• Journal of KIISE
• /
• v.43 no.5
• /
• pp.516-523
• /
• 2016

For old-age makeups, makeup artists first make a mold cast of an actor's face using plaster and then sculpt wrinkles in clay on the plaster mold. After finishing the clay sculpture, its negative plaster mold is fabricated and silicone skin patches are finally made for application to the actor's face. This process takes a few days and is tedious for actors and makeup artists. With recent advances in 3D printing and scanning technology, it is becoming easier to scan and fabricate 3D faces. This paper presents a new pipeline composed of facial scanning, interactive wrinkle modeling, and mold printing stages to easily and efficiently fabricate silicone masks for old-age makeups without the use of plaster and clay. An intuitive sketch interface based on a normal map is proposed for the creation of wrinkles in real time, even with a high-resolution face model. Then the geometry of the final wrinkles is reconstructed using a depth map and the negative mold of the wrinkled face is printed. We also show that the presented pipeline can fabricate a silicone mask more conveniently than the traditional one that consists of pouring silicone into the prepared negative mold and then overlapping the mold with the original positive one.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.5
• /
• pp.708-716
• /
• 2012

In order to investigate and evaluate the effects of red deer antlers on hair growth in the full-thickness wound healing model, Sprague-Dawley rats were given incision wounds through the full thickness of their dorsal skin and deer antler was applied for 40 days. At specified intervals thereafter (4, 8, 16, 32 and 40 days), the animals were sacrificed and the wound site skins were excised, processed, and sectioned. At post-injury days 16, 32 and 40, longer and more active new hair appeared around the healing wound of antler-treated skin. Histological studies showed that the antler extract markedly increases the depth, size, and number of hair follicles. Expression of IGF-I (insulin-like growth factor) mRNA was detected by RT-PCR and real time RT-PCR. The result showed that the expression of IGF-I (days 16, 32, and 40) was obviously up-regulated in antler-treated skins compared to control skins. Similar results were seen in the ELISA analysis to quantify the IGF-I expression. These results support the notion that wound healing can cause hair growth by enhancing the expression of IGF-I. Deer antler extract appears to have the potential to promote hair growth and could be used in hair growth products.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.502-506
• /
• 2009

"Hongyoung" was bred within the potato breeding program of National Institute of Highland Agriculture (NIHA). It was originated from a cross made between Atlantic as a female and AG34314 as a male parent in 2003. "Hongyoung" was evaluated as a clone number Daegwan 1-102 for the growth and tuber characteristics, yielding ability, and resistance to major diseases in the regional yield trials from 2006 to 2007. Finally, this clone was renamed as "Hongyoung" and was presented to Korean Seed & Variety Service in 2007 for registration as a new potato cultivar. "Hongyoung" has a round shape, shallow eye depth, red skinned and fleshed tuber characteristics. Its mean tuber yields from the regional yield trials was 37.4 MT/ha, and it showed the highest yield in spring cropping. "Hongyoung" showed high resistance to common scab (Streptomyces scabies) and potato leaf roll virus (PLRV), however it was susceptible to both potato virus Y (PVY) and late blight (Phytophthora infestans). The dry matter content of "Hongyoung" was low to medium 17.7%, therefore it is suitable for table use. Its anthocyanin content was the highest in autumn cropping with 31.8 mg/100g fresh weight and it contained 3.6 times higher anthocyanin than the control, Jasim.

• Journal of Environmental Health Sciences
• /
• v.48 no.5
• /
• pp.282-289
• /
• 2022

Background: Airborne fungi are ubiquitous in the air and exposure to an airborne fungus can be a significant risk factor. The composition of fungi has been potentially important for human health, especially for respiratory diseases like asthma and atopic dermatitis. Therefore, we attempted to ascertain what kind of airborne fungi affect human health at a nationwide level. Objectives: This study was carried out to provide information on indoor fungi distribution at multi-use facilities throughout South Korea. Methods: We classified our data by region and public facility after collection, cultivation, and identification via the sequencing of the ITS (internal transcribed spacer) region. We investigated whether or not the proliferation of HaCaT cells was affected by the identified airborne fungi. Results: In our data, the most isolated airborne fungi by region were Penicillium spp (Seoul, Daegu), Periconia sp (Gyeonggi-do), Iprex sp (Gangwon-do), Phanerochaete sp (Busan), Bjerkandera sp (Gwangju), and Aspergillus sp (Jeju-do). In the public facilities, the most detected fungi were Cladosporium sp (public transport), Penicillium sp (apartment house, retail market, financial institution, karaoke room), Bjerokandera sp (underground parking lot, public toilet, medical institution), Periconia sp (retail store), and Fusarium sp (general restaurant). Next, we selected twenty airborne fungi to examine their cytotoxicity and proliferation of human skin cells. In this experiment, the proliferation of the cells was influenced by most of the identified fungi. In case of the cytotoxicity test, most genera except for Rhodotorula sp and Moesziomyces sp showed cytotoxicity in HaCaT cells. Conclusions: The distribution of mold in the indoor air in multi-use facilities in South Korea differs from region to region, and this is an indicator that should be considered in future health impact studies. In addition, as a result of culturing about 20 types of bacteria dominant in indoor air, it was found that most (90%) inhibit the growth of skin cells, which can be harmful to health. An in-depth study of the health effects of floating fungi is needed.

• Korean Journal of Acupuncture
• /
• v.40 no.4
• /
• pp.141-148
• /
• 2023

Objectives : The purpose of this study is to investigate on the application of the yttrium aluminum garnet (YAG) lasers for acupoints irradiation. Methods : We conducted a systematic search for peer-reviewed studies published from inception to November 2023, in the following electronic databases: PubMed, Scopus, and Web of Science in English, Science ON, Oriental Medicine Advanced Searching Integrated System (OASIS) and Research Information Sharing Service (RISS) in Korean, and China National Knowledge Infrastructure (CNKI) and Wanfang in Chinese, and Japan Science Technology Information Aggregator, Electronic (J-STAGE) and Citation Information by NII (CiNii) in Japanese. Inclusion criteria were original articles including clinical and experimental studies related with YAG lasers for acupoints including Ashi or meridian sinews. Results : Among the 8 selected studies, there were 7 studies on human subjects and 1 study on animals, 7 studies on Nd:YAG (1,064 nm) laser, and 1 study on Er:YAG (2,940 nm) laser. A total of 16 acupoints were used, 15 of which were in the face and 1 of which was located in the foot. In addition, there were two studies using Ashi. 4 studies looked at the effect of pain relief, 2 studies looked at safety, 1 study looked at changes in blood flow, and 1 study looked at the effect of skin care. There were no reported adverse events, and the YAG laser was confirmed to be safe and effective in pain relief, beautifying the skin, and increasing blood flow. Conclusions : We suggest that high intensity YAG lasers can be applied to laser acupuncture or laser moxibustion. YAG lasers are considered to be worth using for various clinical indications of Korean medicine because of photobiomodulation effects, analgesic action, and deep penetration depth. Further scientific research and clinical evidences should be warranted.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.16-24
• /
• 2019

The corrosion amounts of steel structures can be different depending on their installation condition and height. Thus, their corrosion maintenance should be considered depending on installation conditions of local structural members. In this study, an atmospheric exposure test was conducted to evaluate the corrosion amount and the corrosion rate depending on the installation condition and height of a steel water gate using monitoring steel plates and corrosion environment measuring sensors. The mean corrosion depth was evaluated using the weight loss method and the galvanic corrosion current was measured by corrosion environment measuring sensors. Local corrosion rate of local structural member in steel water gate was estimated using measured mean corrosion depths and galvanic corrosion currents. From this measurement results, the corrosion damage in horizontal member of the cross beam was highly evaluated than those of other structural member as skin plate, etc. The relative difference in the corrosion rate of a local structural member could be highly affected by local corrosion environments of steel water gate members. Therefore, an appropriate maintenance method should be considered for local corrosion damages of local structural members determined by local corrosion environments of a steel water gate.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.3
• /
• pp.28-39
• /
• 2010

In this paper, a new method to estimate MU (motor unit) location in the short head of BIC (biceps brachii) muscle using surface EMG (electromyogram) is proposed. The SMUAP (single motor unit action potential) is generated from a MU located at certain depth from the skin surface. The depth is referred as MU location. For estimating muscle force precisely, the information of the MU location is required. The reference SMUAPs are simulated based on anatomical structure of human muscle, and compared with acquired real EMG signals using 3-channel surface EMG electrode. The proposed method was compared with the results of previous researchers and verified its accuracy by computer simulation. From the simulation result in case of the MU located in 8[mm], the average estimation error of proposed method was 0.01[mm]. But the average estimation error of Roeleveld's method was 2.33[mm] and Akazawa's method was 1.70[mm]. Therefore the proposed method was more accurate than the methods of previous researchers.

• Journal of Korean Academy of Nursing
• /
• v.17 no.3
• /
• pp.227-240
• /
• 1987

Infection has assumed increased importance as a cause of death among thermally injured individuals. Decreased treatment effectiveness and an increase in mortality are the hallmarks of nosocomial infection. Infection control is a monumental task that must be achieved to reduce mortalities. This was a retrospective study to survey the epidemiological features of nosocomial infections in a burn unit and to identify the possibilities for infection control. During the past 6 year 2 month period from July, 1981 to August, 1987, 306 burn patients were treated in the burn unit of university hospital. Among of these, 290 cases were the subjects of this study. The data were collected from the patients' records after discharge. All data collected were analyzed using percent, x$^2$-test, t-test with SPSS program. The results of this study are summariged as follows: 1) Infection rate was 40%. According to site, there were 67 cases of wound infection, 60 cases of post-operative skin graft infection, 20 cases of septicemia and 20 cases of donor site infection. As far as the burn size was concerned, the infection rate for patients whose burn size ranged 61 to 70%, was shown to be 100%, followed by the infection rate of 93.8%, for patients whose burn size ranged from 41~50%. As far as the period of time over which the infection developed, 5 to 7 days showed the highest frequency. Further infection was the main cause of deaths and complications. 2) Based upon the results obained by comparing the general characteristics, between a hospital infection-group and non-hospital infection group, there was a significant defference according to age, the time of the year when the accident happened, the place of accident or length of hospital-admission. And according to the result obtained by comparing the general characteristics of the burn, there was a significant difference according to burn size, burn depth, burn type, and burn site. And also based upon the result obtained by comparing the two groups according to method of treatment, there was a significant difference according to the use of antibiotics and to the type of wound-treatment, and for the 8 different binds of treatment related to infection, there was a significant difference for all. In conclusion, age, length of hospital-admission, burn size, burn type, burn site, burn depth, type of woundtreatment and the 8 different binds of treatment, which are related to burns, were shown to be the factors which affect the infection rate in burn patients.

• Journal of Acupuncture Research
• /
• v.17 no.4
• /
• pp.18-27
• /
• 2000

There is a acupuncture method which make a difference according to the four seasons, according to body region or depth in skin. We call it Acupuncture follow the four seasons(四時刺法). In several chapters of Huangdineijing(黃帝內經) introduced Acupuncture follow the four seasons. Acupuncture follow the four seasons has two kinds of acupuncture method that is to acupuncture at body region and to acupuncture at five Su points(五兪穴). To use five Su points(五兪穴) according to Yongchu(靈樞) disagree with Nanjing(難經). In Yongchu(靈樞), the five phases property disagree with five Su points(五兪穴), but in Nanjing(難經) the five phases property agree with five Su points(五兪穴). Even if we can acupuncture the same point, there will be the different effect according as what is the purpose of doing acupuncture, and when we do acupuncture. That is to say, we can use apucupuncture for the purpose of prevention in Yongchu(靈樞), and for the purpose of healing the disease in Nanjing(難經). Therefore, because we select the point on the base of meridian Kis origin which spring out, we have to acupuncture Chong point(井穴) in winter according to Yongchu(靈樞). Because we select the point on the base of meridian Kis origin which flowing, we have to acupuncture Chong point(井穴) in spring according to Nanjing(難經). And in the base of five phases' property, the purpose of selecting five Su points(五兪穴) is the prevention according to Yongchu(靈樞), and the healing according to Nanjing(難經). So even though we acupuncture the exactly same Chong point(井穴), we can expect the effect that acupuncture method supply Ki for liver in winter. and the effect that it extract pathogenic Ki(邪氣) from the liver in spring.

• Journal of Acupuncture Research
• /
• v.25 no.3
• /
• pp.221-228
• /
• 2008

Objectives : The purpose of this study is to understand the anatomical basis of the facial muscles and to apply this knowledge on the clinical practice of facial acupuncture. Methods : We searched both contemporary and the latest literatures on the practical application of facial muscle anatomy on Facial Acupuncture. Conclusions : Facial Acupuncture improves skin tone, texture and wrinkling by assisting the circulation of Ki. It stimulates the facial muscles directly to undo the stagnation of the meridians. To practice Facial Acupuncture, thorough understanding of facial anatomy is required. In this study the muscles of the head and neck, appropriate depth and angle of acupuncture needle, etc. were reviewed. The upper facial muscles including frontalis, procerus, corrugator supercilii and orbicularis oculi, the mid facial muscles including auricularis, nasalis, levator labii superioris, zygomaticus and so on, and the lower facial muscles including orbicularis oris, depressor labii inferioris, depressor anguli oris, mentalis and platysma etc. were reviewed in this study. For safer and more effective use of Facial Acupuncture, further study on the objective outcome of the technique should be done.