• Title/Summary/Keyword: Skin Mesh

Search Result 51, Processing Time 0.029 seconds

A study on the Characteristic of Mask Sheets (마스크 팩 시트의 특성 연구)

  • Jang, Hye-In
    • Journal of the Korean Applied Science and Technology
    • /
    • v.34 no.4
    • /
    • pp.787-798
    • /
    • 2017
  • This is a study on characteristics according to the material of sheet-type mask packs being sold on the market. The absorption capacities of water soluble components such as purified water, 1.3-propanediol, 1.3-butylene glycol, glycerine, and hyaluronic acid are compared with that of various oils including cyclomethicone, dimethicone, phytosqualane, caprylic capryl triglyceride, grape seed oil, and macadamia nut oil. As a result, all of the water soluble components except purified water showed higher moisture absorption capacity as the viscosity increased. And in case of oil, all oil showed higher oil absorption capacity according to the viscosity. During this test, the mask sheets with the type of acetic acid fermented bio-cellulose showed 500~1,000 times or more absorption capacity on water soluble wetting agent or all oils, which is due to the fine mesh structure seen in the 5,000x enlarged photograph at surface structure. This mesh structure was well recognized on the cross section and these structural features enhance the absorption capacity of water and oil. It is also believed that largely contained water-soluble components and oils facilitate the discharge over time. In addition, since each mask sheet shows their characteristics according to their material, it is intended to be a basic research for manufacturing mask packs good for skin.

Study on the survival rate of fishes escaped from trawl net (트롤 탈출어류의 생존율 연구)

  • Cho, Sam-Kwang;An, Heui-Chun;Shin, Jong-Keun;Yang, Yong-Su;Park, Chang-Doo;Lee, Ju-Hee
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.42 no.2
    • /
    • pp.69-77
    • /
    • 2006
  • The aim of this study was to develope a fishing technology for fisheries management for improving the survival rate of young fishes escaped from trawl net. Sea experiments were carried out to investigate the survival rate of the fishes in off Geomun island and Korean southern sea. Cover-net fish cage was designed and manufactured to collect fishes escaped from COD(codend) and TED(trawl escapement device). Fish cage was installed in a shallow site where scuba diver can observe the surviving fishes after separating the cage from trawl net. Most of fishes except horse mackerel(Trachurus japonicus) and mackerel(Scomber japonicus) could escaped through TED(bar space 35mm) easier than COD(mesh size 54mm). Especially, escapement rate of redlip croaker(Pseudosciaena polyactis) escaped from TED was the highest as 73.9%. Survival rate of horse mackerel(Trachurus japonicus) escaped from TED was 85.5% at the point of 96 hours over, while the survival rate for COD showed a rapid decrease according to the time elapse as 85.0% at the point of 24 hours, 76.4% for 48 hours, 62.7% for 72 hours and 56.1% for 96 hours. Over 90% of red seabream(Pagrus major) and rock bream(Oplegnathus fasciatus) escaped from TED were survived 96 hours over and the survival rate of those fishes were excellent compared with the other fish species. All korean pomfret(Pampus echinogaster) escaped from both COD and TED were died within 48 hours. Most of redlip croaker(Pseudosciaena polyactis) were also died within 12 hours because of the weak physiological characteristics by water pressure change. Survival rate of fishes like as horse mackerel(Trachurus japonicus) having hard skin was high while it was low for the fishes like as squid(Todarodes pacificus) and hair-tail(Trichiurus lepturus) having soft skin. We could know that there were big differences in the survival rate offish species escaped from trawl net.

Recognition of Complication of Superficial Brachial Axial Pattern Flap in a Dog (표층상완축상피판이식술과 전층망상식피술의 적용 예)

  • Kim, Se-Hoon;Heo, Su-Young;Cho, Young-Kwon;Lee, Hae-Beom;Lee, Ki-Chang;Kim, Min-Su;Kim, Nam-Soo
    • Journal of Veterinary Clinics
    • /
    • v.26 no.6
    • /
    • pp.637-640
    • /
    • 2009
  • A 13-year-old female 30 kg Korean Jin-do dog was presented with severe defects due to vasculitis and perivascular dermatitis at the left antebrachium area. A left superficial brachial axial pattern flap was elevated to cover the defect and the wound was covered. However, one week post surgery, the flap was survived about 1/3 of total flap length. Remaining two thirds defects were performed by the free skin mesh graft as an additional method. After ten days, the entire wound was achieved completely. Skin flaps carry own blood supply in other hands, the flap method is dependent upon continuation of adequate circulation until vascularization takes place. Because they are much thicker than other grafts, this is a slower process and the flap method is vulnerable to problems with kinking or tension of the base. According to this case, a practician has to consider length of flap and thickness in order to vascular perfusion when superficial brachial axial pattern flap is performed in a dog.

Analysis and reduction of thermal magnetic noise in liquid-He dewar for sensitive low-field nuclear magnetic resonance measurements

  • Hwang, S.M.;Yu, K.K.;Lee, Y.H.;Kang, C.S.;Kim, K.;Lee, S.J.
    • Progress in Superconductivity and Cryogenics
    • /
    • v.15 no.2
    • /
    • pp.20-23
    • /
    • 2013
  • For sensitive measurements of micro-Tesla nuclear magnetic resonance (${\mu}T$-NMR) signal, a low-noise superconducting quantum interference device (SQUID) system is needed. We have fabricated a liquid He dewar for an SQUID having a large diameter for the pickup coil. The initial test of the SQUID system showed much higher low-frequency magnetic noise caused by the thermal magnetic noise of the aluminum plates used for the vapor-cooled thermal shield material. The frequency dependence of the noise spectrum showed that the noise increases with the decrease of frequency. This behavior could be explained from a two-layer model; one generating the thermal noise and the other one shielding the thermal noise by eddy-current shielding. And the eddy-current shielding effect is strongly dependent on the frequency through the skin-depth. To minimize the loop size for the fluctuating thermal noise current, we changed the thermal shield material into insulated thin Cu mesh. The magnetic noise of the SQUID system became flat down to 0.1 Hz with a white noise of 0.3 $fT/{\surd}Hz$, including the other noise contributions such as SQUID electronics and magnetically shielded room, etc, which is acceptable for low-noise ${\mu}T$-NMR experiments.

An Aircraft CLAS Antenna Design using Composite Magneto-dielectric Material (복합자성유전체를 이용한 항공기 CLAS 안테나 개발)

  • Kim, Yo-Sik;Bae, Ki-Hyoung;Yu, Byung-Gil;Kim, Min-Sung;Park, Chan-Yik
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.41 no.10
    • /
    • pp.820-826
    • /
    • 2013
  • In this paper, a compact and wideband CLAS(Conformal Load bearing Antenna Structure) was studied using smart skin technique. In order to satisfy the electrical performance of the CLAS antenna, the proposed CLAS antenna is composed of conductive mesh, face-sheet, radiator, honeycomb, housing. Especially, radiator is composed of composite magneto-dielectric material and radiating element etched on the PCB (Printed Circuit Board). The radiating element is inserted into the composite magneto-dielectric material and has sloted Folded LP(Log Periodic) structure. By fabricated composite magneto-dielectric, the resonance frequency is decreased and the impedance matching characteristics is improved. We verified that the antenna has wideband characteristics and compact size using the antenna test results.

Early Definitive Closure of an Open Abdomen by Using Porcine Dermal Collagen Graft: A Case Report (외상환자의 손상통제 수술 후 돼지진피아교질 이식편을 이용한 조기 완전 폐복의 사례보고)

  • Park, Sung Jin;Kim, Jae Hun;Yun, Sung Pil;Choi, Sun Woo;Kim, Seon Hee
    • Journal of Trauma and Injury
    • /
    • v.26 no.1
    • /
    • pp.14-17
    • /
    • 2013
  • Purpose: The open abdomen is now the standard of care in various clinical situations, especially it is used to treat abdominal compartment syndrome. Many techniques have been reported for closure after an open abdomen, but most take a long time for complete definitive closure and are associated with various problems. We describe a technique using biologic mesh that can achieve early definitive closure after an open abdomen. Methods: A 45-year-old man presented to the emergency room with a painful hip and painful lower extremities after a fall from 80 feet. Radiologic examination revealed multiple fractures of the pelvis and low extremities. Abdominal compartment syndrome caused by a retroperitoneal hematoma developed during the orthopedic surgery. We performed exploration immediately and closed abdomen temporarily. A peritoneal graft of porcine dermal collagen with anterior myofascial approximation of the rectus abdominis muscles and sliding skin flap was performed three days after the previous surgery. Results: There were no complications related to the wound. The patient was transferred to the Department of Orthopedic Surgery seven days after the initial surgery. Conclusion: Early definitive closure using porcine dermal collagen is a feasible method that can reduce the length of hospitalization and the number of operations for an open abdomen.

Optimum arrangement of stiffener on the buckling behaviour of stiffened composite panels with reinforced elliptical cutouts subjected to non-uniform edge load

  • Kalgutkar, Akshay Prakash;Banerjee, Sauvik;Rajanna, T.
    • Steel and Composite Structures
    • /
    • v.42 no.4
    • /
    • pp.427-446
    • /
    • 2022
  • Cutouts in the beams or plates are often unavoidable due to inspection, maintenance, ventilation, structural aesthetics purpose, and sometimes to lighten the structures. Therefore, there will be a substantial reduction in the strength of the structure due to the introduction of the cutouts. However, these cutouts can be reinforced with the different patterns of ribs (stiffener) to enhance the strength of the structure. The present study highlights the influence of the elliptical cutout reinforced with a different pattern of ribs on the stability performance of such stiffened composite panels subjected to non-uniform edge loads by employing the Finite element (FE) technique. In the present formulation, a 9-noded heterosis element is used to model the skin, and a 3-noded isoparametric beam element is used to simulate the rib that is attached around a cutout in different patterns. The displacement compatibility condition is employed between the plate and stiffener, and arbitrary orientations are taken care by introducing respective transformation matrices. The effect of shear deformation and rotary inertia are incorporated in the formulation. A new mesh configuration is developed to house the attached ribs around an elliptical cutout with different patterns. Initially, a study is performed on the panels with different stiffener schemes for various ply orientations and for different stiffener depth to width ratios (ds/bs) to determine an optimal stiffener configuration. Further, various parametric studies are conducted on an obtained optimal stiffened panel to understand the effect of cutout size, cutout orientation, panel aspect ratio, and boundary conditions. Finally, from the analysis, it can be observed that the arrangement of the stiffener attached to a panel has a major impact on the buckling capacity of the stiffened panel. The stiffener's depth to width ratio also significantly influences the buckling characteristic.

Anti-wrinkle Compounds Isolated from the Seeds of Arctium lappa L. (우방자에서 분리한 주름개선 화합물)

  • Hwang, Ju-Young;Park, Tae-Soon;Kim, Dong-Hee;Hwang, Eun-Young;Lee, Jung-Noh;Lee, Ji-Young;Lee, Ghang-Tai;Lee, Kun-Kook;Son, Jun-Ho
    • Journal of Life Science
    • /
    • v.22 no.8
    • /
    • pp.1092-1098
    • /
    • 2012
  • This study was carried out to discover the skin wrinkle reducing components in the seeds of Arctium lappa. The isolation of a methylene chloride-soluble fraction of 70% ethanol extract from the seeds of Arctium lappa using a procollagen type-1 synthesis and MMP-1 activity resulted in the isolation and identification of four lignin compounds: arctiin, arctigenin, matairesinol, and diarctigenin. All structures were confirmed via NMR and MS spectroscopic data. To determine cell viability and procollagen type-1 synthesis, human dermal fibroblasts were treated with 10-100 ${\mu}M$. As a result, none of the four compounds showed cytotoxicity up to 50 ${\mu}M$. We also investigated their procollagen type-1 synthesis and MMP-1 inhibition activity and found that arctiin had the highest activity in terms of both procollagen synthesis and MMP-1 inhibition among all four compounds. Putting all the data together, we suggest that arctiin be used in cosmetics as an anti-wrinkle material.

Determination of 3-phenoxybenzoic Acid in Urine and Exposure Assessment of Pyrethroid Insecticides to Human Being (요중 3-phenoxybenzoic acid 미량 분석 및 pyrethroid계 살포자 노출 평가)

  • Seo, Jong-Chul;Song, Jae-Seok;Choi, Hong-Soon
    • The Korean Journal of Pesticide Science
    • /
    • v.11 no.2
    • /
    • pp.87-94
    • /
    • 2007
  • Pyrethroid insecticide have widely been used for agricultural sector and residential environments. To assess the exposure of insecticide which is absorbed through skin the analysis of urinary metabolite is essential. At present, the urinary 3-PBA was analyzed using liquid-phase extraction. But LPE have many limitations, such as long pre-treatment time and low recovery. So, this study was conducted to determine the optimum conditions for analysing 3-PBA in urine using solid phase extraction. Furthermore, this study intend to investigate the relation of concentrations of pyrethroid, deltamethrin in air and 3-PBA in urine. The optimum condition for hydrolysis was found to be done with hydrochloric acid for one hour. The recovery rates of 3-PBA were $84.6%{\pm}1.2%$, $54.8{\pm}0.9%$, $99.8{\pm}1.2%$ with XAD-2, XAD-7, XAD-16 using as the aborbents and acetone as eluents respectively. But acetonitrle and methanol gave low recovery rate and methyl cellosolve could not elute the compound. The amount of acetone for elution were 6mL, 9mL, 3mL for XAD-2, XAD-7, XAD-16 as absorbents respectively. The non-absorbed rates was $0.8{\pm}0.5%$, and $0.7{\pm}0.3%$ under XAD-16, mesh size 140-200, amount of resin 1.4g and the flow rate of eluent was 0.1mL/min. In the concentration process, we obtained 11 times higher concentration of material. The amounts of urinary 3-PBA were. The LODs of 3-PBA and deltamethrin were 0.004 mg/L, 0.038 mg/L, respectively. The further research of minute monitoring which include spray pattern, environmental condition is needed And more research about the relation between total pyrethroid exposure and urinary various metabolite are also necessary.

Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes (상품성 제고를 위한 고구마 수확 후 관리 및 출하기술)

  • Jeong, Byeong-Choon
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2001.06a
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.