• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.581-589
• /
• 1998

In order to correct a maxillofacial-skeletal disharmony successfully and achieve a favorable facial profile, orthodontic treatment must begin at pubertal growth spurt. Therefore predicting the pubertal growth pattern and evaluating the growth potential is very important. For an orthodontist, estimating skeletal maturity in relation to one's personal growth spurt is essential and it must be considered into the treatment. The objective of this study was to find out whether there was a difference in menacheal age among different malocclusion groups and to evaluate the skeletal maturity at menarche. The subjects were 64 Class I malocclusion patients, 51 Class II patients and 38 Class III patients. Skeletal maturity was estimated from handwrist radiographs of these patients. Handwrist radiographs were taken between 3 months before and after the menarche. The results were as follows. 1. The mean chronologic age of menarche was $12.50{\pm}1.01$ years. 2. For the Class I malocclusion group the mean age of menarche was $12.36{\pm}1.04$ years, for Class II $12.81{\pm}1.03$ years and for Class III $12.32{\pm}0.82$ years. According to these results Class II malocclusion patients started mensturation later than Class I and Class III malocclusion patients. 3. No difference was found considering the skeletal maturity at menarche among the malocclusion groups. 4. The skeletal maturity index at menarche was SMI 7 for $45.10\%$, SMI 8 for $27.25\%$, SMI 9 for $10.46\%$, SMI 6 for $7.84\%$, SMI 10 for $7.84\%$ and SMI 5 for $1.31\%$ patients. 5. Statistically there was a significant correlation between skeletal maturity estimated by handwrist radiographs and menacheal age(p<0.05, r=0.25430).

• The korean journal of orthodontics
• /
• v.49 no.6
• /
• pp.360-371
• /
• 2019

Objective: We sought to determine the predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion (MARPE) in young adults. Methods: The following variables were selected as possible predictors: chronological age, palate length and depth, midpalatal suture maturation (MPSM) stage, midpalatal suture density (MPSD) ratio, the sella-nasion (SN)-mandibular plane (MP) angle as an indicator of the vertical skeletal pattern, and the point A-nasion-point B (ANB) angle for anteroposterior skeletal classification. For 31 patients (mean age, 22.52 years) who underwent MARPE treatment, palate length and depth, MPSM stage and MPSD ratio from the initial cone-beam computed tomography images, and the SN-MP angle and ANB angle from lateral cephalograms were assessed. The midpalatal suture opening ratio was calculated from the midpalatal suture opening width measured in periapical radiographs and the MARPE screw expansion. Statistical analyses of correlations were performed for the entire patient group of 31 subjects and subgroups categorized by sex, vertical skeletal pattern, and anteroposterior skeletal classification. Results: In the entire patient group, the midpalatal suture opening ratio showed statistically significant negative correlations with age, palate length, and MPSM stage (r = -0.506, -0.494, and -0.746, respectively, all p < 0.01). In subgroup analyses, a strong negative correlation was observed with the palate depth in the skeletal Class II subgroup (r = -0.900, p < 0.05). Conclusions: The findings of this study indicated that age, palate length, and MPSM stage can be predictors of midpalatal suture expansion by MARPE in young adults.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.219-232
• /
• 1996

The purpose of this study was to evaluate treatment effects of bionator in Class II division 1 malocclusion by FEM(Finite Element Method). The 73 subjects were classified into good result group and poor result group in reference to posttreatment molar relation, posttreatment overbite and overjet, posttreatment profile, and relapse. Pretreatment and posttreatment lateral cephalograms were taken and FEM was performed. The results were as follow; 1. There was no statistical significance in treatment changes between the sexes, and between the treatment result groups. 2. Treatment changes were not significantly different among the age groups. 3. The effect of treatment period groups on skeletal and dentoalveolar changes were analyzed using ANOVA. Body of maxilla, upper incisor, anterior face, ramus, upper anterior face, lower anterior face and treatment effect were correlated with the treatment period, but correlation coefficients were low. 4. The results of present investigation confirm that Class II bionator can assist in the correction of Class II division 1 malocclusion, mainly due to dentoalveolar changes. 5. There is significant difference in skeletal and dentoalveolar pattern between good result group and poor result group. In poor result group, maxilla was relatively downward and backward rotated, mandible was relatively backward rotated, upper incisor was in relatively lingual position, lower incisor was in relatively labial position.

• Journal of Oral Medicine and Pain
• /
• v.33 no.2
• /
• pp.121-132
• /
• 2008

To establish the diagnosis and treatment plan for skeletal Class II malocclusion, patient's skeletal morphology, prognosis as well as the treatment effect is one of the important factor to consider. Therefore, the present study classified analyzed the difference between initial(T1) and after use of activator(T2), and after finish of direct multi-bonding system treatment(T3) for Class II malocclusion during growth period according to the treatment result(effective body length) and morphology of vertical skeletal type. The experimental group was classified into two groups(1 group, 2 group) according to the effective body length change between before and after use of activator, showed good treatment effect of activator for patient with small mandible and large differential between maxilla and mandible, and short anterior facial height. And the difference between 1 and 2 group in the experimental group before treatment(T1) disappeared in the finished treatment(T3). But in contrast, the initial difference of T1 stage between a and b group in the control group did not disappear in the finished treatment(T3). In short, experimental group's treatment effect was much better than contrast group and the treatment effect was maintained and got stable results at comparison experimental group with contrast group. Through this study, we can find activator's treatment effect and stable retention of that in growing Class II malocclusion patients. By estimate of activator treatment effect through these results, we can establish the correct diagnosis and treatment plan for adolescent Class II malocclusion estimate of activator treatment effect and lead the ideal facial growth pattern.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.329-339
• /
• 2022

The purpose of this study was to compare the palatal dimensions (volume, width, length, and height) in different malocclusions (Class I, II, and III) in mixed dentition using a three-dimensional digital scanner. The study was performed on 30 selected casts from 1400 casts that were taken at the Department of Pediatric Dentistry at Dankook University. Casts consisted of Class I, II, and III malocclusion groups in Hellman's dental age IIIA. The mean age was 8 years and 6 months ± 11 months. Each cast was scanned by three-dimensional digital scanner, Medit T710 (Medit, Seoul, Korea), and shaped into the three-dimensional image and calculated palatal dimensions using the Plan T program (SMD solution, Seoul, Korea). The values were statistically compared and evaluated by Kruskal-Wallis followed by the Mann-Whitney test. According to our results, subjects with Class II malocclusion showed lower palatal width and longer palatal length compared to those with Class I and Class III. For palatal height, Class III malocclusion subjects in mixed dentition exhibited a larger number than Class II and Class I. Lastly, for palatal volume, compared to other malocclusions, Class III showed higher results; however, there were no significant differences. The form of the palate differs in types of malocclusions and understanding of these differences is important in clinical significance. Based on this study, the understanding of the relationship between the shape of the palate and the skeletal pattern provides useful information about orthodontic treatment plans, early diagnosis of malocclusion, and morphological integration mechanisms. Orthopedic treatment in the maxilla should be performed during early and intermediate mixed dentition to enhance treatment efficiency.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.93-104
• /
• 2000

Orthodontic treatment in conjunction with second-molar extraction has been a controversial issue among orthodontists over many decades. The aim of this study was to investigate the treatment effects of upper second molar extraction cases. The sample included 19 upper second molar extraction orthodontic cases(ten Angle's Class I's and nine Class II's, average age=13Y 6M) cared at Kyung-Hee University Department of Orthodontics. Lateral cephalometric radiographs were taken before and immediately after treatment. Seventy-nine points were digitized on each cephalogram and 38 cephalometric parameters were computed comprising 22 angular measurements, 13 linear measurements, and 3 facial proportions. The data obtained from each malocclusion group were analyzed by paired t-test. The statistical results disclosed that there was no significant change in skeletal pattern after treatment except for that accountable by growth while there was statistically significant change in dentoalveolar and soft tissue patterns. There were no significant changes in Bjork sum, posterior facial height /anterior facial height and lower anterior facial height /anterior facial height. No significant changes in anteroposterior position of maxilla and palatal plane were manifested. Although facial axis and lower facial height was slightly increased and the mandible was rotated backward and downward, there was no remarkable change in the mandibular plane. There were statistically significant changes in distal movement of upper first molar, molar key correction and overjet reduction while there was no change in the occlusal plane. The upper lip was slightly retracted simultaneously with slight increase in nasolabial angle. These results signify that distalization of upper dentition with the second molar extraction does change occlusal relationship without gross modifications in the craniofacial skeletal configurationson. Henceforth the second molar extracted would be recommended to treat severe anterior crowding and protrusion with minor skeletal discrepancy.

• Imaging Science in Dentistry
• /
• v.44 no.1
• /
• pp.61-65
• /
• 2014

Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the ${\beta}$ angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean ${\beta}$ angle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, ${\beta}$ angle showed no significant difference in different types of facial growth.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.473-479
• /
• 1997

This author tried to find if the size of the frontal sinus can be used as a diagnostic aid to predict the manldibular growth pattern in growing Patients in lateral cephalogram utilizing the fact the the frontal sinus completes its growth in earlier stage but the mandible continues to grow until later. At this study, the 228 samples were divided into 3 groups as skeletal Class I, II, III malocclusions and three indicies(ANB, APDI, Wits) were measured which indicate the mandibular body length and the antero-posterior relationship of maxilla and mandible to evaluate their relations with frontal sinus. And results were obtained as followings 1. The size of frontal sinus is highly related to ANB, APDI, Wits and mandilar body length.(p<0.001) 2. the size of the frontal sinus of the Cl III malocclusion group was on the lateral cephalogram larger than Cl I and Cl II group.

• The korean journal of orthodontics
• /
• v.53 no.4
• /
• pp.276-285
• /
• 2023

Objective: The aim of this retrospective study was to compare changes in hard tissue and soft tissue after the four first premolars were extracted with anterior teeth retraction according to the presence or absence of lip incompetence. Methods: Patients who underwent the four first premolars were extracted with anterior teeth retraction were divided into competent (n = 20) and incompetent lip (n = 20) groups. Cephalometric measurements for hard tissue and soft tissue changes were performed pre-treatment and post-treatment. Results: In the competent group, the upper and lower lips retreated by 2.88 mm and 4.28 mm, respectively, and in the incompetent group by 4.13 mm and 5.57 mm, respectively; the differences between the two groups were significant (p < 0.05). A strong positive correlation between retraction of the upper lip and upper incisors was observed in both groups (p < 0.05), whereas a correlation between retraction of the lower lip and lower incisors was only found in the incompetent group. A simple linear regression analysis showed that the pattern of lip retraction following the retraction of the anterior teeth was more predictable in the incompetent group than in the competent group. Conclusions: These findings suggest that the initial evaluation of lip incompetence in patients with skeletal Class II is essential for the accurate prediction of the soft tissue changes following retraction of the anterior teeth in premolar extraction treatment. Therefore, sufficient explanation should be provided during patient consultations.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.577-585
• /
• 1995

This study has been performed to determine whether significant differences in the maxillary basal bone pattern exist between skeletal class II malocclusion and normal occlusion. Materials for the skeletal Class III sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 29 adult individuals, 15 males and 14 females. The average age was 19.75 years with a range from 16.4 to 29.1 years. A normal control sample consisted of lateral cephalometric roentgenograms and maxillary cast models of 24 adult individuals, 13 males and 11 females. The average age was 24.25 years with a range from 20.8 to 29.4 years. The results of this study can be summarized and concluded as like follows. 1. In comparing sexual difference of maxillary basal bone morphology in skeletal Class III malocclusion, the following Parameters of males were found to be significally larger than those of females : inter first premolar width, inter molar width, oblique canine height, oblique molar height and maxillary basal bone perimeter. 2. In comparing sexual difference of maxillary basal bone morphology in normal occlusion, the following parameters of males were found to be significally larger than those of females : inter canine width, inter first and second premolar width, inter molar width, oblique canine height and oblique molar height. 3. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion md normal occlusion in males, the following parameters were found to be significally larger in normal occlusion : inter canine width, inter canine height, inter molar height, oblique canine height and oblique molar height. 4. In comparing maxillary basal bone morphologic difference between skeletal Class III malocclusion and normal occlusion in females, the following parameters were found to be significally larger in normal occlusion : inter canine height, inter molar height, oblique canine height, oblique molar height and maxillary basal bone perimeter.