• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.91-96
• /
• 2005

This study was performed for the research on the method for reducing non-point pollutant with the gabion which was made of gravel-packed plastic frame, and for the characterization of gabion adsorbing pollutant. The result showed that the concentrations of suspended solid in turbid water were reduced to $77.7{\sim}84.7%$ when the water was flowing through the gabion. The uniformity coefficients on the grain size accumulation curves of the adsorbed pollutant were larger on the large grain size gabion than those on the small grain size gabion, and the coefficients of curvature were smaller on the large grain size gabion than those of the small grain size gabion. The adsorption rates were dependent on the grain size of packed gravel. The rates were smaller on inlet and outlet than those on middle place on the series of gabion.

• 한국대기환경학회지
• /
• 제10권2호
• /
• pp.124-129
• /
• 1994

Aerosol size distribution was determined using Anderson sampler for the anions( sulfate nitrate and chloride ) and TSP. Ionic species concentration and size distribution have been investigated in the daytime and nightime individually. Size classified samples were extracted with distilled water and analyzed for C $l^{[-10]}$ , N $O_3$$^{[-10]}$ and S $O_4$$^{2-}$, by ion chromatography. The size distribution of these ions and TSP was analyzed to investigate the seasonal and diurnal variation of concentrations as follows: (1)Size distribution of TSP showed bi- modal type in the daytime, but indicated tri-mode distribution in the nightime without any seasonal variation. (2)Sulfate concentrations were higher in fine- mode both in the daytime and nightime but fraction of sulfate was higher in coarse-mode during the Yellow Sand Period. (3)Nitrate and Chloride ions are dominant in fine-mode in winter while dominant in coarse-mode in the summer.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.702-703
• /
• 2006

The particle size distribution and shape are among the important parameters for characterisation of quality of metal powders. Specific material properties such as ability to flow, reactivity as well as compressibility and its hardening potentials hence the most important characteristics of sintered metals - are determined by the size distribution and shape. The correct particle size distribution and particle shape information are the key to best product quality in atomisation processes of aluminium, milling of pure metals and other processes. This paper presents state-of-the-art technology for characterization of particle size distribution and shape.

• 한국분말재료학회지
• /
• 제25권1호
• /
• pp.19-24
• /
• 2018

Cu-Fe alloys (CFAs) are much anticipated for use in electrical contacts, magnetic recorders, and sensors. The low cost of Fe has inspired the investigation of these alloys as possible replacements for high-cost Cu-Nb and Cu-Ag alloys. Here, alloys of Cu and Fe having compositions of $Cu_{100-x}Fe_x$ (x = 10, 30, and 50 wt.%) are prepared by gas atomization and characterized microstructurally and structurally based on composition and powder size with scanning electron microscopy (SEM) and X-ray diffraction (XRD). Grain sizes and Fe-rich particle sizes are measured and relationships among composition, powder size, and grain size are established. Same-sized powders of different compositions yield different microstructures, as do differently sized powders of equal composition. No atomic-level alloying is observed in the CFAs under the experimental conditions.

• Journal of the Korean Wood Science and Technology
• /
• 제45권3호
• /
• pp.288-296
• /
• 2017

본 연구에서는 분무건조 조건 및 계면활성제 첨가에 따른 리그노셀룰로오스 나노피브릴(lignocellulose nanofibril, LCNF)의 분무건조 수율 및 건조 LCNF의 형태학적 특성, 치수분포 및 수재분산성을 조사하였다. 원료로는 약 70-300 nm 직경을 지니는 섬유상의 LCNF를 사용하였으며, 분무건조 LCNF는 rod형 파티클의 형태학적 특성을 보였다. $140^{\circ}C$ 온도조건에서의 분무건조 수율이 가장 높았으며, 분무건조 LCNF의 입자크기 또한 가장 작았다. LCNF 현탁액의 농도가 감소할수록 또한 송풍량이 증가할수록 분무건조 수율 및 입자크기가 증가하였다. 또한, 계면활성제의 첨가로 건조 수율을 향상시킬 수 있었으며, 첨가 비율이 증가할수록 평균입자크기가 감소하였다. 건조 LCNF의 입자 크기가 감소할수록, 물에서의 재분산성이 향상되었으며, 수현탁액의 여수시간이 증가하였다.

• 한국세라믹학회지
• /
• 제29권7호
• /
• pp.525-532
• /
• 1992

TiO2 fine powder was synthesized in the gas phase by chemical vapor deposition using hydrolysis of TiCl4. Content of rutile phase in the powder was investigated. Powder characteristics such as size, crystallinity and morphology were also studied by means of TEM, SEM and XRD. Rutile phase in TiO2 powder started to be formed from 100$0^{\circ}C$ and the content increased with the reaction temperature and TiCl4 concentration. As the temperature increased from 80$0^{\circ}C$ to 140$0^{\circ}C$, the primary particle size increased while secondary particle size decreased. Spherical secondary particle with fine primary crystals agglomerated was produced at low temperature of 80$0^{\circ}C$ whereas the grown primary particle being final particle size was produced at higher temperature of 140$0^{\circ}C$. Other effects of TiCl4 and H2O partial pressures on particle size were also reported in this study.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.678-679
• /
• 2006

The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of $Ba^{2+}$ ion in these particle sizes from the analysis of surface properties by XPS.

• 비파괴검사학회지
• /
• 제5권2호
• /
• pp.42-48
• /
• 1986

Electromagnetic - Acoustic Transducers for the inspection of tubes were developed using permanent magnets and induction coils. The propagation velocity of ultrasonic waves in a tude wall was measured by the transducers. The position of a flaw in a tube and the relative size of flaws with different size were measured.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.771-772
• /
• 2008

In this paper, we analyze the characterization of Mibench, an embedded system benchmark program, using simplescalar simulator. The experimental results show Mibench generally is formed by lots of integer and memory access instructions. Especially, IPC of rijndael decoding is effected by cache size largely, but IPC of CRC32 is few effected by cache size or branch predicting algorithm.

• 한국표면공학회지
• /
• 제38권5호
• /
• pp.198-201
• /
• 2005

Nickel amalgam was Prepared by the electro-deposition with mercury cathode in a modified Watts bath. Homogeneous nickel amalgam was obtained. The fluidity of the amalgam decreased gradually with increased nickel quantity and become solid finally. Nickel powders of sub-micron size were obtained by a distillation of mercury from the amalgam. The characterization of the nickel amalgam was studied by SEM and x-ray diffractometry.