• Journal of Sensor Science and Technology
• /
• v.23 no.6
• /
• pp.402-408
• /
• 2014

Heart rate is one of the most important signal to monitor the health condition of the patient or exerciser. Various wearable devices have been developed for the continuous monitoring of ECG signal from human body during exercise. Among these, ECG chest belt has been widely used. However wearing chest belt with ECG sensor is uncomfortable in normal life due to the electrode contact between metal electrodes of ECG sensor and skin of the human body. So we develop the royal healthcare backpack that can measure ECG signal without skin contact by using capacitor-type ECG sensor. The position of the measurement point is critical to collect a clear ECG signal in the capacitive ECG measurement from backpack. Various tests were conducted to find the optimal ECG measurement position which has less noise and could get strong and clear ECG signal during exercise, walking, hiking, mountain climbing and cycling.

• Journal of Korea Multimedia Society
• /
• v.14 no.7
• /
• pp.866-871
• /
• 2011

In this paper, an improved method of hand detecting and hand gesture recognition is proposed, it can be applied in different illumination condition and complex background. We use Adaptive Skin Threshold (AST) to detect the areas of hand. Then the result of hand detection is used to hand recognition through the improved HMM algorithm. At last, we design a simple program using the result of hand recognition for recognizing "stone, scissors, cloth" these three kinds of hand gesture. Experimental results had proved that the hand and gesture can be detected and recognized with high average recognition rate (92.41%) and better than some other methods such as syntactical analysis, neural based approach by using our approach.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.382-389
• /
• 2002

Recently, auger-drilled piling has been widely used in urban area to reduce the air pollution and noise. But this construction method that its basic theory was introduced from Japan may be changed depending on the each piling company and construction field condition. Therefore, the design code and management method for auger-drilled piling is not defined yet. Especially, the lack of research on the bearing capacity of auger-drilled piling leads to the absence of rational bearing capacity prediction equation. This paper presents the optimum design code and economical construction method of the auger-drilled piling by proposing the new bearing capacity prediction equation based on the site specific soil types and construction conditions. In this paper, existing bearing capacity prediction equations and current pile load tests were compared. And the end bearing capacity and skin friction characteristics were also analyzed by comparing the results of CAPWAP. From the results of analysis, a reliable bearing capacity prediction equation considered soil types is proposed.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.71-77
• /
• 2014

This study aimed at developing and evaluating performance of the two logics for respectively operating two-position- and variable-heating systems. Both logics control the heating system and openings of the double skin facade buildings in an integrated manner. Artificial neural network models were applied for the predictive and adaptive controls in order to optimally condition the indoor thermal environment. Numerical computer simulation methods using the MATLAB (Matrix Laboratory) and TRNSYS (Transient Systems Simulation) were employed for the performance tests of the logics in the test module. Analysis on the test results revealed that the variable control logic provided more comfortable and stable temperature conditions with the increased comfortable period and the decreased standard deviation from the center of the comfortable range. In addition, the amount of heat supply to the indoor space was significantly reduced by the variable control logic. Thus, it can be concluded that the optimal control method using the artificial neural network model can work more effectively when it is applied to the variable heating systems.

• Journal of Technologic Dentistry
• /
• v.29 no.1
• /
• pp.9-21
• /
• 2007

This study was conducted to determine the cause and prevalence of occupational skin disease in dental technicians working in Seoul, Korea. and to investigate the relation between these work condition and skin disease of the hand, wrist and forearm. This study was based on the Nordic occupational skin questionnaire(NOSQ), a self-administrated questionnaire which was modified to investigate the dental technician's occupational factors in domestic circumstances. The number was distributed to 500 dental technicians who participated in annual continuing education for dental technicians of the Seoul metropolitan area in April 2006. Of the subjects, 62(30.4%) had eczema and 70(32.9%) had urticaria, as diagnosed. Of the subjects with the symptoms of urticaria, 30 complained of atopic dermatitis, 65 complained of allergic rhinitis, 56 complained of allergic conjunctivitis, and 18 complained of asthma. The group with atopic history had a higher frequency of eczema or urticaria than the group without atopic history. From multiple regression analysis, the group who had a history of atopic dermatitis also had high symptom rates of eczema. The group who had a history of allergic rhinitis and allergic conjunctivitis had high symptom rates of urticaria. The urticaria symptom rates were higher in those wearing gloves than those who did not for the type of work.

• International Journal of High-Rise Buildings
• /
• v.7 no.1
• /
• pp.17-32
• /
• 2018

This paper explores the function of a structural skin with an embossed surface applicable to use for tall building structures. The major diagrid system with a secondary embossed surface structure provides an enhanced perimeter structural system by increasing tube section areas and reduces aerodynamic loads by disorienting major organized structure of winds. A parametric study used to investigate an optimized configuration of the embossed structure revealed that the embossed structure has a structural advantage in stiffening the structure, reducing lateral drift to 90% compared to a non-embossed diagrid baseline model, and results of wind load analysis using computational fluid dynamics, demonstrated the proposed embossed system can reduce. The resulting undulating embossed skin geometry presents both opportunities for incorporating versatile interior environments as well as unique challenges for daylighting and thermal control of the envelope. Solar and thermal control requires multiple daylighting solutions to address each local façade surface condition in order to reduce energy loads and meet occupant comfort standards. These findings illustrate that although more complex in geometry, architects and engineers can produce tall buildings that have less impact on our environment by utilizing structural forms that reduce structural steel needed for stiffening, thus reducing embodied $CO^2$, while positively affecting indoor quality and energy performance, all possible while creating a unique urban iconography derived from the performance of building skin.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.4
• /
• pp.333-338
• /
• 2008

The evaluation for the visage volume was performed with human and dummy face using PRIMOS $body^{(R)}$. Three researchers measured the dummy face attached different volume of clay (6.6 mL, 13.2 mL, and 19.8 mL). It is identified that the high correlation between measured values and real volume ($R^2=0.99$). The percent (%) of relative standard deviation (RSD) of the data was shown below 10%. In Gage R&R analysis, the percent of contribution, the percent of study variation and distinct categories values were 0.78%, 8.85%, and 15% respectively. Therefore this method was regarded as the good standard condition in aspect of reproducibility and repetitiveness of data. The face volume variation was measured by PRIMOS $body^{(R)}$ on the face in participated 10 healthy Korean women volunteers. Subjects used the product once a day for two weeks as night sleeping pack. After application of the test products, the 3D image data of face were taken 1 and 2 weeks later. We found the face volume was significantly decreased after using products. In conclusion, this novel non-invasive technique was useful in measuring and visualizing alterations in face volume as a consequence of certain treatments. This system will provide a rapid and precise analysis of 3D topographical information for face.

• Korean Journal of Acupuncture
• /
• v.30 no.4
• /
• pp.252-263
• /
• 2013

Objectives : Skin color deformation by cupping has been widely used as a diagnostic parameter in Traditional Korean Medicine(TKM). Skin color deformation such as ecchymoses and purpura is induced by local vacuum in a suction cup. Since existing studies have relied on a visual diagnostic method, there is a need to use the quantitative measurement method. Methods : We conducted an analysis of cross-polarization photographic images to assess the changes in skin color deformation. The skin color variation was analyzed using $L^*a^*b^*$ space and the skin erythema index(E.I.). The meridian theory in TKM indicates that the condition of primary internal organs is closely related to the skin color deformation at special acupoints. Before conducting these studies, it is necessary to evaluate whether or not skin color deformation is influenced by muscle condition. Hence, we applied cupping at BL13, BL15, BL18, BL20 and BL23 at Bladder Meridian(BL) and measured blood lactate at every acupoint. Results : We confirmed the high system measurement accuracy, and observed the diverse skin color deformations. Moreover, we confirmed that the $L^*$, $a^*$ and E.I. had not changed after 40 minutes(p>0.05). The distribution of blood lactate levels at each part was observed differently. Blood lactate level and skin color deformation at each part was independent of each other. Conclusions : The negative pressure produced by the suction cup induces a reduction in the volumetric fraction of melanosomes and subsequent reduction in epidermal thickness. The relationship between variations of tissue and skin properties and skin color deformation degree must be investigated prior to considering the relationship between internal organ dysfunction and skin color deformation.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.43-54
• /
• 2018

The purpose of this study is to observe how Panax Notoginseng Flos Ethanol Extract has anti-oxidant activity, cytotoxicity for skin cells, and anti-inflammatory effects and Cosmetics Panax Notoginseng Flos Ethanol Extract was applied to acne skin to analyze moisture, erythema, pores, and blackberries to identify potential as cosmetics material .According to the analysis, Panax Notoginseng Flos Ethanol Extract was found to have high contents of polyphenols and flavonoids and excellent DPPH radical scavenging activity. The extract had no significant cytotoxicity for Raw 264.7 cell and significantly inhibited the creation of NO induced LPS in Raw 264.7 cell so as to present anti-inflammatory effect. After applying an Panax Notoginseng Flos Ethanol Extract of 3% skin toner and spot Solutions to the skin of the skin of the acne for 3 weeks, Increased skin moisture, erythema, pores, black head count were found to be statistically signigicant, and reduced red spots were found in skin condition questions following management. Given the results, it is considered that Panax Notoginseng Flos Ethanol Extract is applicable as the ingredient of a functional cosmetic product that has low cytotoxicity for skin cells, high anti-oxidant activity, anti-inflammatory effect, and acne improvement effect.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.4 s.10
• /
• pp.42-55
• /
• 2006

The Purpose of this study is to offer basic data for Whitening Cosmetics by investigating the Purchasing condition and Satisfaction in the Use of Whitening Cosmetics. The questionnaire was administered to 350 women in the Daejeon, Chungnam-do, Chungbuk-do and Daegu areas. The date was analysed by percentage, $X^2-test$ and frequency. The result of the survey can be summarized as follows: the importance of the development of functional cosmetics has increased, and among these it is possible to reaffirm the importance of whitening cosmetics. Furthermore, it can be seen that functional cosmetics are being used as a means of increasing opportunities for personal expression as a result of improved confidence and satisfaction.