• Journal of Korean Port Research
• /
• v.3 no.1
• /
• pp.35-55
• /
• 1989

Today, about 99% of total import and export cargo in Korea is being transported through the port. The general trends of cargo handling show increases in capacity and speed, In order to cope with these trends, it is not only required to raise the efficiencies of port operation and function but also necessary to decide the optimal amount of the skilled labor force for cargo handling in the port. Cargo handling in the port is basically relied on the cargo handling facilities. Therefore, it is very important to reserve the amount of labor force for cargo handling system has been developed up to a certain level but the personnel management system which is the superior structure has not been followed well. In this study, therefore, we show a method to determine the required amount of labor force for cargo handling considering the amount of cargo and type of cargo handling work per each cargo, and the optimal amount labor force in cope with the fluctuation of the basic cargo handling labor force with respect to the time of in and out cargo flow in the viewpoint of minimizing the expences due to reservation of extra labor force than needed and firing employment of labor force using the Dynamic Programming. The derived algorithm is introduced into the computer simulation for Pusan port with the analyzed real data such as amount of cargo handling in the port with respect to working hour, cargo capacity, working step, the ratio of cargo handling facility and actual number of workers and we estimated the required labor force. As a result of analysis the labor force of Pusan port showed the over-employment such as maximum 21.4%, minimum 8.2% when we assumed that the averages of actual working hours and days were 8 hours in a day and 20 day in a month.

• Journal of Digestive Cancer Research
• /
• v.5 no.1
• /
• pp.23-27
• /
• 2017

Although laparoscopic pancreaticoduodenectomy (LPD) is considered as minimally invasive surgery, an advanced level of laparoscopic skill is still required. LPD comprises various procedures including reconstruction. Therefore, establishment of a safe approach at each step is needed. Prevention of intraoperative bleeding is the most important factor in safe completion of LPD. The establishment of effective retraction methods is also important at each site to prevent vascular injury. I also recommend the "uncinate process first" approach during initial cases of LPD, in which the branches of the inferior pancreaticoduodenal artery are dissected first, at points where they enter the uncinate process. This approach is performed at the left side of the superior mesenteric artery (SMA) before isolating the pancreatic head from the right aspect of the SMA, which allows safe dissection without bleeding. Safe and reliable reconstruction is also important to prevent postoperative complications. Laparoscopic pancreatojejunostomy requires highly skilled suturing technique. Pancreatojejunostomy through a small abdominal incision, as in hybrid-LPD, facilitates reconstruction. In LPD, the surgical view is limited. Therefore, we must carefully verify the position of the pancreaticobiliary limb. A twisted mesentery may cause severe congestion of the pancreaticobiliary limb following reconstruction, resulting in severe complications. We must secure the appropriate position of the pancreaticobiliary limb before starting reconstruction. We describe the incidence of intraoperative and postoperative complications and appropriate technique for safe performance of LPD.

• Journal of Korean Society of Forest Science
• /
• v.51 no.1
• /
• pp.56-65
• /
• 1981

The training of forest ranger level and forest worker level to push the sound forest management and to increase the employment effects in forestry will be done without delay as soon as possible. So several opinions to be considered are here discussed. 1. The ranger level will be at first completely trained with the technics developed and modernized, to process really the sound forest management based on the concept of ecological and economical technic. 2. The organization of vocational training and it's systematical training method will be newly adopted to increase the labour efficiency in forestry. The case of fulltime worker level should be more intensively trained and part-time worker or forest famer level should be trained by the forest ranger and skilled worker with visiting circularly their working place. And the daily employed workers and village people for working should be done by the skilled workers. 3. The training subjects for them at the beginning step will be exploited by the instructors and concerned experts with studying their current conditions. Their practical training is more reasonable to do in the practically managing forest and to carry out under the responsible of leader of this forest. 4. The instructors included rangers of training forest will get specially certain intensive training through the aids of outside experts or through the group instruction with them. 5. The training fields and their reasons to be learned by them are discussed in this paper from the basic knowledge to the skill technics. 6. In oder to systematize and mordernize more rapidly our forest technics that need for training them and also applying directly in the forest management, a total effort of certain type by scientists and technicians scattered individually all over the country is now earnestly demanded to synthesize their knowledge, technic and experience. So to do like this, the establishment of certain organization through which can do their total efforts together will be considered and assisted by the concerned authority. 7. For better lieving of full-time workers, the whole-round year working amount have to be supplied though the work technic-and working plan development. And under the conditions that the timber harvesting work is still not so enough and it has a bad climatic season, the in-side working system and side - job aids will be developed for their sound lieving. 8. The organization of labour management will be soon introduced in the concerning administrativ authority to solve the forest labour problems and to increase the employing effects in forestry in future. 9. The supply programm of improved and trained tools and maschines for forest work is also considered to use by the trained persons. If not to do so, the training results will return to the original condition and will get nothing any more.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.363-375
• /
• 2013

Today, a shortage of the skilled operator has been intensified gradually and the necessity of an earthwork in extreme environment operators are difficult to access is increasing for the purpose of resource development and new living space creation. For this reason, an effort to develop an unmanned excavation robot for fully automated earthwork system is continuing globally. In Korea, a research consortium called 'Intelligent Excavation System' has been formed since 2006 as a part of Construction Technology Innovation Program of Ministry of Land, Transport and Maritime Affairs of Korea. Among detailed technologies of the Task Planning System is one of the core technologies of IES, this paper explains research and development process of the Local Area Design Module, which provides informatization unit to create automated excavators' work command information at operation level such as location, range, target, and sequence for excavation work. Designing of Local Area should be considered various influential factors such as excavator's specification, working mechanism, heuristics, and structural stability to create work plan guaranteed safety and effectiveness. For this research, conceptual and detail design of the Local Area is performed for analyzing design element and variable, and quantization method of design specification corresponding with heuristics and structural safety is generated. Finally, module is developed through constructed algorithm and developed module is verified.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.24-34
• /
• 2013

Since 2004, the government decided to gradually introduce Actual Cost Data into cost estimate for improving problems of below-cost tendering and to reflect fair market price through competition and carry contract efficiently. However, there are many concerns that Actual Cost Data has not reflected real market price, even that has contributed to reduce the government's budget. General construction firm's burden for labor cost is imputed to specialty contractors and eventually it becomes construction worker's burden. Therefore, realization of Actual Cost Data is very important factor to settle this system. To understand realization level and make short term forecast, this paper drew construction group of which labor cost constitutes more than 95% of direct cost, and compares their Actual Cost Data with relevant skilled workers's unit wage and predicts using time series analysis. The bid price which is not be reflected market price accelerates work environment changes and leads to directly affect such as late disbursement of wages, bankruptcy to workers. Therefore this paper is expected to be used to the preliminary data for solving the problem and establishing improvement of Actual Cost Data.

• Perspectives in Nursing Science
• /
• v.15 no.2
• /
• pp.49-69
• /
• 2018

Purpose: The purpose of this study was to derive contextual indicators of medical provider quality and assess their relative importance along with the individual utilization of antenatal care (ANC) and institutional births with a skilled birth attendant (SBA) in India using a multilevel framework. Methods: The 2015~2016 Demographic and Health Survey (DHS) from India was used to assess the outcomes of neonatal, infant, and under-five child mortality. The final analytic sample included 182,980 children across 28,283 communities, 640 districts, and 36 states and union territories. The contextual indicators of medical provider quality for districts and states were derived from the individual-level number of ANC visits (<4 or ${\geq}4$) and institutional delivery with SBA. A series of random effects logistic regression models were estimated with a stepwise addition of predictor variables. Results: About half of the mothers (47.3%) had attended ${\geq}4$ ANC visits and 75.8% delivered in institutional settings with SBAs. Based on ANC visits, 276~281 districts (43.1~43.9%) and 13~16 states (36.5~44.4%) were classified as "low" quality areas, whereas 268~285 districts (41.9~44.5%) and 8~9 states (22.2~25.0%) were classified as "low" quality areas based on institutional delivery with SBAs. Conditional on a comprehensive set of covariates, the individual use of both ANC and SBA were significantly associated with all mortality outcomes (OR: 1.17, 95% CI: 1.08, 1.26, and OR: 1.10, 95% CI: 1.02, 1.19, respectively, for under-five child mortality) and remained robust even after adjusting for contextual indicators of medical provider quality. Districts and states with low quality were associated with 57~61% and 27~43% higher odds of under-five child mortality, respectively. Conclusion: When simultaneously considered, district- and state-level provider quality mattered more than individual access to care for all mortality outcomes in India. Further investigations are needed to assess the importance of improving the quality of health service delivery at higher levels to prevent unnecessary child deaths in developing countries.

• Journal of Korean Society of Forest Science
• /
• v.85 no.2
• /
• pp.180-194
• /
• 1996

The Working Unit of Forestry Management Cooperatives has been organized by the training and extention service center since 1984 so as to take charge of forestry work of Forestry Management Cooperatives, and this study has been carried out in order to find the problem of Working Unit of Forestry Management Cooperatives, and to show how to solve it in the future. We analyzed a material gained by the immediate questionnaires to 33 members of 4 Working Unit of Forestry Management Cooperatives in Ulsan-Kun, and 10 members of Working Unit of Forestry Management Cooperatives in Jinan-Kun between July and August in 1993. Later, we found that there was an almost inactive Working Unit caused by the insufficient work amount, which resulted in inefficient skill and forestry work due to leave of the skilled forestry worker. Though the government concentrates on bringing up the Working Unit centered by the specialized laborer, it is concluded that bringing up the Working Unit should consider local labor market, organization of agriculture and forestry, organization of labor, level of wage, and the amount of forestry work.

• Journal of the Korean Geographical Society
• /
• v.51 no.3
• /
• pp.401-420
• /
• 2016

This study aims to investigate the changes in the occupational structure of employment in Korea during the last three decades, in which have transformed from industrialized economy to knowledge-based economy very rapidly as well as having experiences of both IMF and financial crisis. For this purpose, we analyze the trends occupational distribution and the socio-demographic characteristics of the occupational structure of employment since 1980. By applying correspondence analysis of Multidimensional Scaling(MDS) methods, we examine the inter-relationships between the employed persons by occupation and their characteristics such as gender, age group, educational attainment, industry, region. We found the occupational structure of Korea has been changed dramatically with the socio-economic transformations during the last four decades. In particular, the occupational (job) structure has been highered in general. However, it has also been dualized extremely into two groups, one is the specialized-skilled-white color jobs and the other is the simple-unskilled-blue color jobs. The results of this study could be utilized as the importation basis for the provision of labour supply and employment policy plan at the national level as well as at the local level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.967-977
• /
• 2018

The problems of lack of skilled worker and poor productivity at the construction site continue to be raised, and the introduction of construction automation as one of the solutions to this has been considered. The development of various types of equipment and systems has been carried out, especially for earthwork operations with multiple construction equipment. However, the level of commercialization of developed equipment or systems is very limited. Although the single-product type of earthwork equipment has been applied to the site, the integrated type of earthwork system is still in the field testing stage. Considering these constraints, the limited budget and research period, a strategy is needed to identify which technology areas and core technologies should be developed first. In this study, the technology areas and detailed core technologies that are essential for the development of earthwork systems at the level of commercialization are set and the priority of development is determined. In addition, the earthwork system that has been developed so far is analyzed and the detailed development direction is presented based on it. The findings can be used for a decision making to set the priority for core technologies that should be developed first in the limited budget and period.