen were high in Ulsan. The temporal change in respiratory allergic diseases was similar to that for the sensitization rate of tree pollen, such as oak. In the future, it is considered that additional continuous research on various inhalant allergens and pollen should be conducted.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.5
• /
• pp.5-17
• /
• 2022

A pile is a type of medium for constructing superstructures in weak geotechnical conditions. A pretensioned spun high-strength concrete (PHC) pile is composed of high-strength concrete with a specified strength greater than 80 MPa. Therefore, it has advantages in resistance to axial and bending moments and quality control and management since it is manufactured in a factory. However, the skin friction of a pile, which accounts for a large portion of the pile bearing capacity, is only approximated using empirical equations or standard penetration test (SPT) N-values. Particularly, there are some poor research results on the pile-soil interface under the seismic loads in Korea. Additionally, some studies do not consider geoenvironmental elements, such as groundwater pH values. This study performs sets of cyclic simple shear tests using submerged concrete specimens for 1 month to consider pH values of groundwater and clay specimens composed of kaolinite to generate a pile-soil interface. 0.2 and 0.4 MPa of normal stress conditions are considered in the case of pH values. The disturbed state concept is employed to express the dynamic behavior of the interface, and the disturbed function parameters are newly suggested. Consequently, the largest disturbance increase under basic conditions is observed, and an early approach to the failure under low normal stress conditions is presented. The disturbance function parameters are also suggested to express this disposition quantitatively.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.4
• /
• pp.31-44
• /
• 2023

A base expansion micropile was developed to improve the bearing capacity of the micropile, which bears a simple device installed at the pile base. Under an axial load, this base expansion structure radially expands at the pile tip and attaches itself around ground, compressing the boring wall in the construction stage. In this study, conventional and base expansion micropiles were constructed in the weathered rock where micropiles are commonly installed. Further, field load tests were conducted to verify the bearing capacity enhancement effect. From the load test results, it was revealed that the shaft resistance of base expansion micropiles was about 12% higher than that of conventional micropiles. The load transfer analysis results also showed that compared to conventional micropiles, the unit skin friction and unit end bearing of base expansion micropiles were 15.4% and 315.1% higher, respectively, in the bearing zone of the micropile.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.183-192
• /
• 2023

In this study, we investigated the antioxidant activity, anti-inflammatory activity, whitening, moisturizing, wound-healing, cell proliferation and cell protective effects of 70% EtOH and hot water extract from Scutellaria baicalensis. For the anti-oxidative test, the 70% EtOH and hot water extract showed DPPH radical scavenging activities. In the anti-inflammatory tests, 70% EtOH and hot water extract inhibited the production of NO, pro-inflammatory cytokine (IL-6) and prostaglandin (PGE₂). In addition, it was confirmed that the 70% EtOH and hot water extract inhibited the melanin production, and increased production of hyaluronic acid (HA), a moisturizing factor. As a result of cell migration and proliferation assay, 70% EtOH extract promoted the cell growth in HaCaT cell. Additionally, 70% EtOH and hot water extract showed cell protective effects against UVB, and 70% EtOH extract also showed cell protective effects agianst blue light. Based on these results, it is concluded that the 70% EtOH and hot water extract from Scutellaria baicalensis could be potentially applicable as anti-oxdiative, anti-inflammation, whitening, moisturizing, wound-healing, cell proliferation and cell protective effects in cosmetic natural materials.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.4
• /
• pp.365-373
• /
• 2023

Since the lips are a representative facial part that can express human attraction, aesthetic interest in them has always existed in human history. However, as lips age, they tend to form wrinkles, become thinner, and lose their volume. To counteract this phenomenon, medical procedures such as fillers or fat transplantation have been suggested. In this study, we verified that the one of main effective material complex of L G H&H L IPCERIN^®, combination of cedrol, a sesquiterpene found in cedarwood, and three peptides (acetyl hexapeptide-8, acetyl tetrapeptide-9, and desamidocollagen) could ameliorate the photo-aging and reduce the wrinkles through in vitro experiments. The possibility of improving collagen and elastin expression in skin fibroblasts and reducing MMP expression under photoaging conditions was verified. In addition, it was confirmed that the amount of fat tissue in the lips can be increased by promoting adipose stem cell differentiation and increasing the amount of fat produced in the in vitro adipose stem cell differentiation experiment. Two weeks of human application tests confirmed that a combination of cedrol and peptides can improve the wrinkles, texture, elasticity, and volume of the lips. This study verified that the combination of cedrol and three peptides can be used as effective cosmetic materials to decrease the various signs of aging in the lips.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.7-11
• /
• 2024

The bedsore prevention cushion serves to prevent the skin on the buttocks of a wheelchair user from being damaged through friction with the wheelchair seat. This is because it absorbs some of the weight applied to the wheelchair seat and allows the weight to be applied evenly to the entire contact surface. For the impact test, which is part of the performance testing of bedsore prevention cushions, a hip model that represents the sitting posture of a wheelchair user is required. In this study, a hip model was manufactured for impact testing of bedsore prevention cushions for wheelchairs. Performance tests for pressure bedsore prevention cushions for wheelchairs include KSP 0236, a Korean standard, and KS P ISO 16840-2, an ISO international standard. The hip model proposed in KS P ISO 16840-2 was more suitable for impact testing of bedsore prevention cushions for wheelchairs. However, the guidelines for making hip models proposed by international standards need to be modified to reflect the advancement of model making technology and use easier methods. We propose a new hip model production method that produces a hip model out of plastic all at once and additionally attaches SS-41 steel plates processed into the shape of the hip to make the mass of the model similar to the human body.