• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.14 no.2
• /
• pp.11-20
• /
• 2008

This thesis' "Hwang Jae Nai Kyung(黃帝內經)", it is one among Uihak5kyung(醫學五經), is originally total of 18 volumes, the first half of 9 volumes are Somun(素問) and the latter half of the others are Youngchu(靈樞). Also, it is best of old book and literature integrating process of Chinese's medicine. Somun(素問) is comprehensive and extensive principles from fundamental problem of medical science related etiology, pathology, physiology to such parts of preventive medicine as regimen, recuperation. Moreover, therapeutic part of diagnosis and remedy, practice of acupuncture and moxibustion is recorded to Youngchu(靈樞). In the "Hwang Jae Nai Kyung(黃帝內經)", basic system takes precautions and medical cure for disease by approaching not method analyzing body but fundamentals of oriental medicine observed as organizing relation. For the purpose of mixing up beauty based on Buddhism of books, we shall pursuit notion of beauty treatment to method improving health because period flowing is changed to real well-being culture chasing outside beauty and healthy life. Then, to come close for part of oriental medicine and cosmetology, we shall present method of meridian pathways and understand device for cosmetic improvement by analyzing relation to 12 of pathways, the five viscera and the six entrails & skin.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1798-1805
• /
• 2020

This study attempted to numerically verify specific effects on skin condition improvement by measuring and comparing changes in skin conditions such as pores, wrinkles, and sebum of LED masks for beauty devices with low output among light sources. 18 healthy women (4 weeks in the control group and 4 weeks in the experimental group) were conducted once a week for 8 weeks. As a result of measuring the skin condition of pores, wrinkles, and sebum, it was confirmed that the skin condition improved significantly as the LED irradiation progressed, and the difference between the groups by measurement period of the experimental group and the control group also showed significant differences in pores, wrinkles, and sebum (p< .001, p<.05). This is meaningful in that it can be presented as clinical information and quantitative data by preparing continuous data in an academic sense by proving the effect of improving the LED mask as a beauty device. It is also suggested that in the future, follow-up studies to prove more effective skin improvement will be conducted.

• Journal of Fashion Business
• /
• v.25 no.2
• /
• pp.51-62
• /
• 2021

This study evaluated the cosmetic effects of a far-infrared hot and cool mask (BBSkinplus) on face skin moisturization, whitening, and wrinkles using a randomized clinical trial. Forty female participants (mean age 47.7 ± 4.6 years) were allocated into the treatment group (BBSkinplus treatment and lotion application twice a day) or the control group (only lotion application twice a day), and moisture, brightness, and wrinkles were measured at 0, 1 and 2 weeks. The average values of each measurement were changed significantly by BBSkinplus treatment compared to the control group. At the 2-week treatment time point, the statistical differences in improvement rates between the two groups were significant at 8.7% vs. 3.9% for moisture (p < 0.01), 0.7% vs. 0.4% for brightness (p < 0.01), and -3.1% vs. 0.0% as Ra and -6.3% vs. 1.5% as R3z for wrinkles (p < 0.05), respectively. No notable complaint was reported regarding any kind of adverse effects such as erythema, itching, or burning. This clinical data support the potential of BBSkinplus as a home beauty device providing moisturizing, whitening, and anti-wrinkle effects on the face.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.9
• /
• pp.1209-1214
• /
• 2020

With the recent aging age, people's interest in healthy life is increasing. People are causing adult diseases or an increasing number of obese populations due to poor lifestyles, eating habits, and poor physical activity. Accordingly, skin beauty research is being conducted using medical information in the information and communication field. Existing systems have not been able to provide smooth information because they are not expressed in combination with various related measurement items. The system proposed in this paper scans the user's body shape using a 3D scanner and a skin care device, calculates the BMI (Body Mass Index) index using 3D image data, and allows you to view the collected data at a glance. Provide a service system. This will provide the user with the content managed by comparing and providing the continuous body change data. It is expected to be widely used in various U-health and beauty fields.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.23-34
• /
• 2022

Due to the regular usage of face masks during the COVID-19 pandemic, many people developed skin issues. As a result, interest in skin care which can be performed independently at home has increased. The purpose of this study is to design a customized home beauty care device to respond to these market trends. In order to do so, the double diamond model was applied in the design thinking process, and the design development process proceeded in the order of discovery, definition, development, and delivery. This study is meaningful in that it focused on the user-centered design development approach by fusing design thinking processes rather than styling-oriented design processes, and suggested new possibilities for design development using information based on the data measured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.25-31
• /
• 2020

In this study, for the safe use of a portable ultrasonic skin-beauty device, an android app was developed to show the irradiation locations of focused ultrasound to a user through augmented reality (AR) and enable stable self-surgery. The utility of the app was assessed through testing. While the user is making a facial treatment with the beauty device, the user's face and the ultrasonic irradiation location on the face are detected in real-time with a smart-phone camera. The irradiation location is then indicated on the face image and shown to the user so that excessive ultrasound is not irradiated to the same area during treatment. To this end, ML-Kit is used to detect the user's face landmarks in real-time, and they are compared with a reference face model to estimate the pose of the face, such as rotation and movement. After mounting a LED on the ultrasonic irradiation part of the device and operating the LED during irradiation, the LED light was searched to find the position of the ultrasonic irradiation on the smart-phone screen, and the irradiation position was registered and displayed on the face image based on the estimated face pose. Each task performed in the app was implemented through the thread and the timer, and all tasks were executed within 75 ms. The test results showed that the time taken to register and display 120 ultrasound irradiation positions was less than 25ms, and the display accuracy was within 20mm when the face did not rotate significantly.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.460-470
• /
• 2022

Customized cosmetics are emerging as a consumer product that companies should pay attention to in the beauty industry due to the combination of market trends and institutional introduction of customized cosmetics. In this study, six offline service brands and online service brands currently in Korea were selected to understand the current status of domestic customized cosmetics online and offline services and to derive detailed characteristics, and the cases of each brand were analyzed. The results are as follows. First, customized cosmetics services could be classified online and offline. Second, customized cosmetics brands could be divided into general brand types and brand extension types. Third, skin data measurements could be classified into genetic analysis, big data-based surveys, and device measurements. Fourth, customized cosmetics manufacturing could be classified into a device manufacturing system, a consultant manufacturing system, and an individual production process system. Fifth, customized cosmetics distribution and delivery could be classified into same-day sales, general delivery, and regular delivery. The results of this study are meaningful in that they have identified and analyzed the current status of personalized cosmetics on-line and offline systems in recent trends, and it was confirmed that creative attempts in the domestic customized cosmetics market continue to change. It is hoped that this study will provide information and ideas to the beauty industry and related experts in the future and be used as basic data for customized cosmetics marketing

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1259-1264
• /
• 2016

Ultrasonic therapy has received great attention in the field of cosmetics related to the treatment of skin thickening because of its fast recovery and safety. In this study, an output circuit of a high intensity focused ultrasound system was developed for the treatment of beauty. To verify the applicability of the high intensity focused ultrasound system to the cosmetic treatment field, we measured and analyzed the 3D ultrasound intensity energy using a hydrophone. And high-intensity focused ultrasound devices were found to be useful for cosmetic treatment.

• Medical Lasers
• /
• v.9 no.2
• /
• pp.110-118
• /
• 2020

The non-ablative fractional dual laser is equipped with two types of lasers, 1550 nm and 1927 nm in one device, and was approved by the United States Food and Drug Administration in 2013. The advantages of the non-ablative fractional laser (NAFL) include fewer side effects such as erythema, edema, post-laser pigmentation, and scab formation. Thus, the NAFL is preferred by both practitioners and consumers because it is convenient and safe for use. The 1550 nm erbium glass and 1927 nm thulium lasers are representative NAFLs that have been developed separately and are often used as a single-wavelength laser with proven clinical efficacy in various indications. The 1550 nm wavelength laser penetrates the dermis layer and the 1927 nm wavelength laser is effective for epidermal lesions. Therefore, targeting the skin layer can be easily achieved with both the 1550 and 1927 nm lasers, respectively, or in combination. Clinically, the 1550 nm laser is effective in the treatment of mild to moderate sagging and wrinkles, scars, and resurfacing. The 1927 nm laser improves skin texture and treats skin pigmentation and wounds. It can also be used for drug delivery. The selection and utilization rate of NAFL has been increasing in recent times, due to changes in lifestyle patterns and the need for beauty treatments with fewer side effects and short downtime. In this study, we present a plan for safe and effective laser therapy through a review of literature. Clinical applications of the multifunctional NAFL are also described.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.394-402
• /
• 2021

The entry of an aging society and the extension of human life expectancy, the increasing interest in women's social advancement and men's appearance, and the natural interest in K-culture through media media, while receiving worldwide attention, Focus on K-Bueaty. Recently, looking at the occupation of the medical tourism field, in the case of aesthetic medicine tourism such as molding and dermatology, it has gained popularity not only in Asia such as China and Japan, but also in North America and Europe. The first external confirmation of human aging is the wrinkles on the skin of the face. Clean, wrinkle-free, elastic and healthy skin is a desire of most people. Skin condition and condition such as focused ultrasonic stimulation (HIFU: High Intensity Focused Utrasound) and low frequency, high frequency (RF: Radio Frequency), galvanic therapy using microcurrent, cryotherapy using rapid cooling, etc. Depending on the method of management, the effect of the treatment differs depending on the output and the stimulation site, etc., even in the treatment of medical equipment and beauty equipment using the same mechanism. In this research, in order to develop invasive high-frequency dermatological devices using a large number of beauty medical devices and microneedles of beauty devices, the international standards IEC 60601-2 (standards for individual medical devices) and MFDS (Ministry of) We designed and developed a high-frequency output device in compliance with the high-frequency stimulation standard announced in the Food and Drug Safety (Ministry of Food and Drug Safety). The circuit design consists of an amplifier (AMP: Amplifier) using Class-A Topology and a power supply device using Half-Bridge Topology. As a result of measuring the developed high-frequency output device, an average efficiency of 63.86% was obtained, and the maximum output was measured at 116.7W and 50.67dBm.