• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제37권6호
• /
• pp.457-463
• /
• 2011

Introduction: This study evaluate the soft tissue changes to the upper lip and nose after Le Fort I maxillary posterosuperior rotational movement. Materials and Methods: Twenty Skeletal class III patients, who had undergone bimaxillary surgery with a maxillary Le Fort I osteotomy and bilateral sagittal split ramus osteotomy, were included in the study. The surgical plan for maxilla was posterosuperior rotational movement, with the rotation center in the anterior nasal spine (ANS) of maxilla. Soft and hard tissue changes were measured by evaluating the lateral cephalograms obtained prior to surgery and at least 6 months after surgery. For cephalometric analysis, four hard tissue landmarks ANS, posterior nasal spine [PNS], A point, U1 tip), and five soft tissue landmarks (pronasale [Pn], subnasale [Sn], A' Point, upper lip [UL], stomion superius [StmS]) were marked. A paired t test, Pearson's correlation analysis and linear regression analysis were used to evaluate the soft and hard tissue changes and assess the correlation. A P value <0.05 was considered significant. Results: The U1 tip moved $2.52{\pm}1.54$ mm posteriorly in the horizontal plane (P<0.05). Among the soft tissue landmarks, Pn moved $0.97{\pm}1.1$ mm downward (P<0.05), UL moved $1.98{\pm}1.58$ mm posteriorly (P<0.05) and $1.18{\pm}1.85$ mm inferiorly (P<0.05), and StmS moved $1.68{\pm}1.48$ mm posteriorly (P<0.05) and $1.06{\pm}1.29$ mm inferiorly (P<0.05). The ratios of horizontal soft tissue movement to the hard tissue were 1:0.47 for the A point and A' point, and 1:0.74 for the U1 tip and UL. Vertically, the movement ratio between the A point and A' point was 1:0.38, between U1 tip and UL was 1:0.83, and between U1 tip and StmS was 1:0.79. Conclusion: Posterosuperior rotational movement of the maxilla in Le Fort I osteotomy results in posterior and inferior movement of UL. In addition, nasolabial angle was increased. Nasal tip and base of the nose showed a tendency to move downward and showed significant horizontal movement. The soft tissue changes in the upper lip and nasal area are believed to be induced by posterior movement at the UL area.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권4호
• /
• pp.154-160
• /
• 2014

Purpose: The efficiency of an anchor plate placed during orthognathic surgery via minimal presurgical orthodontic treatment was evaluated by analyzing the mandibular relapse rate and dental changes. Methods: The subjects included nine patients with Class III malocclusion who had bilateral sagittal split osteotomy at the Division of Oral and Maxillofacial Surgery, Department of Dentistry in Ajou University Hospital, after minimal presurgical orthodontic treatment. During orthognathic surgery, anchor plates were placed at both maxillary buttresses. The anchor plates were used to move maxillary teeth backward and for maximum anchorage of Class III elastics to minimize mandibular relapse during the postoperative orthodontic treatment. The lateral cephalometric X-ray was taken preoperatively (T0), postoperatively (T1), and one year after the surgery (T2). Seven measurements (distance from Pogonion to line Nasion-Nasion perpendicular [Pog-N Per.], angle of line B point-Nasion and Nasion-Sella [SNB], angle of line maxilla 1 root-maxilla 1 crown and Nasion-Sella [U1 to SN], distance from maxilla 1 crown to line A point-Nasion [U1 to NA], overbite, overjet, and interincisal angle) were taken. Measurements at T0 to T1 and T1 to T2 were compared and differences tested by standard statistical methods. Results: The mean skeletal change was posterior movement by $13.87{\pm}4.95mm$ based on pogonion from T0 to T1, and anterior movement by $1.54{\pm}2.18mm$ from T1 to T2, showing relapse of about 10.2%. There were significant changes from T0 to T1 for both Pog-N Per. and SNB (P<0.05). However, there were no statistically significant changes from T1 to T2 for both Pog-N Per. and SNB. U1 to NA that represents the anterior-posterior changes of maxillary incisor did not differ from T0 to T1, yet there was a significant change from T1 to T2 (P<0.05). Conclusion: This study found that the anchor plate minimizes mandibular relapse and moves the maxillary teeth backward during the postoperative orthodontic treatment. Thus, we conclude that the anchor plate is clinically very useful.

• 대한소아치과학회지
• /
• 제32권2호
• /
• pp.270-277
• /
• 2005

본 연구의 목적은 혼합치열기(Hellman dental age III A)의 II급1류 부정교합과 정상교합 어린이간에 구개용적 및 전방구개경사의 차이가 있는지 알아보기 위하여 3차원 레이저 스캐너를 이용하여 비교, 분석하는 것이었다. 대상은 서울대학교 치과병원에 내원한 골격성 II급1류 부정교합 환자 중 혼합치열기 어린이 31명과 서울시 치과의사회에서 주관한 2000년부터 2004년까지의 건치어린이 선발대회 후보 중 교합양상이 정상이며 안모상 정상범주에 속하는 29명이었으며, 기준에 적합한 60개의 상악모형을 3차원 레이저 스캐너(Breuckmann opto-TOP HE, INUS, Korea)로 스캔한 후 Rapidform 2004 프로그램 (INUS, Korea)을 이용하여 3차원 이미지를 재구성하고 구개용적과 시상분할면 상에서의 전방구개경사를 측정하였다. 얻어진 결과를 95% 신뢰수준에서 independent samples t-test를 이용하여 통계적 유의성을 검정하여 다음과 같은 결과를 얻었다. 1. 혼합치열기의 II급1류 부정교합 어린이는 정상교합 어린이에 비해 평균구개용적이 유의하게 작은 경향을 보였다(p<0.05). 2. 혼합치열기의 II급1류 부정교합과 정상교합 어린이 사이에서 전방구개경사와 구개고경은 유의성 있는 차이를 보이지 않았다(p>0.05). 3. 혼합치열기의 II급1류 부정교합 어린이는 정상교합 어린이에 비해 구개장경이 유의하게 길었다(p<0.01). 4. 혼합치열기의 II급1류 부정교합 어린이는 정상교합 어린이에 비해 견치간 구개폭경(p<0.05)과 대구치간 구개폭경(p<0.01)이 유의하게 좁은 경향을 보였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권6호
• /
• pp.628-634
• /
• 2008

The purpose of this study is to examine reproducibility of operation plan and 3-dimentional jaw movement patterns by comparing jaw position of STO with post-operative jaw position. Twenty patients with class III dental and skeletal malocclusion who were treated with Le-Fort I osteotomy and B-SSRO were reviewed. Lateral cephalometric radiographs were taken within two weeks before operation and two days after operation. Cephalometric radiographs were compared and analyzed with orthognathic computer program '$V-Ceph^{TM}$'. Post-operative maxillary advancement was insufficient compared to maxillary advancement through STO. Post-operative setback movement was over compared to mandibular setback movement through STO. But statistically this is not significant. Maxillary vertical location is insignificant on the whole. Especially post-operative maxillary clockwise rotation is significant compared to maxillary rotation through STO. Post-operative maxillary clockwise rotation tendency is generally observed in all patients. So surgeons and staffs must consider this tendency when operation plan is established ans operation is being performed. Using intra or extra oral marking points, face bow, and bite plate will make exact surgery possible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권4호
• /
• pp.334-345
• /
• 2005

The purpose of this study was to compare the postoperative stability and relapse according to 2 different fixation methods after bilateral sagittal split ramus osteotomies in mandibular prognathic patients. Tweenty one patients with Class III dental and skeletal malocclusion who were treated with bilateral sagittal split ramus osteotomy were selected for this retrospective study. We classfied the patients into two groups according to the fixation methods of bony segments after osteotomies. Group W (n = 10) had the bone segments fixed with nonrigid wire and Group S (n = 11) had bicortical screws inserted in the gonial area through a transcutaneous approach. Cephalometric radiographs were taken preoperatively, immediate postoperatively and more than six months postoperatively in each patient. After tracing the cephalometric radiographs, various parameters were measured. Before surgery, both groups were balanced with respect to linear and angular measurements of craniofacial morphology. Mean posterior sagittal setback amounts of the mandibular symphysis was 8.6 mm in the wire group and 6.79 mm in the rigid group, Six months postoperatively, the wire group had 33.1% relapse of the mandibular symphysis and 22.8% in the rigid group relapse. Both groups experienced changes in the orientation and configuration of the mandible. It is thought that Rigid screw fixation is a more stable method than nonrigid wire fixation for maintaining mandibular setback after sagittal split ramus osteotomy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권2호
• /
• pp.167-173
• /
• 2007

측두근막은 비변형의 교정에 다양하게 이용될 수 있으며, 융비술에 단일 또는 복합 이식재로 사용될 수 있다. 측두근막 이식은 공여부가 눈에 띄지 않을 뿐만 아니라 코를 적절히 피개하고 외형을 좋게 하며 크기를 증대시켜 준다. 한편 비근부의 증대를 통해 코를 높이는 것은 물론 길이를 길게 할 수 있으며 넓은 내안각 사이의 외형을 개선해 줄 수 있다. 우리는 하악전돌증을 주소로 악교정수술을 받기 위해 내원한 2예의 남자 환자에서 계획된 악교정수술과 더불어 함몰된 비근부에 대하여 측두근막을 이용한 비근증대술을 시행하였다. 수술 후 치열안면변형의 해소는 물론 더욱 부드럽고 자연스럽게 개선된 안모를 관찰할 수 있었다. 환자의 측모도 더욱 개선되어 비근부가 높아졌을 뿐만 아니라 코의 길이가 길어진 효과도 얻을 수 있었다. 수술 후 비근부에서 주목할 만한 흡수 또는 변위 소견은 관찰되지 않았다. 함몰된 비근부에 대한 측두근막 이식을 이용한 비근증대술은 술식이 간단하면서도 비근부가 증대되고 코의 길이가 증가되는 적절한 수술방법임을 알 수 있었다.

• 대한치과교정학회지
• /
• 제21권1호
• /
• pp.17-29
• /
• 1991

The purpose of this study was to provide quantitative data describing the effect of rapid palatal expansion (RPE) on nasal airway resistance (NAR). RPE is an orthopedic procedure which is commonly used to widen the maxilla in skeletal Class III patients. 18 subjects (9 males and 9 females, mean age: 10 years 7 months) were selected from the Orthodontics in Yongdong Severance Hospital. Recordings of NAR were taken by active anterior method prior to expansion, immediately after desired maximum expansion, and after approximately 3 months and 6 months, and 1 year. All data was recorded and statistically processed with the SPSS program of IBM PC system. The results are as followings . 1. The average initial NAR of the subjects was 3.84 cm $H_2O/LPS\;(SD{\pm}1.34)$. It was greater than the average NAR of the normal subjects. 2. Among 18 subjects, 9 subjects showed reduction of NAR and 9 subjects showed no specific change of NAR after expansion. 3 An average reduction in NAR after immediately expansion was statistically significant at the 0.05 level. 4. The reduction appeared stable throughout the post treatment observation period of 1 year after expansion. From these results, it was suggested that RPE is a useful method to reduce NAR.

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.293-303
• /
• 2020

Objective: To investigate the three-dimensional (3D) surgical accuracy between virtually planned and actual surgical movements (SM) of the maxilla in two-jaw orthognathic surgery. Methods: The sample consisted of 15 skeletal Class III patients who underwent two-jaw orthognathic surgery performed by a single surgeon using a virtual surgical simulation (VSS) software. The 3D cone-beam computed tomography (CBCT) images were obtained before (T0) and after surgery (T1). After merging the dental cast image onto the T0 CBCT image, VSS was performed. SM were classified into midline correction (anterior and posterior), advancement, setback, anterior elongation, and impaction (total and posterior). The landmarks were the midpoint between the central incisors, the mesiobuccal cusp tip (MBCT) of both first molars, and the midpoint of the two MBCTs. The amount and direction of SM by VSS and actual surgery were measured using 3D coordinates of the landmarks. Discrepancies less than 1 mm between VSS and T1 landmarks indicated a precise outcome. The surgical achievement percentage (SAP, [amount of movement in actual surgery/amount of movement in VSS] × 100) (%) and precision percentage (PP, [number of patients with precise outcome/number of total patients] × 100) (%) were compared among SM types using Fisher's exact and Kruskal-Wallis tests. Results: Overall mean discrepancy between VSS and actual surgery, SAP, and PP were 0.13 mm, 89.9%, and 68.3%, respectively. There was no significant difference in the SAP and PP values among the seven SM types (all p > 0.05). Conclusions: VSS could be considered as an effective tool for increasing surgical accuracy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제41권5호
• /
• pp.224-231
• /
• 2015

Objectives: The purpose of this study was to evaluate changes in the pharyngeal airway space and hyoid bone position after mandibular setback surgery with bilateral sagittal split ramus osteotomy (BSSRO) and to analyze the correlation between the amount of mandibular setback and the amount of change in pharyngeal airway space or hyoid bone position. Materials and Methods: From January 2010 to February 2013, a total of 30 patients who were diagnosed with skeletal class III malocclusion and underwent the same surgery (BSSRO) and fixation method in the Division of Oral and Maxillofacial Surgery, Department of Dentistry at the Ajou University School of Medicine (Suwon, Korea) were included in this study. Lateral cephalograms of the 30 patients were assessed preoperatively (T1), immediately postoperatively (T2), and 6 months postoperatively (T3) to investigate the significance of changes by time and the correlation between the amount of mandibular setback and the amount of change in the airway space and hyoid bone position. Results: Three regions of the nasopharynx, oropharynx, and hypopharynx were measured and only the oropharynx showed a statistically significant decrease (P<0.01). A significant posterior and inferior displacement of the hyoid bone was found 6 months after surgery (P<0.01). Analysis of the correlation between the amount of mandibular setback and the amount of final change in the airway space and hyoid bone position with Pearson's correlation showed no significant correlation. Conclusion: In this study, the oropharynx significantly decreased after mandibular setback surgery, and changes in the surrounding structures were identified through posteroinferior movement of the hyoid bone during long-term follow-up. Therefore, postoperative obstructive sleep apnea should be considered in patients who plan to undergo mandibular setback surgery, and necessary modifications to the treatment plan should also be considered.

• Journal of Yeungnam Medical Science
• /
• 제25권2호
• /
• pp.108-116
• /
• 2008

Background : When surgeons plan mandible ortho surgery for patients with skeletal class III facial asymmetry, they must be consider the exact method of surgery for correction of the facial asymmetry. Three-dimensional (3D) CT imaging is efficient in depicting specific structures in the craniofacial area. It reproduces actual measurements by minimizing errors from patient movement and allows for image magnification. Due to the rapid development of digital image technology and the expansion of treatment range, rapid progress has been made in the study of three-dimensional facial skeleton analysis. The purpose of this study was to conduct 3D CT image comparisons of mandible changes after mandibular surgery in facial asymmetry patients. Materials & methods : This study included 7 patients who underwent 3D CT before and after correction of facial asymmetry in the oral and maxillofacial surgery department of Yeungnam University Hospital between August 2002 and November 2005. Patients included 2 males and 5 females, with ages ranging from 16 years to 30 years (average 21.4 years). Frontal CT images were obtained before and after surgery, and changes in mandible angle and length were measured. Results : When we compared the measurements obtained before and after mandibular surgery in facial asymmetry patients, correction of facial asymmetry was identified on the "after" images. The mean difference between the right and left mandibular angles before mandibular surgery was $7^{\circ}$, whereas after mandibular surgery it was $1.5^{\circ}$. The right and left mandibular length ratios subtracted from 1 was 0.114 before mandibular surgery, while it was 0.036 after mandibular surgery. The differences were analyzed using the nonparametric test and the Wilcoxon signed ranks test (p<0.05). Conclusion: The system that has been developed produces an accurate three-dimensional representation of the skull, upon which individualized surgery of the skull and jaws is easily performed. The system also permits accurate measurement and monitoring of postsurgical changes to the face and jaws through reproducible and noninvasive means.