• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.167-174
• /
• 2014

The physical properties of textile materials and thermal physiological responses of the human subjects were evaluated with 4 different types of the army combat uniforms including US, German, Korean and general uniforms for this study. 8 male adults were used as the human subjects and the tests were done in the environmental chamber that was $25{\pm}0.1^{\circ}C$ of temperature, $65{\pm}5%$ of relative humidity and below 0.3 m/sec of air velocity. The test protocol consisted the rest period for 20 min., the exercise period for 20 min., the rest period for 20 min., the exercise period under wind condition for 20 min., and the recovery period for 20 min. The human subjects walked with 4.5 km/hr for 10 min., ran 7.5 km/hr for 10 min. during the first exercise period and walked and ran with the same speeds under 3.5 m/sec of the air velocity that simulated outdoor condition during the second exercise period. The test results of the study were as follows; The wind condition affected the skin and microclimate temperature of the human subjects lower compared to without wind condition, but had insignificant effect on the humidity control. The low air permeability of Korean uniform caused blocking the elimination of the humidity from the body and the regulation of body temperature. However, Korean uniforms could be the excellent one with the designs considering the ventilation of the uniforms and the textile fabrics with better air permeability.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.25 no.2
• /
• pp.195-203
• /
• 2012

In reared populations of Allomyrina dichotoma, commercial insects, the skin of last instar larvae was changed softer with opaque white, and infested grubs eventually died. To clarify the cause of the symptom, we collected the larvae of A. dichotoma from five farms and examined their intestinal bacterial florae using pyrosequencing technique. From those results, a member of Paenibacillus was found only in the larvae showing the symptom of disease. Through PCR analysis using a Paenibacillus specific primer set, we obtained the partial 16S rRNA gene sequence and confirmed the microbe as Paenibacillus sp. For clear identification, a whole guts was extracted from each larva showing the sign of the disease and incubated at $70^{\circ}C$ for 15 min to isolate spore forming bacteria. After then, each content of guts was cultured on $MYPGP_{NAL}$ agar medium($12.5{\mu}g/ml$ of nalidixic acid) at $30^{\circ}C$. The 16S rRNA gene sequence analysis for the isolated bacteria showed that they were closely related to P. rigui(97.9% similarity), to P. chinjuensis(96.1% similarity), and to P. soli(95.3% similarity). Additional tests including API test and cellular fatty acid composition analysis were performed, but the strain couldn't be identified at species level, suggesting it may represent novel species of the genus Paenibacillus.

• Toxicological Research
• /
• v.16 no.4
• /
• pp.302-309
• /
• 2000

The purpose of this study is to investigate toxic effects of iso-butylalcohol (iBA) in Sprague-Dawley (SD) rats under the exposure of 6 hours a day, 5 days a week for 13 weeks by inhalation, and to evaluate the occupational safety of iBA in comparison with the permissible exposure level (PEL) stipulated by the Occupational Safety and Health Administration (OSHA). iBA did not induce any abnormal changes from the aspects of clinical signs, feed consumption, ophthalmic test, urinalysis, hematology and blood chemistry during and at the terminal of the inhalation toxicity tests. We did not find any abnormal findings in the gross and microscopic observations due to the inhalation of iBA. There was no alteration in relative organ weights by the inhalation of iBA. No observed adverse effect level (NOAEL) of iBA was considered to be more than 3,000 ppm in rats under the inhalation of 6 hours a day, 5 days a week for 13 weeks. Fifty ppm of iBA, the PEL regulated by OSHA, is too conservative for working places. As iBA showed no abnormal observations in all the experimental parameters at any concentration under this experimental condition, we suggest that 150 ppm is safe enough for the PEL of iBA in the working areas, even taking into onsideration that OSHA lowered the PEL to 50 ppm for fear of the probable risk of its skin irritation.

• Clinical and Experimental Pediatrics
• /
• v.55 no.9
• /
• pp.322-329
• /
• 2012

Purpose: Aeroallergens are important causative factors of allergic diseases. Previous studies on aeroallergen sensitization rates investigated patients groups that had visited pediatric allergy clinics. In contrast, we investigated sensitization rates in a general population group of elementary school to teenage students in Incheon, Jeju, and Ulsan. Methods: After obtaining parental consent, skin-prick tests were performed on 5,094 students between March and June 2010. Elementary school students were tested for 18 common aeroallergens, whereas middle and high school students were tested for 25 allergens. The 25 allergens included Dermatophagoides pteronyssinus, Dermatophagoides farinae, pollen (birch, alder, oak, Japanese cedar, pine, willow, elm, maple, Bermuda grass, timothy grass, rye grass, orchard grass, meadow grass, vernal grass, mugwort, Japanese hop, fat hen, ragweed, and plantain), and mold (Penicillatum, Aspergillus, Cladosporium, and Alternaria). Results: The sensitization rates in descending order were 25.79% (D. pteronyssinus ), 18.66% (D. farinae ), 6.20% (mugwort), and 4.07% (willow) in Incheon; 33.35% (D. pteronyssinus ), 24.78% (D. farinae), 15.36% (Japanese cedar), and 7.33% (Alternaria) in Jeju; and 32.79% (D. pteronyssinus), 30.27% (D. farinae), 10.13% (alder), and 8.68% (birch) in Ulsan. The dust mite allergen showed the highest sensitization rate among the 3 regions. The sensitization rate of tree pollen was the highest in Ulsan, whereas that of Alternaria was the highest in Jeju. The ragweed sensitization rates were 0.99% in Incheon, 1.07% in Jeju, and 0.81% in Ulsan. Conclusion: The differences in sensitization rates were because of different regional environmental conditions and distinct surrounding biological species. Hence, subsequent nationwide studies are required.

• Journal of Nutrition and Health
• /
• v.14 no.4
• /
• pp.209-219
• /
• 1981

To evaluate long-term metabolic response of free-living Korean subjects consuming local sources adequately or slightly below habitual intake. Subjects, six male medical students aged 23-25 years were free-living, but consumed diets in the metabolic unit. They were healthy as determined from medical laborarory tests. They belong to the Korean middle-class. Temperature of outdoor during study were ranged between -2 to $26^{\circ}C$, whereas the indoor were $18-22^{\circ}C$. Animal protein ranged between 25-30% of total calorie. The three meals and a vitamin supplement to meet recommendation were given daily. Three 50day periods following the design were used to test the protein-energy adequacy of the diet. Urinary nitrogen excretion was measured daily. Fecal samples were pooled for the last 5 days of each week. Nitrogen balance was computed using 5mg N/Kg skin and miscellaneous losses. Body weight was measured daily. The study was covered on 126 metabolic observations weekly. Body weight changes were relatively stable with the energy intake of 37-44Kca1/kg, and N-balances were also relatively stable, but it was influenced by physical and or mental stress somehow. It could be assumed that the mean protein and energy requirement were $190{\pm}10mg$ N/Kg with $41{\pm}2$ Kcal/kg, and the mean digestibility of protein was 81% on these subjects with the experimental conditions. The protein requirement, however, could be cut down somewhat with some limited increaing of energy intake under parameters of N-balance and maintaining body weight. It was also observed a tendency of the requirement were getting smaller with the increase of body size.

• Journal of Haehwa Medicine
• /
• v.20 no.1
• /
• pp.11-23
• /
• 2011

Systemic Lupus Erythematosus(SLE) is an autoimmune disease invading the skin, joint, kidney, intestinal membrane, neurosystem and other organs. SLE is an autoimmune disease characterized by immune dysregulation resulting in the production of antinuclear antibodies(ANA), generation of circulating immune complexes, and activation of the complement system. In Korean medicine, lupus can be classified as acute arthritis, reddish butterfly erythema, asthenic disease, edema and so on. The cause and procedure of the diseases are flourishing noxious heat, excessive fire due to deficiency of yin, blood stasis due to stagnation of qi, internal movement of the liver-wind, congenital deficiency, exhausted vital-qi, which are treated by clearing away heat and cooling the blood, nourshing yin and extinguishing fire, treating flatulence and activating blood circulation, nourishing the blood to expel wind, invigorating the liver and kidney, invigorating qi and replenishing the blood. To experimentally examine the influence of Insam-Buja-Tang (Ginseng & Aconiti Extract, IBT) on the outbreak and development of lupus, lupus induce MRL/MpJ-Faslpr lupus-prone mice model was used. As IBT was orally administrated to a lupus model mouse, various tests such as the weight, urine protein, renal function, Lymph cell test of the spleen, Cytokine expression, histopathological analysis of kideny were performed to see the influence on the kidney and whether it work effectively on the immune function. The main purpose of this study is to evaluate the effect of IBT on MRL/MpJ-Faslpr lupus-prone mice model. The effect of IBT on MRL/MpJ-Faslpr lupus-prone mice that can have autoimmune disease similar to SLE in human was evaluated after IBT per oral in the present study.

• Geotechnical Engineering
• /
• v.9 no.3
• /
• pp.23-34
• /
• 1993

Model pile teats, using large calibration chamber in which the stress state and the relative density can be controlled, were performed in order to study on the effect of soil condition on the behavior of open-ended steel pipe pile. The model pipe pile was made up of two pipes to separately measure each component of bearing capacity of open -ended steel pipe pile. According to the tests results, pile plugging and driving resistance of the pile installed in sand were primarily dependent on the horizontal stress and the relative density. Plug bearing capacity, outside skin fricition and total bearing capacity were also mainly dependent on the horizontal stress and relative density. Moreover, the ratio of the horizontal stress acting on the outside wall of open -ended pipe pile after installation to the original horizontal stress was not nearly affected by original value of horizontal stress. It is bigger than one in the case of dense deposit, equal to one for medium deposit, and smaller than one for very loose deposit. It seems to be mainly dependent on the relative density for a given soil.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.4
• /
• pp.19-25
• /
• 2009

In this study, field pull-out tests were performed for steel pipe nailing installed foldable wedge and non-wedge type steel pipe nailing under the same test conditions. This is to evaluate pull-out resistance improvement effect of steel pipe nailing installed foldable wedge. Evaluating for field pull-out characteristics of steel pipe nailing installed foldable wedge was performed through analysis of ultimate pull-out resistance ($T_L$), ultimate unit skin friction ($q_s$, $u_{max}$), tensile normal stiffness ($K_{\beta}$), tension of nail. As a result, the steel pipe nailing installed foldable wedge have an effect of pull-out resistance increased about 30% in comparison with non-wedge type steel pipe nailing.

• Journal of the Korean Society of Costume
• /
• v.60 no.6
• /
• pp.23-36
• /
• 2010

This study set out to develop clothes made of electromagnetic wave shielding materials. Among the various worker groups exposed to electromagnetic waves for long hours, railroad workers were chosen for the study. After selecting the locations they worked, the investigator measured electromagnetic wave on the field. To examine the effects of electromagnetic wave shielding materials, I applied a lining made of electromagnetic wave shielding materials to the existing work clothes. The first experimental clothes had the silver fabric for the lining in the current working clothes, the second experimental clothes had the copper- and nickel-plate polyester placed between the outer and the lining to prevent the corrosive material from contacting the skin, and the third experimental clothes had the silver fabric for the lining and the copper- and nickel-plate polyester between the outer and the lining. The results indicate that even if a fabric is evaluated to shield electromagnetic waves after tests, it cannot completely shield electromagnetic waves emitting from everyday appliances of 60Hz. Therefore, there should be ongoing development and research efforts on fabrics that can shield electromagnetic waves to a certain degree in order to develop working clothes to alleviate fatigue for those who are constantly exposed to electromagnetic waves, relieve their anxiety, offer them psychological stability and thus help them increase job efficiency.

• Composites Research
• /
• v.17 no.6
• /
• pp.28-36
• /
• 2004

Micro-tow deformation during forming of PVC foam-fabric composite sandwich structure is investigated to find out the correlation between forming condition and material deformation. The foams used in this research are PVC foams which have 4 different densities and the fabric composite is Carbon/epoxy prepreg which is plain weave (3k) as a skin material. Tow parameters such as crimp angle and tow amplitude are measured using microscope and a proper image tool and are compared with each other. In order to find out the effect of foam deformation during forming on tow deformation the compressive tests of foams are performed in three different environmental temperatures ($25^{\circ}C$, $80{\circ}C$, $125^{\circ}C$). The microscopic observation results show that the micro tow deformations are quite different from each other with respect to the foam density and forming pressure.