• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.307-311
• /
• 2010

EPCglobal Class-1 Gen-2 protocol has been proposed for UHF-band RFID systems. In Gen-2 standard, Q-algorithm was proposed to select a frame size for the next query round without estimating the number of tags. Therefore, the Q-algorithm has advantage that the reader's algorithm is simpler than other algorithms. However, it is impossible to allocate the optimized frame size. Also, the original Q-algorithm did not define an optimized parameter C for adjusting the frame size. In this paper, we propose an adaptive Q-algorithm with the different parameter $C_c$ and $C_i$ in accordance with the status of reply slot. Simulation results show that the proposed adaptive Q-algorithm outperforms the original Gen-2 Q-algorithm.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.12
• /
• pp.1051-1060
• /
• 2010

The effect of materials on fuel coolant interactions (FCIs) was analyzed on the basis of a solidified particle size response for TROI experiments.$^{(1)}$ The solidified particle size response can provide an understanding of the relationship among the initial condition, the mixing, and an explosion. Through a comparison of the size distributions of the solidified particles in the case of explosive and non-explosive FCIs, it is revealed that an explosive FCI results in the production of a large amount of fine particles and a small amount of large particles. The material effect of the size of solidified particles was analyzed using non-explosive FCIs without losing the information on the mixing. This analysis indicates that an explosive melt includes large particles that participate in the steam explosion, whereas a nonexplosive melt includes smaller particles and finer particles.

• Journal of the Optical Society of Korea
• /
• v.14 no.3
• /
• pp.221-227
• /
• 2010

Aerosol size distribution provides good information for predicting weather changes and understanding cloud formation. Aerosol extinction coefficient and backscattering coefficient are measured by many scientists, but these parameters depend not only on aerosol size but on aerosol concentrations. An algorithm has been developed to measure aerosol parameters such as ${\AA}$ngstr$\ddot{o}$m exponent, color ratio, and LIDAR ratio without any assumptions by using two wavelength rotational Raman LIDAR signals. These parameters are good indicators for the aerosol size. And we can find ${\AA}$ngstr$\ddot{o}$m exponent, color ratio, and LIDAR ratio under various weather conditions. Finally, it can be seen that the ${\AA}$ngstr$\ddot{o}$m exponent has an inverse relationship to the particle size of the aerosol and the color ratio is linearly dependent on the aerosol size. An ${\AA}$ngstr$\ddot{o}$m exponent from 1.2 to 3.1, a color ratio from 0.28 to 1.04, and a LIDAR ratio 66.9 sr at 355 nm and 32.6 sr at 532 nm near the cloud were obtained.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.138-150
• /
• 2013

The purpose of this study was to investigate research trends of subject matter in clothing construction field in clothing and textiles and to suggest the information for the future directions for fashion business and research. 2737 articles with clothing and textiles subject matter, 350 articles with clothing construction field in the Journal of Korean Society of Costume and Journal of the Korean Society of Clothing and Textiles from 2001 through 2010 were analyzed. The major conclusions of the study are as follows: 1. Clothing construction field took 12.8% with 350 articles in the researches of the Journal Publications in 2000s. 2. Clothing construction field showed more proportions in the latter half of the decade. 3. Clothing construction field were classified into 5 topics : topic of basic pattern and pattern for apparel, topic of body types, topic of functionality of clothing and protective clothing, topic of size system of apparel, topic of sewing and manufacturing process. 4. In clothing construction field, topic of basic pattern and pattern for apparel took the most proportions. 5. Topic of body types, topic of functionality of clothing and protective clothing, topic of size system of apparel, topic of sewing and manufacturing process were followed.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.937-940
• /
• 2010

본 연구는 fine blanking 프레스로부터 기능면으로 사용되는 100% clean cut 전단면을 얻는 fine blanking 공정에서 die roll을 최소화하기 위한 목적으로 성형 해석 및 실험적 방법을 통해 die chamfer 형상에 따라 성형되는 제품의 die roll size 변화를 검토한 것이다. fine blanking 과정을 묘사하기 위하여 deform 2D를 이용하여 성형 해석을 수행하여 die roll size를 예측하였으며, 실제 die chamfer가 다른 die insert를 제작하여 fine blanking 실험을 실시하여 die chamfer 형상에 따른 die roll size에 대한 해석 data와 실험 data를 비교 분석하여 die roll 길이 방향 size의 경향을 파악할 수 있었다. 이 연구 결과는 fine blanking 판재 성형에서 die roll을 최소화하기 위한 die chamfer 설계에 유용하게 적용될 것으로 판단된다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.4
• /
• pp.635-641
• /
• 2010

In this paper, we propose an efficient public key broadcast encryption system which can also extend traitor trace and revoke system. Although the proposed system has limited collusion size, the ciphertext size in the system can be sublinear in the number of total users, the private key size is constant, the computational cost can be sublinear and it can support black-box tracing algorithm, therefore, our system can be an option to applications where reducing the ciphertext size, private key size is a top priority. Furthermore, we can also apply our system to military document broadcast system, because it has such an efficient measurement.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.534-539
• /
• 2010

$HfB_2$-HfC composites were prepared by reactive hot pressing using Hf and $B_4C$ at temperatures of 1800 and $1900^{\circ}C$ for 60 min under 32 MPa in an Ar atmosphere. The reaction sequences of the $HfB_2$-HfC composite were studied through series of pressureless heat treatments ranging from 800 to $1600^{\circ}C$. The effect of size reduction of the starting powders on densification was investigated by vibration milling. Fully dense $HfB_2$-HfC composites were obtained by size reduction of the starting powders via vibration milling. The oxidation behaviour of the $HfB_2$-HfC composites at $1500^{\circ}C$ in air showed formation of a non-protective $HfO_2$ scale with linear mass gain. Examination of the mechanical properties showed that particle size reduction via vibration milling also led to improved flexural strength, hardness and fracture toughness.

• Animal Systematics, Evolution and Diversity
• /
• v.26 no.1
• /
• pp.79-82
• /
• 2010

new species Iotrochota rutzleri n. sp. (Demospongiae: Poecilosclerida: Iotrochotidae) was collected from intertidal zone, Sinyangri, Seongsanpo, Jejudo Island, Korea during 2008-2009. Iotrochota rutzleri n. sp. is similar to I. baculifera Ridley, 1884 in composition of spicules and skeletal structure. However, it is different in size of spicules, growth form and colour. All spicules of this new species are smaller than those of the latter.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.2
• /
• pp.133-146
• /
• 2021

It is important to conduct an anthropometric study to develop garment patterns to accommodate the changes found in the body size and type of men in their 30s, to effectively address fit dissatisfaction. Thus, this study aims to explore changes in the lower body sizes and body types of men in their 30s, and provide basic measurements for designing pants patterns. For this purpose, key anthropometric dimensions for the lower body of men in their 30s, which were acquired by the 6th (2010) and 7th (2015) survey conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major lower body sizes to track changes over time. Factor and cluster analyses were used to classify lower body types. From the comparison of the 6th (2010) and 7th (2015) surveys, it was found that the overall lower body size of men in their 30s were increasing in the height-related aspects, circumference, thickness, and width-as well as body weight and BMI. The five factors were derived to determine the typical lower body types of men in their 30s and the body types were classified into three categories through cluster analysis: (1) those with the largest body size, body volume, and obesity, (2) those with smallest body size, lower body volume, and obesity degree, visually the most skinny type, (3) those with BMI and weight that are the smallest, like Type 2, but the main circumference of the lower body is lower. In order to visually look at the statistical analysis, results were presented by producing a avatar based on the main lower body values.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.725-733
• /
• 2010

This study examined the understanding and use of information on nutrition labels based on one serving size among female consumers above the age of 20 in Seoul area. According to the survey, 69.9% of respondents were aware of the current system of nutrition labeling based on one serving size, and 51.8% of the respondents expressed their dissatisfaction with the system because the nutrition labels were difficult to understand or appeared unreliable. The nutrition label literacy of the consumers varied with respect to different packaging units. The respondents were likely to be less accurate in calculating the expected caloric intake when only portions of a multi-serving package were used. Initially 69.0% of respondents reported that they had read the nutrition label before purchasing a product but 91.9% of respondents said that they would check the label after learning how to read the label properly. It is very important to make consumers aware that the labels are very reliable sources of nutrition information. A public education campaign on the use of nutrition labels should focus on developing the consumers' ability and skills in using the label information when choosing foods.