• 한국광학회지
• /
• 제31권6호
• /
• pp.268-273
• /
• 2020

레이저 빔이 산란 매질에서 반사될 때 발생하는 스펙클 패턴을 모니터링함으로써 산란 매질에 입사하는 레이저 빔들의 결맞는(coherent) 결합 상태를 분석하고자 하였다. 이를 위하여 가간섭성이 높은 3개의 시준 레이저 광원을 자유공간에서 렌즈를 이용하여 무작위 표면특성을 가진 산란목표물(scattering target)에 집속한 후, 되돌아오는 빔의 스펙클 패턴을 푸리에 영역에서 살펴보았다. 목표물에 입사하는 단일 레이저 빔의 크기변화 및 3개 결맞는 레이저 빔 간의 공간적인 빔결합 정도에 따라 스펙클 패턴의 평균적인 크기가 변하게 되는데, 이를 푸리에 영역에서 분석함으로써 결맞음 빔결합의 효율을 판별할 수 있는 단일 모니터링 변수를 도출할 수 있었다.

• 디지털융복합연구
• /
• 제14권6호
• /
• pp.457-466
• /
• 2016

본 연구는 친환경 병원을 실현하는데 도움이 되는 연구로서 병원의 전력사용량에 미치는 기상요인의 영향을 실증적으로 검증하고자 한다. 이를 위해 2009년부터 2013년까지 일별 자료를 기준으로 2개 종합병원을 대상으로 기상조건에 따른 전력 사용 패턴과 그 영향을 분석하였다. 분석결과, 병원 건물의 전력사용량에 가장 큰 영향을 미치는 기상요인은 '기온'으로 나타났고, 병원의 규모에 상관없이 유의한 영향을 미치는 것으로 나타났다. 그러나 병원의 전력소비 패턴은 병원의 규모에 따라 차이가 있었다. 큰 규모의 병원에서는 선형의 전력소비 패턴이 나타났지만 작은 규모의 병원에서는 2차 곡선의 비선형 패턴으로 나타났다. 더운 여름과 추운 겨울에 병원 건물의 전력사용량이 증가하는 전형적인 전력소비 패턴을 보이는 것으로 나타났다. 본 연구결과는 에너지 절약과 친환경 건물 개선을 위하여, 병원 건물의 기능적 특수성뿐만 아니라 기상요소를 반드시 고려해야 한다는 것을 시사한다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제7권8호
• /
• pp.281-286
• /
• 2018

최근 정보의 복잡성과 다양성 및 방대한 양의 가용 정보가 증가함에 따라 대규모 데이터로부터 의미 있는 검색 결과를 추출하는 방법으로서 온톨로지에 대한 관심과 필요성이 증가하고 있다. 주어진 자연어 텍스트로부터 온톨로지를 추출하는 많은 방법이 제안되었지만, 현재 대부분의 방법은 온톨로지의 구조에 일치되도록 추출하지 못하는 실정이다. 본 논문에서는 온톨로지를 구축하기 위해 필요한 용어를 특정 도메인에서 주어진 텍스트와 구별하고 패턴 기반 방법을 기반으로 용어 사이의 다양한 관계를 추출하는 방법을 제안한다. 용어들 간의 관계를 추출하기 위해 일치 패턴 집합을 고려하고 조인 집합 개념과 패턴의 정렬을 연결하여 검색 공간의 크기를 줄이는 방법을 제안한다. 그 결과 이 방법이 검색 공간으로부터 유용한 어떤 패턴도 제거하지 않고 50-95% 정도로 검색 공간의 크기를 줄이는 결과를 보였다.

• 한국의류학회지
• /
• 제31권7호
• /
• pp.1008-1019
• /
• 2007

The purpose of this study was to develop an appropriate jacket pattern for elderly women over sixty years old, providing a good fit and appearance. Results were as follows: The length of the jacket was made long enough to cover the area 22.0cm below the waistline. The waist back length was made 1.7cm longer than the actual size of the waist back length. The armhole length was made 0.5cm longer than B/4, enhacing the appearance and functionality while allowing freer movement of the arms. As for the front and back interscye breadths, the front interscye breadth was made 1.7cm larger than the actual size while the back interscye breadth was only 1.0cm larger, providing the front interscye breadth more space. The bust breadth was made 10.0cm larger than the bust circumference measure(B/4+2.5cm), the waist breadth was made 6.0cm larger than the waist circumference measure(W/4+1.5cm), The hip breadth was made 12.0cm larger than the him circumference measure(H/4+3.0cm). The sleeve length was made 3.0cm larger than the arm length measure, as the sleeve length of a jacket is usually long enough to cover the ulnar styloid. The sleeve width was made 5.0cm larger than the upper arm circumference measure, as the upper arm circumference measure of the model pattern was too large than necessary, worsening the overall appearance. The sleeve cap height was set at AH/4+4.7cm. The wrist circumference of 27.0cm was set, allowing 2/3 and 1/3 for the large sleeve and small sleeve respectively.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.634-640
• /
• 2004

Nowadays, the use of apparel CAD system is important to the mass production of ready to wear. Especially, computer-based grading is the most important process to improve the fitness of clothes and to reduce the time needed to make various size pattern. The purpose of this study was to suggest a standard sizing system for high school boys' pants and to suggest a grading method according to the sizing systems. The subjects were 217 high school boys of 16 to 18 year-old. The size intervals of waist girth and hip girth were 3 cm and 4 cm respectively. The sizing system, which had frequencies more than 4%, was classified 8 cases. Among them, 71-92 and 71-88 size were the most frequent size and were adopted the basic size for the two types of grading. According to the sizing system, hand-made patterns were manufactured. By measure of the each part of the slacks, 4 size's new grading-rule patterns were developed by each size. This result will contribute to clothing fitness of consumer and the amount of production.

• 한국의류학회지
• /
• 제37권5호
• /
• pp.655-666
• /
• 2013

Disposable protective coveralls that cover the entire face and body are essential for operations in contaminative or dangerous environments. This research studied disposable protective coveralls on Korean market in order to improve the products that agricultural workers wear. We investigated the size specifications of 22 disposable protective coverall products sold in Korean markets and analyzed how well the size specifications cover Koreans' sizes by comparing and analyzing the size specifications with Korean body measurements and Korean standards for protective clothing. We analyzed the consistency, regularity, and fitness to body measurements of Koreans for each size by measuring the sizes of 15 different parts for 22 products each. Current disposable protective coverall products for the Korean market are unsuitable for Korean body measurements, especially women's. It was expected that wearers would be unable to choose products that fit their bodies well just by the offered size specifications due to a lack of regularity between the measurements for each size. In this result, it was assumed that the development of KS standards and the coverall pattern that reflect the body measurements of Koreans are needed.

• 복식문화연구
• /
• 제16권5호
• /
• pp.852-862
• /
• 2008

The purpose of this paper is to find how to do the width of skirt and the girth of the waist in the adequate pattern making for the obese women's skirt. Appearance test of the five experimental skirts was evaluated by the four experts in clothing construction. At the same time, 3D clothing air volume was observed for the five types of experimental skirt with different size specifications. The results from the appearance test were as follows; when the width of skirt pattern is set for(the shell girth/2), it was suggested w/4+1(front), w/4(back) for girth of the waist. On one hand, in case of (the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front)/2 and(waist girth of back)/2 for obese women's skirt with the best appearance. As results, it was found that the width of skirt pattern for the obese women should be the greatest shell girth instead of hip girth. In the case of the hip girth, the amount of ease on hip was suggested 6cm. It was found that pattern with the wrinkle of ease was full of the gaps between body and skirt in 3D clothing air volume. In spreading out to 2D flat pattern from 3D scan data, when the width of skirt pattern was set for(the shell girth of front)/2+(the shell girth of back)/2, it was suggested(the waist girth of front/2)+(the waist girth of back/2) than the shell girth/2 in girth of the waist for the best appearance. And the conversion of 3D scan data into 2D flat pattern in curve shape of crosswise had to spread out of the plane in straight line. The obese women's clothing should be manufactured with systematical consideration of the diversity and scarcity of the obese women's body shape.

• 한국생활과학회지
• /
• 제21권2호
• /
• pp.285-298
• /
• 2012

Considerable number of women are enjoying swimming, however, the chest-region of swimsuits including cup inserts are not stable during swimming. The purpose of this study was to explore alternate designs and methods of stabilizing the breast cup to the swimmer's body by using 3D technology to design and position the pad and cup pattern of the swimming suit. To position the pad optimally, a 3D pattern of a nude woman was divided into blocks and different reduction rates were applied to blocks around the outlines of the breast. Two types of 3D patterns were developed. The first, referred to as the 'basic 3D pattern' provided for the curved surface of the breast point to be maintained with the remaining slack distributed evenly along the neckline, armhole and side seam. The second, referred to as the '1/3 shoulder moved 3D pattern' ignored the curved nature of the breast point by overlapping, with the resulting position of the shoulder strip moved toward the center. Three women of corresponding size and body shape evaluated the two 3D pattern designs as well as the conventional 2D pattern style of swimsuit. Respondents rated the'the basic 3D pattern' design highest in terms of stability and easy of movement in the chest region.

• 한국의상디자인학회지
• /
• 제18권1호
• /
• pp.121-133
• /
• 2016

The purpose of this study is to recognize the differences of visual evaluation by variations in pattern and silhouette of the block dresses. The stimuli are 9 samples: 3 variations of the silhouette and 3 variations of the size of pattern. The data has been obtained from 55 fashion students and has been analyzed by using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of this study are as follows; 1) The visual evaluation by pattern and silhouette of block dresses are composed of 4 factors: lovable personality, physical characteristics, boldness, and simplicity. 2) Block dresses were evaluated to display the figure more efficiently, such as looking slimmer or taller, in the order of 2nd stage, 1st stage, and 3rd stage in every silhouette. As the patterns became bigger, straight silhouette dresses were judged to have bolder, more dignified images. 3) Block dresses were evaluated to have cute and lively images in order of hourglass silhouette, straight silhouette, and fitted silhouette in every pattern. They were evaluated to appear slimmer and taller in order of hourglass silhouette, fitted silhouette, and straight silhouette in every pattern. 1st stage and 2nd stage dresses were evaluated to have a bolder, more dignified image in order of fitted silhouette, hourglass silhouette, and straight silhouette. 4) The pattern and the silhouette of the block dresses interacted with boldness. These were the boldest, most dignified image in the fitted silhouette and 1st stage, while they were not judged so in the case of the straight silhouette and 1st stage. 5) According to the MCA regarding lovable personality and physical characteristics, the silhouette affected the visual image of the block dresses more than the pattern did. According to the MCA on simplicity, the pattern affected the visual image of the block dresses more than the silhouette.

• 한국경영과학회지
• /
• 제31권1호
• /
• pp.15-24
• /
• 2006

In simulation input modeling, it is important to identify a probability distribution to represent the input process of interest. In this paper, an appropriate sample size is determined for parameter estimation associated with some typical probability distributions frequently encountered in simulation input modeling. For this purpose, a statistical measure is proposed to evaluate the effect of sample size on the precision as well as the accuracy related to the parameter estimation, square rooted mean square error to parameter ratio. Based on this evaluation measure, this sample size effect can be not only analyzed dimensionlessly against parameter's unit but also scaled regardless of parameter's magnitude. In the Monte Carlo simulation experiments, three continuous and one discrete probability distributions are investigated such as ; 1) exponential ; 2) gamma ; 3) normal ; and 4) poisson. The parameter's magnitudes tested are designed in order to represent distinct skewness respectively. Results show that ; 1) the evaluation measure drastically improves until the sample size approaches around 200 ; 2) up to the sample size about 400, the improvement continues but becomes ineffective ; and 3) plots of the evaluation measure have a similar plateau pattern beyond the sample size of 400. A case study with real datasets presents for verifying the experimental results.