• 펄프종이기술
• /
• 제37권1호
• /
• pp.73-81
• /
• 2005

Stockigt sizing test, which is readily affected by individual tester's bias as well as testing conditions in recognizing red coloration, had to be modified to improve its reliability and reproducibility. The novel testing system with the automatic recognizing program of red coloration was developed with the auxiliary equipments including an automatic liquid dispenser and a specimen shifter. The analysis program used a hue value of a droplet image in recognizing a point of time on red coloration instead of RGB values that are not similar to human perception of color. Hue was more sensitive in recognizing the red coloration of a droplet than the other two factors, Saturation and Value. During the test, the program records the time consumed up to a specific hue value of a droplet on a specimen. Differently from the conventional test, the automatic test could obtain a reliable and reproducible sizing degree with a minor error. Furthermore, the Stockigt sizing degree measured by the automatic system showed great correlations with contact angle and Hercules sizing degree. It means that such great correlations will contribute to the development of an integrated measuring system capable of predicting contact angle, surface tension, surface energy and Hercules sizing degree of paper and paperboards through the Stbckigt sizing test. It was meaningful to note that the automatic system for Stbckigt sizing test might be able to used to predict contact angle, Hercules and Cobb sizing degree, based upon the high correlation coefficients.

• 한국항공운항학회:학술대회논문집
• /
• 한국항공운항학회 2016년도 춘계학술대회
• /
• pp.9-13
• /
• 2016

Reaction drive rotor system is capable of providing hover and low speed capabilities to different aircraft concepts such as stopped rotor wing, canard rotor wing, compound gyroplane etc. Existing sizing and analysis tools for shaft drive rotor system cannot be applied directly to this system. The available methodologies to size this system were reviewed. Power available calculation procedure and factors affects it were addressed prior to sizing process. Various design issues of this system due to interrelationship of internal gas flow dynamics and rotor external aerodynamics was discussed. Finally, a modification that is required in existing sizing methodologies was identified and combined approach in sizing process to consider the interrelationship among engine, rotor and blade duct was introduced.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2004년도 춘계학술대회
• /
• pp.355-367
• /
• 2004

Interest about information infrastructure construction is decayed socially according to arrival of information age, and various information systems is constructed for efficient business processing, customer service improvement in public sector. According to subjective method of performance improvement for information system of public sector and engine that propel information system construction bemuse it is no definite hardware sizing guidelines for introduction or system caterer, is calculating resources scale of information system. Is situation that problem of excess of scale or reduction sizing is happening, and is causing various kinds problem that is waste of information budget and service decline thereby. So, We proposed hardware sizing framework for information system that is applied to information programs.

• 한국의류학회지
• /
• 제33권5호
• /
• pp.827-839
• /
• 2009

Sizing system of Korean structural firefighting protective clothing that is national approved should be met for specification of structural firefighting protective clothing that is identified by Ministry of Public Administration and Security(MOPAS). However if you look over the specification of sizing system, the standard is based on only 'height' and the others are indicated as the size of completed product. KS K ISO 13688 and EN 340 which is met on ISO 13688 which indicates sizing system about protective clothing has the standards of height, chest and waist circumference. Also NFPA 1971 that has standards of sizing system is based on chest circumference, cervical to wrist length, waist circumference and inseam. That is different from Korean standards. Therefore, fire fighting protective clothing standards which is based on only height should be compensated and not be relied on foreign standards like ISO. It is indispensable for developing our own sizing system of structural fire fighting protective clothing. In this studying, Korean new sizing system of structural fire fighting protective clothing was developed for providing basic information of ergonomic structural fire fighting protective clothing. The analyzed target age was between 20 and 59 years old fire fighter who extinguish the fire. And it was analyzed by 3D measurement among data of the $5^{th}$ Size Korea. On conclusion, in case of structural fire fighting protective clothing coat, physical dimension was to be chest circumference, cervical to wrist length. Three dimensions as 5cm space of circumference and four dimensions as 2.5cm space of cervical to wrist length were derived, which means that totally 12 dimensions were defined. Dimension standards of pants was based on the analysis of waist circumference and crotch height. Six dimensions as 5cm space of waist circumference and three dimensions as 5cm space of crotch height were derived, which means that totally 14 dimensions were defined.

• 복식문화연구
• /
• 제30권4호
• /
• pp.495-512
• /
• 2022

This study aims to design a new sizing system for hygienic masks to protect against COVID-19-related respiratory disorders. The product sizes were collected from 70 commercially available hygienic masks, and 18 head measurements were obtained from the three-dimensional (3D) scan data of 2,048 men and women aged 20 to 69 years from the 6th Size Korea Survey. The statistical analysis was performed using the IBM Statistical Package for the Social Sciences (SPSS) 28.0 program. The "bitragion-subnasale arc" and "menton-sellion length" were chosen as the key body dimensions for the hygienic mask sizing system. The linear regressions with 18 3D head measurements were analyzed, and it was determined that the key body dimensions were useful for statistically predicting other 3D head measurements related to hygienic masks. A new sizing system was proposed for two types of masks, "masks with a tight fit" and "masks with a loose fit," taking into account the existing Korean Industrial Standards (KS) and the shortcomings of the sizes of hygienic masks on the market. The sizing system for tight-fitting masks consisted of the key body dimensions, with their sizes indicated by a pair of numbers. The sizing system for loose-fitting masks consisted solely of the bitragion-subnasale arc, with their sizes denoted by letters such as S, M, and L (denoting small, medium, and large, respectively). Future studies should consider this mask sizing system for different age groups, such as children and adolescents.

• 한국의류학회지
• /
• 제22권7호
• /
• pp.862-871
• /
• 1998

In this study, the effect of sizing on the physical and mechanical characteristics of Hansan ramie was studied. 2 kinds of Hansan ramie were used for this study and one kind of the chinese ramie was also used for comparing with the characteristics of Hansan ramies. The following results were obtained from this experimental study. The wrinkle recovery angle was gradually reduced according to the increasing of the concentration of sizing agent. As the size agent could easily penetrate between the thick yarms, the effect of sizing on the wrinkle recovery angle was evident on the Chinese and Hansan coarse ramie. The result of KES-F system showed that the sizing affected much on the bending properties and shear properties. As the size concentration was increased the shear properties were increased more evidently on the Chinese and Hansan coarse ramie. The result of KES-F system showed that the sizing affected much on the bending properties and shear properties. As the size concentration was increased the shear properties were increased more evidently than the bending properties. The other mechanical properties didn't changed much by sizing. The calculated primary hand value also showed that the ramie became more stiff after sizing.

• 한국IT서비스학회지
• /
• 제5권1호
• /
• pp.47-59
• /
• 2006

According to the policy for "e-Korea construction" of Korean government, Investment of information system during the past decade are dramatically increasing. More than a half of this investment is cost of hardware infrastructure. So, accurate hardware sizing are essential for higher efficiency of investment. Accurate hardware sizing benefits are generally viewed in terms of the avoidance of excess equipment and lost opportunity costs by not being able to support business needs. Unfortunately, however, little research effort to make the hardware sizing methodology are doing. We propose a sizing method for information system in public sector. This method is determinate empirical study that are gathering and analyzing cases, making method and reviewing expert. Finally we are proposed calculating method for hardware components that is CPU, memory, internal and external disk according to the application system type which is OLTP, Web, WAS. Our study certainly will act as a catalyst for higher investment-efficiency of the future information programs in public sector.

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.81-90
• /
• 1998

This study was performed to devise a sizing system for child hospital gown(uniform). The researchers surveyed the usage of child hospital gown and developed a sizing system for the child hospital gown. The suitability of revised size specification of gown was evaluated. 219 child inpatients participated in the survey and 13 child inpatients took part in the wear test. The results of the study were as following. 1) 71.7% of the subjects wore the uniform shirts. however numerous number of subjects did not wear uniform pants that the hospital provided(52.5%). The 68.2% of children who were shorter than 100cm did not wear uniform pants. 2) The most significant reason not wearing the hospital gown was unsuitable sizing system (42.1%). Inconvenience for donning and doffing comes next(26.2%). 3) The least satisfied garment size problems were the pants length and sleeve length. 4) The researchers developed a sizing system for the child hospital gown. The system provides 4 different sizes for children age from 2 months to 12 years. One-piece dress style was suggested for the smallest size(XS). The larger sizes(S. M. L) were designed in pajama style. 5) The sizing system developed in this study was moderately satisfied by the users.

• 한국의류학회지
• /
• 제28권1호
• /
• pp.119-130
• /
• 2004

The objective of this study was to develop a school uniform sizing system with high coverage rate for middle school boys, who are in the stage of rapid growth, by identifying problems in existing school uniform sizing systems through surveys of students and uniform manufacturing companies, and analyzing juveniles' physical sizes. For this purpose. the study conducted a survey about how middle school boys choose their uniform sizes, and what complaints they have on the size of the uniforms. In addition, it was investigated what is the current state of uniform manufacturing and sizing systems through a survey of uniform companies, and the study identified problems in the size of school uniforms by comparing physical sizes of juveniles' aged 14 to 16 with the sizing systems of the companies and KS standards in 1997. Juveniles' physical data was a part of the material of the national anthropometric data in 1997. Using the two-way distribution of juveniles' height-bust girth and height-waist girth, this study established the sizing system by increasing the number of sizes for the short interval where juveniles' physical sizes are densely distributed whereas limiting the number of sizes for the long interval where juveniles' physical sizes are rarely distributed, considering the difference between companies' standard and KS' standard.

• 한국콘텐츠학회논문지
• /
• 제13권5호
• /
• pp.451-458
• /
• 2013

본 논문에서는 전문가용 Bike를 위한 sizing 및 fitting 시스템을 구현한다. 수동으로 신체의 사이즈를 측정하여 그에 맞는 프레임을 선정하여 산악용 바이크를 제작함으로써 많은 시간이 걸린다. 이 비해 신체의 조건을 자동측정하고 자전거의 프레임과 여러 가지 부품을 세팅함으로써 시간절약은 물론 무리한 운동으로 오는 질병을 예방할 수 있다. 본 연구는 신체의 자동측정을 위하여 크로마키 기법을 이용한 피사체의 아바타 영상정보 추출을 통하여 사이징(sizing)과 피팅(fitting)을 실시하는 알고리즘을 제시한다. 이때 사용자는 정보를 손쉽게 취득할 수 있고, 필요에 따라 그 정보를 활용함으로써 사용자는 고객관리 뿐만 아니라 보다 신속하고 정확한 데이터 관리에 충실함으로써 시간절약은 물론 서비스를 원활히 할 수 있다.