• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.360-366
• /
• 2009

The purpose of this research was to study of the lower body obesity control with female university students, particularly has been done meridian message and aroma therapy, The data included in the remainder of this research was gathered from the experimental groups consisted of eighteen female students for tested group and compared group over 8 weeks. By the observation of tested group and compared group, we could see the measurement of thigh and calf sizing down overall, but they still show some differences depend on physical constitutions of each members who has been tested. This meant that the result could be changed by the will and persistent endurance of experimented ones Both of tested group and compared group's body mass index shrinked but still there were some exceptions, this result showed the difference of each participants' willingness as well as the age gap. We could find the reduction of Total Cholesterol, LDL, neutral fat and blood sugar in both tested group and compared group. However in case of HDL the measurement increased which means wrong method of controlling obesity can show some abnormal figures

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.376-384
• /
• 2014

This study investigated the effect of nanocellulose, such as microfibrillated cellulose (MFC) and cellulose nanocrystal (CNC), and aminated starch on tensile property and thermal stability of plasticized starch film. Glycerol (23 wt%) was used as a plasticizer and nanocelluloses of 1-30 parts per hundred parts of resin (phr) in the basis of plasticized starch were added. Tensile strength and elastic modulus increased with increasing nanocellulose addition amount, whereas elongation at break decreased. Tensile properties of MFC-reinforced starch film were higher than those of CNC-reinforced film. Optimum addition amount of aminated starch, which is commonly used for paper sizing, to improve tensile property of film, was found to be 5%. And 1% addition of aminated starch showed the best effect in the improvement of tensile property of the film. Thermal stability was improved with the addition of MFC to plasticized starch film with and without aminated starch.

• Journal of fish pathology
• /
• v.24 no.2
• /
• pp.161-166
• /
• 2011

The metacercariae of Clinostomum complanatum (Rudolphi, 1814) were isolated in the whole body muscle of wild freshwater fish, spotted barbel gudgeon (Squalidus multimaculatus Rosoya et Jeon) from the local river in Yeongdeok, Gyeongsangbuk-do, Korea. The infected fish with bumpy body surface by "yellow grub" showed erratic swimming behavior and some fish were died. The isolated excysted metacercariae were tongue shaped and 2.85~5.89 mm ${\times}$ 0.8~1.99 mm in size. 1~98 metacercariae were isolated in individual fish and mean infection intensity was 25. All examined adult spotted barbel gudgeon sizing 7 cm in body length were infected. This is the first report of disease outbreak and mortality caused by C. complanatum infection in wild freshwater fish in Korea.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.3
• /
• pp.254-259
• /
• 2004

Rapid detection of foodbome pathogens is becoming increasingly important. The requirement for faster, more reliable tests has lead to the development of a wide range of rapid methods. Among these methods, the use of systems based on nucleic acid based detection has been increasing since they offer advantages of reduction in test time and more reliable detection or identification. Random Amplification Polymorphic DNA(RAPD) method has been used to fingerprint foodbome microorganisms; Listeria monocytogenes. In this study, 10-mer primer OPG-13(5'-CTCTCCGCCA-3') was used to generate RAPD-PCR for detection of pathogenic L. monocytogenes of Listeria spp. Among 20 primers tested, OPG-13 showed on acceptable result for the differentiation of a pathogenic Listeria from non-pathogenic microorganisms. Pathogenic Listeria, L. monocytogenes(ATCC 15313, 19111, 19112, 19113) showed two bands for 700 bp and 1,500 bp while non-pathogenic bacteria, L. ivanovii, L. grayi, L. murrayi, L. innocua, L. welshimeri, and L. seeligeri had only one band sizing from 2,000 to 2,300 bp. This RAPD method proved to be a valuable to gain important information on sources of pathogenic bacteria in food industry.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.64-74
• /
• 1999

A new clock skew optimization for clock routing using link-edge insertion is proposed in this paper. It satisfies the given skew bound and prevent the total wire length from increasing. As the clock skew is the major constraint for high speed synchronous ICs, it must be minimized in order to obtain high performance. But clock skew minimization can increase total wire length, therefore clock routing is performed within the given skew bound which can not induce the malfunction. Clock routing under the specified skew bound can decrease total wire length Not only total wire length and delay time minimization algorithm using merging point relocation method but also clock skew reduction algorithm using link-edge insertion technique between two nodes whose delay difference is large is proposed. The proposed algorithm construct a new clock routing topology which is generalized graph model while previous methods uses only tree-structured routing topology. A new cost function is designed in order to select two nodes which constitute link-edge. Using this cost function, delay difference or clock skew is reduced by connecting two nodes whose delay difference is large and distance difference is short. Furthermore, routing topology construction and wire sizing algorithm is developed to reduce clock delay. The proposed algorithm is implemented in C programming language. From the experimental results, we can get the delay reduction under the given skew bound.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.1
• /
• pp.109-139
• /
• 2004

The first successful sustained powered flight by Wright Brothers was further extended to the rapid development of aviation technology, that led to transpacific flights, the invention of supersonic planes, and enabled hundreds of people to travel in the space, in addition to the fact that around 10 people had stepped on the moon, all of which were made possible within the very same century. However, on the back side of this most wondrous human technology, the vulnerableness to the aviation accident has been constantly accompanied with, right from the very beginning stage of the aircraft development. Moreover, the development of future aircraft is being focused on the aircraft performance, the increment of the number of passengers aboard and also its speed. In proportion to these phenomena of mega sizing the aircraft, the development of new technology and the increment of air traffic volume, the number of aviation accident is expected to augment, resulting in the enormous loss of human lives and properties. In order to prevent the disastrous aviation accident as such, it is essential to conduct the accident investigation in a specialized, systematic and scientific manner. In search for the method to attain the effective function of the aviation accident investigation organization, in this study, issues were examined as follows: The full-time Board Members and the establishment of an integrated investigation agency, The systematized security of status as an accident investigator, Inclusion of a human factors specialist in the investigator group organization, liability limit of an accident investigator Stipulation of the definition and the investigation scope of an accident and serious incident, along with the main body of conducting the investigation into the accident involving both civil and public aircraft, in the regulations related to the accident investigation.

• Journal of the Korean Society of Costume
• /
• v.62 no.8
• /
• pp.1-18
• /
• 2012

The purpose of the study was to offer in-depth understanding of the women's wear research trend in South Korea and thus to provide insights from the findings throughout the study to set appropriate directions for further development of women's wear related researches in the clothing and textile study area. The study considered research papers published by the 6 major apparel related journals listed on the KCI(Korea Citation Index) i.e. journals of the Korean Society of Clothing and Textiles(KSCT), the Korean Society of Costume(KSC), the Costume Culture Association (CCA), the Korean Society of Fashion Business(KSFB), the Korean Home Economics Association (KHEA) and the Korean Society for Clothing Industry(KSCI). A total of 380 research papers that were related with women's wear published from 2001 to 2010 were selected for the study and analyzed in the form of descriptive statistics using the SPSS Software ver. 18.0. The analysis was categorized according to the journals, years and research theme. The research themes were divided into various categories such as, clothing construction, textile science, fashion aesthetics and design, costume history and culture, apparel psychology and fashion marketing. The results derived from the research were: (1) the ratio of the research papers on the women's wear to the total papers published from 2001 to 2010 by the 6 subject journals was 380 to 6,815, i.e. 5.6% of the total papers; (2) journal of KSCT published the most women's wear research papers (N=149, 39.2%) and then the rest in order were the journal of CCA (N=69, 18.2%), the journal of KSC (N=68, 17.9%), the journal of KSFB (N=52, 13.7%), the journal of KHEA (N=39, 10.3%) and the journal of KSCI (N=3, 0.7%); (3) the proportions of the research themes for the women's wear study were in the order of the case study in marketing (N=135, 35.5%), body measurements and sizing systems in clothing construction (N=88, 23.2%), fashion design and aesthetics (N=83, 21.8%), pattern-making (N=63, 16.6%), and color study (N=11, 2.9%) and so on.

• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.145-159
• /
• 2003

The purpose of this study was to classify body type for ready-to-wear sizes. The subjects were 300 women ages of 18-24. they were measured direct anthropometry. The body types for sizing system were divided by Rohrer Index. KS drop value and ISO drop value. The results of this study were as follows. 1. By adapting the Rohrer Index. we classify 3 types from anthropometric measurements. The thin type covered 39.3%, the standard type 51.0% and the obesity type 18.7%. The characteristics of clusters were as follows. Thin type was characterized by tall. slender type and slim. The standard type was characterized by middle sized. The obesity type was characterized by short. fat type. and large bust. 2. By adapting the KS system drop value. we classify 3 types from anthropometric measurements. The H type(drop 0) covered 25.6%. the N type(drop 6) 65.2% and the A type(drop 12) 9.2%. Type H was slightly tall large bust. and curved from waist to hip. Type A was slightly thin. large hip and smaller bust than type N. Principal factor components were bust size. The height could be divided into three groups. The Petite(l50cm) covered 5.5%. the Regular(l60cm) 64.7% and the Tall(l70cm) 29.8%. Through the crosstab of height and body type. we extracted regular height by N type 46.2% the largest cell. The body type was the higher order of N type. H type and A type. The tall was the higher order of Regular. Tall and Petite. 3. By adapting the ISO system drop value. we classify 3 types from anthropometric measurements. The H type(drop 0) covered 15.0%. the M type(drop 6) 41.0% and the A type(drop 12) 44.0%. Type H was slightly short. slightly fat and large bust. Type A was slightly tall. slight thin than type M. The height could be divided into three groups. We adjust the height section after allow for height distribution. The Short(152cm) covered 12.8%. the Regular(160cm) 66.9% and the Long(168cm) 20.3%. Through the crosstab of height and body type, we extracted regular height by M type 29.3% the largest cell. The body type was the higher order of M type, A type and H type. The tall was the higher order of Regular, Long and short.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.9-17
• /
• 1999

The study investrgated the properti es of lh$\xi$ dust~ from felToalloy manufacture, The chemical composition, composItron material, particle size and shapes of the bulk dust, sized dust and magnetically separated dust were llivestigated. As the result, we s suppose that the dust from HLgh Carbon Fenomauganesc Manufacturing Process is not sufficient as soource material of Mn because of the low Mn conteut (13.5%) aud complicated composition material The dust from Bag Filter of AOD Process is m mainly made up of $0.2~2\mu\textrm{m}$ $Mn_3O_4$ (Hausmatmite) particle in spherical shape and the Mn content is 63.1%. The dust from Cooler of AOD Process is mainly made up of coarse $Ca(OH)_2$ Mn, $Fe_yO_2$ $SiO_2$ and fine $Mn_3O_1$.