• 한국잠사곤충학회지
• /
• 제13권1호
• /
• pp.69-72
• /
• 1971

1. 연감시료량의 적정량을 알아보기 위해 200, 100, 50, 20, 10gr의 생사시료를 연감검사한 결과 각처리간에는 통계적차이를 인정할 수 없었으나 실제로 시료량의 과대 과소에 따른 측정 및 처리오차를 감안할 때 100gr 시료가 적정량이었다. 2. 섬도사를 이용하여 연감검사를 할 경우 꼬인 상태와 풀은 상태로 연감처리할 경우 탄산나트륨같이 제교력이 강한 정연제에서는 차이가 없었으나 Marseilles 비누같이 제교력이 약한 것은 연감율에 있서 현저한 차이가 있었다. 3. 5종의 정연제를 비교한 결과 합성세제와 국산 Marseilles비누와 통계적 유의차를 인정 할 수 없으므로 이와의 대체 이용이 가능하다. 4. 정연제의 제교력은 대체로 정연액의 PH가 클수록 크고 작을수록 작은 경향이 있다.

• 소성∙가공
• /
• 제17권2호
• /
• pp.124-129
• /
• 2008

Net shape forging technologies give many effects into the costs and qualities for the finished products. So, the studies to reduce the additional machining amount are very important in forging industry. Specially, there are two main topics in cold forging industry, such as, tool life and precision forging. In this study, new forging technique was proposed to eliminate the machining process for fixing up the length and improve the lead accuracy of gear. The luck-up hub is manufactured through many processes, such as upsetting, piercing and direct extrusion. The gear is formed in direct extrusion process; however, lead accuracy of the gear is over allowance limit. Therefore, the additional sizing process must be added. In this study, process design for closed-die forging of a lock-up hub used for a component of automobile transmission was made using three-dimensional finite element simulations, and the strain distributions and velocity distributions are investigated through the post processor. The rigid-plastic finite-element method for back pressure forging has been used in order to reduce development time and die cost. Using the FEM simulation, we found the optimum value of back pressure. The prototypes of lock-up hub parts were forged into the net-shape. In the experiment, lead precision of tooth are measured by the CCMM(Contact Coordinate Measuring Machine). The dimensional accuracy of forged part was improved up to the 40% when back press was applied.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.25-30
• /
• 2007

Recently the use of web offset printing has been increasing, which can provide high print speed, mass production, and high print quality. However, high speed web offset printing has frequently undergone a blistering problem when the printed paper passes through hot air dryers. Blistering occurs in the middle of the base paper or in the coating layer. This paper focused on the blistering occurring in the base paper. In order to elucidate the effect of pigment ratio on blistering, 6 types of coating color were prepared with varying GCC/clay ratios and printability and blistering were investigated focusing on structure changes in the coating layer. When the clay content in the coating layer was increased, surface roughness and surface strength were decreased and paper gloss was increased. In addition, it was found that the coating layer structure with high clay content, which contains lots of discontinuous pores, hindered water vapors to penetrate out and, as a result, blistering occurred.

• 비파괴검사학회지
• /
• 제19권6호
• /
• pp.426-432
• /
• 1999

발전설비를 구성하는 주요 기기중 펌프, 발브, 배관 등의 용접부에 발생할 수 있는 균열 등의 결함을 검출하기 위한 plus-point 와전류검사탐촉자를 설계하여 결함을 검출하고 그 크기를 측정할 수 있는 검사기법을 연구하였다. 차동형 모드로 운전되는 plus-point 와전류탐촉자는 2개의 "I"자형 코일 이 십자형태로 교차되어 있으며, 탐촉자와 시험체 표면사이의 lift-off 변화에 의한 영향이 재래식 표면 탐촉자에 비해서 작게 발생하는 특징이 있다. 결함에 대한 탐촉자 반응을 평가하기 위해서 304 스텐 인레스강 용접부에 인공결함인 균열성 노치를 방전가공하여 시험편을 제작하였으며, 이를 활용하여 plus-point 와전류탐촉자의 결함 검출, 종류 판별 및 크기를 측정 할 수 있는 기법을 연구하였다.

• 비파괴검사학회지
• /
• 제13권3호
• /
• pp.7-13
• /
• 1993

AISI 4130 금속재를 사용한 균열 컴팩터 인장시편의 파괴거동이 음향방출(AE) 및 초음파 C-scan을 이용하여 조사되었다. 모든 시편들을 특정 수준의 하중까지 증가시키면서, 크랙 개구변위 (COD)와 더불어 여러가지의 음향방출 인자들을 얻었다. 크랙 선단의 크랙 개구변위와 손상(소성)역을 계산하기 위하여 탄소성 유한요소 해석이 수행되었다. 펄스-반사, 침수형으로한 초음파 C-scan은 손상역 크기와 상사시키기 위하여 행해졌다. 유한요소 해석 결과와 측정된 크랙개구변위는 만족할 정도로 일치하였다. 음향방출 결과에서, 시험시편들은 연성거동을 나타내었다. 총 사상수대 크랙 개구변위의 기울기는 크랙 개시점을 결정하는 데에 유용하였다. 예비 시험적인 C-scan 화상은 손상역의 초음파 진폭변화를 보여주었고, 손상역의 형상 및 크기가 유한요소 결과와 정성적으로 부합되었다. 손상역 크기에 관한 추가적인 연구가 요약되었다.

• 한국의류학회지
• /
• 제9권3호
• /
• pp.1-7
• /
• 1985

연구의 목적은 의류생산에 있어서 동양(Oriental women)과 서양여자(Caucasian women: U.S.A)의 인체계측에 의한 치수의 비교를 하였다. 연구자료는 동양여자 100명과 서양여자 970명의 자료로 비교하였다. 동양여자의 인체계측치는 1981년 4월 일본에서 필자에 의해 수집되고 서양여자의 인체계측치는 1976년 11월부터 1977년 2월 미국(U.S.A by the Quartermaster Corps of the United States Army)에서 인체계측을 한 자료이다. 동양과 서양여자의 인체계측치 중에서 각각 32항목을 선출하여 비교된 것은 높이항목과 길이항목(height-related measurements; height and length), 나비항특(surface measurements; breadth and depth) , 둘레항목(measurement of circumference)이다. 32항목을 평균치의 t-test로 동양인과 서양인을 비교한 결과, 모든 항목에서 P<.001 수준에서 유의한 차를 보였다. 그 중에서 머리둘레, 목둘레, 손목둘레, 팔굼치둘레, 손바닥둘레의 항목에서는 동양인이 서양인에 비해서 큰 값을 나타냈다. 그 외에 27개 항목은 동양인이 전부 높거나, 길거나, 또는 큰 값을 나타냈다. 표준편차에서 보이는 바와 같이 서양인자가 동양여자보다 크고, 특히 높이 항목, 길이항목(height-related measurements)이 더 높거나 길다. 이러한 결과로서 동양과 서양여자의 인종적인 측면에서, 다양한 의류생산에 있어서 고려해야 할 것 같다. 이 동양과 서양여자의 인체계측비교에 중요한 요점을 두고 연구한 것은 의류생산과정에 있어서, size설정, 보다 미적인 design, 의복구성을 위한 등등에 고려되겠으나, 특히 미국과 같은 대량생산국에서 동양과의 무역(import or export)에 있어서 중요하게 고려가 될것이며, 나날이 발전하는 우리나라의 의류무역에도 고려되리라 본다. 뒤에 recommendations for future research에서 말한 바와 같이 서양과 한국여자의 입체계측비교를 하며 우리나라의 의류무역(수출)에 도움이 되었으면 한다.

• 패션비즈니스
• /
• 제22권3호
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1092-1101
• /
• 2005

The purpose of this study is to analyze the size of ready-made clothing for elderly women and to evaluate their fit according to body type. Subjects were 33 women aged 60 and older, and they were classified by stature and drop index. The size of clothing which manufactured by four apparel brands were measured and compared with body size, and the size designation of four brands was compared. The questionnaire was carried out to subjects, and the size recognition and dissatisfaction with ready-made clothing were analyzed. The fitting test were carried out, and the subjects evaluated the fit of jackets and slacks of four brands. In the result of questionnaire, we found that subjects had little recognition about their clothing size. Subjects responded that they often felt dissatisfaction in their jacket length, sleeve length, shoulder width, bust girth, slacks, and waist girth. We found that each apparel brands had different sizing system and that even if the size designation of label was same, the clothing size was quite different. So the elderly women who didn't have so much knowledge about their own clothing size had a tendency to confuse with choosing proper clothing for themselves. In the wearer's evaluation, the significant difference in the degree of unsatisfaction were certified in several body parts according to wearer's body type. Especially, the degree of unsatisfaction in the case of subjects of having very small stature or very small hip was higher than other body types. From the result, we certified that it was necessary to consider the characteristics of each body type to increase the satisfaction of elderly women with clothing.

• 한국의류학회지
• /
• 제28권9_10호
• /
• pp.1300-1311
• /
• 2004

The aim of this study was to provide the 2 and 3 dimensional statistics requisite in the sizing system and design of gloves. The 64 2-dimensional static measurements were selected to provide information about hands. Participants in the study were 824 adults, aged between 18 and 64. To summarize the information from the measurement values, a Factor Analysis and a Cluster Analysis among multivariate analyses were performed. 3-D scanner was used for visual results of hand shape of each cluster. The results were as follows. Twenty-two items were used for the factor and cluster analysis in order to classify the adult hand shape. The variable quantities that are explained by a total of 3 factors amounted to under 79.37% of the variable quantities. The definition results of the factors related to the hands are as follows: Factor 1 is the horizontal dimension, the thickness of hand factor; Factor 2 is the height of the crotch; and Factor 3 is the vertical dimension of the hand. The adults' group hand was divided into 2 clusters according to a cluster analysis using factor scores. The characteristics according to hand type were as follows: Cluster 1 referred to high horizontal dimensions and thickness, rather small vertical dimensions and crotch height; and Cluster 2 represented the rather smaller horizontal dimensions and thickness but longer hand length than Type 1. To provide specific shape data of each cluster, 3-D scanner measurement was performed. 3-dimensional data base was developed for each cluster type and visual information was provided.

• 한국의류학회지
• /
• 제38권5호
• /
• pp.627-637
• /
• 2014

This study explored the product attributes Vietnamese mothers consider for the purchase of children's wear, the differences of product attributes between groups with different levels of conspicuous consumption, and the extent to which the Korean wave affects the purchasing behavior of children's wear brands. The results are as follows. First, the product attribute that Vietnamese mothers consider most when purchasing children's clothes is the comfort in physical activities. Fabric type and quality, sizing and fit, durability, color, child suitability, design, cutting and construction, price, fashionability, and maintenance and laundering are the other attributes (respectively) that influence the purchase of children's wear. Second, the high conspicuous consumption group considers brand, maintenance and laundering, durability, the reactions of others, and fashionability significantly more than the low conspicuous consumption group. Third, the purchase intention of Korean children's wear brands is affected by the perception of the Korean wave than the influence of the reference group or the tendency of conspicuous consumption. The results show that low prices and practicality were important considerations for children's clothing purchases by Vietnamese mothers; however, brand name and fashionability were more powerful predictors for the high conspicuous consumption group. Those with a high perception of the Korean wave also had a higher intention of Korean children's wear brand, which is indicative of the halo effect of the Korean wave. Thus, Korean children's wear brands that plan to enter the Vietnamese market should make active use of the Korean wave.