• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.7
• /
• pp.1019-1028
• /
• 2004

The purpose of this study was to compare the body measurements of cyclists and non-cyclists and to classify cyclists＇ body types to offer basic information for the bicycle apparel manufacturer in Korea. The anthropometric data was collected including both direct and indirect measurements of 81 cyclists (40 female, 41 male) aged from 19 to 24. Anthropometric measurements were analyzed using percentiles, T-test, factor and cluster analysis. The results were as follows; Comparison of anthropomeoic data between cyclist and non-cyclist was to clarify that cyclists have bigger size than non-cyclists; especially the thigh circumference shows big differences. As the result of factor analysis, 5 factors, which explain 74% of variance, were extracted from all items for male and female cyclists. The results of cluster analysis classified body types into 3 groups. Cluster 1 among three female cyclist groups has biggest torso and had an erect back. Cluster 2 has small size among three female group and drooping shoulders. Cluster 3 has the bended forward shoulders and shows the protrusion back. In case of male cyclists, cluster 1 has thin body type owing to big height measurements and small girth measurements. Cluster 2 among three male groups has the biggest torso and thigh circumference. Cluster 3 has big forward angle of shoulders and shows the protrusion of the back as female cyclist.

• Journal of the Korean Home Economics Association
• /
• v.20 no.2
• /
• pp.73-84
• /
• 1982

The purpose of this study was to develop a basic bodice pattern and establish standards regrading to the size and grading of Korean misses' measurements in order to provide modern data for the ready-to-wear garment industry. 222 girls, aged from 18 to 27, were measured on 19 items of their structure. Mean, standard deviation, coefficient of variance, maximum, minimum, range and correlation coefficient between each items were analized. The analysis revealed the following significant results. The fundamental difference data of the bodice pattern and grading measurements between the year of 1975 and 1981 were as follow. (1) The measurements of bust and center back were used as a foundation to establish a standard size and grading. (2) Ranges of the bust circumference measurements were increased. Thus the sizes ere classfied into 5 groups. (3) The ease of bust circumference was increased due to the increasement of shoulder width. (4) The increase of the upper arm resulted to lower the bust line. (5) The shoulder slopes were higher than 1975. Therefore, the basic measurements of the shoulder slopes were reduced. (6) In spite of the front neck measurements were not changed, the back measurements were requied to increase. (7) the center front length became much shorter in the contrast with the increase of the center back length.

• Fashion & Textile Research Journal
• /
• v.24 no.1
• /
• pp.117-126
• /
• 2022

This study aims to analyze the sizing information of women's ready-to-wear pants as indicated on online retail websites and to suggest better sizing communication that can assist customers in making successful apparel size selections. We gathered size specifications and size reference information for basic straight pants from 34 online apparel retail websites. Although the Korean standard recommends labeling the body dimension-based sizing code and specification, most websites preferred to use various types of sizing codes. Body measurements were only used by a few websites, and garment dimension descriptions were the most common method to indicate product size. Many websites provided size reference information through customer review boards and fit model images, however, there was insufficient body size information to allow customers to infer the fit of their body type. When using the size guidance tools, the major data input points were stature and weight measurements. However, the waist measurements of pants sizes guided only by stature and weight values revealed inconsistent ease allowance for corresponding body size populations, especially in the overweight group. Based on our findings, we propose a more effective method of communicating the size information of pants online. We expect that this will contribute to the efficiency of online apparel product display and build a better shopping environment that satisfies both sellers and consumers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1530-1541
• /
• 2007

The purpose of this study is to establish a standard sizing system for Taekwondo uniforms. The sample utilized in the study consisted of 5,679 male and female subjects, obtained from Size Korea Project. Twenty three measurements were identified and selected as critical in the design and construction of Taekwondo uniforms. The results were as follows: First, it was determined that all brands used "height" as a key dimension of size designation. Two of brands added "chest girth" or "numeric numbers" to designate size in addition to "height". For example: 1) height/chest girth, 2) height/numeric number. The size pitches of all current Taekwondo uniforms in the market were 10cm of height for all brands. Second, the study showed male measurements were larger and longer than females, establishing that independent sizing specifications by sexes are needed. Third, in case of Taekwondo shirts, height and chest girth were selected as control dimensions. In case of pants, height and waist girth were selected as control dimensions. For selecting optimal sizing pitch, 2 different pitches of chest girth and waist girth(4cm pitch by KS and 8cm pitch by researchers) were compared, while height pitch was fixed at 10cm. Fourth, based on the analysis of the measurements(coverages and coverage efficiency rates), it was determined that 8cm pitches of chest and waist girth were efficient in both upper and lower Taekwondo uniforms. Fifth, subjects distribution counts and percentages were shown after analyzing coverage efficiency rates. Separate results are noted for the upper and lower Taekwondo uniforms. As previously mentioned, height pitches were 10cm and chest and waist pitches were 8cm. Finally, as a result of this research, key and referable measurements relevant to making Taekwondo uniforms were identified for male and female uniform. In case of Taekwondo shirts, 18 sizes were established for men, 16 sizes for women. Twenty five sizes for men and 20 sizes for women were presented in size tables for pants.

• Journal of the Korean Society of Visualization
• /
• v.2 no.1
• /
• pp.12-17
• /
• 2004

The physical characteristics of soot near the soot inception point were investigated with various measurements. In-situ measurements of particle size and volume fraction were introduced based on time resolved laser-induced incandescence (TIRE-LII) and laser-induced ion mobility (LIIM). The one has more convenience and accuracy than conventional LII technique and the other works best for particle sizes of a few nanometers at high concentrations in a uniform concentration field. A complementary ex-situ measurement of particle size is nano differential mobility analyzer (Nano-DMA), which recently developed for measuring particle sizes between 2nm and 100nm and provides high-resolution size information for early soot. Particles will be also collected on transmission electron microscope (TEM) grids using rapid thermophoretic sampling and analyzed for morphology. These measurements will allow fresh and original insight into the characterizing soot inception process. The measured physical properties of incipient soot will clarify the controlling growth mechanism combined with chemical ones, and the dominant mechanism for soot modeling can be deduced from the information.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.764-772
• /
• 2001

The purpose of this study was to examine the differences of perceived body size and actual body size between Korean and USA female college students of 18 to 26 year-old. Body measurements and survey were taken from August to September, 1998. The results are as follows: 1) There were differences between the body measurements of the Korean women and US women. Among 20 body areas, except only head length and neck circumferences, American women had bigger sizes than Korean women. 2) Compared to US females, Koreans perceived their body sizes as bigger and were more dissatisfied with their bodies than Americans. 3) Those who had thinner body sizes tended to be more satisfied with their bodies.

• The Research Journal of the Costume Culture
• /
• v.13 no.5 s.58
• /
• pp.671-685
• /
• 2005

The purpose of this study was to develop a new size range and size interval for early adolescent girls. For this purpose, a total of 529 girls aged between 10 and 14 were measured and data were collected from 42 anthropometric measurements and 41 photographic measurements per a person. SAS 8.1 was used in data analysis including means, standard deviations, and frequency analysis. The stature was divided at 5cm intervals as in KS into 9 sizes from the lowest 130cm to the highest 171cm. If waist circumference were divided at the same intervals, the sizes cannot reflect the body growth of adolescent girls at these ages. Thus this study set intervals between sizes irregularly based on the mean of waist circumference by the type of body shape. Based on the results, this study proposed: for Type A - 6 sizes (140A-58, 145A-54, 145A-62, 150A-58, 150A-62, 155A-62); for Type X- 9 sizes (150X-59, 155X-63, 155X-66, 160X-59, 160X-63, 160X-66, 165X-59, 165X-63, 165X-66): and for Type H - 7 sizes (145H-68, 150H-68, 150H-70, 155H-68, 155H-73, 160H-68, 160H-73). For the sizes selected for each type, reference measurements were decided - centering on items necessary for manufacturing clothes. Reference measurements suggested for lower garments 8 items including waist circumference, hip circumference, slacks length and crotch length. The suggested sizes are distributed in a wider range, so they are considered to be helpful for students to find clothes fitting their bodies.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.42-52
• /
• 2024

Background: The lack of headforms that accurately reflect the head characteristics of Koreans and the demographic composition of the Korean population can lead to inadequate FFR testing and reduced effectiveness of FFRs. Method: Direct measurements of 5,110 individuals and 3D measurements of 2,044 individuals, aged between 9 and 69 years, were sampled from the data pool of Size Korea surveys based on the age and gender ratios of the Korean resident demographics. Seven head dimensions were selected based on the ISO 16976-2, availability of Size Korea measurements, and their relevance to the fit performance of FFRs. A principal component analysis (PCA) was performed using the direct measurements to extract the main factors explaining the head characteristics and then the main factors were standardized and remapped to 3D measurements, creating five size categories representing Korean head shapes. Lastly, representative 3D headforms were constructed by averaging five head shapes for each size category. Results: The study identified two main factors explaining Korean head characteristics by the PCA procedure specified in ISO 16976-2 and developed five representative headforms reflecting the anthropometric features of Korean heads: medium, small, large, short & wide, and long & narrow. Conclusion: This study developed representative headforms tailored to the Korean population for conducting total inward leakage (TIL) tests on filtering facepiece respirators (FFRs). The representative headforms can be used for TIL testing by employing robotic headforms to enhance the performance of FFRs for the Korean target population.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.1
• /
• pp.141-151
• /
• 2010

The purpose of the study was to offer basic documents to the textile fashion industry by investigating changes of figures by various factors as each other social and environment. This study analyzes characterization and classification of body types of Mongolian men. 100 adult subjects within the 18 to 24 age group were studied. The physical measurements of the research subjects come up to a total of 63 items. Data was statistically analyzed with SPSS program using basic statistics, t-test, one-way ANOVA, Duncan-test, factor analysis and cluster analysis. The conclusions are as follows. In the result of factors analysis in physical measurements of Mongolian men, 10 factors such as the vertical size of body, on the obesity of body, the leg size, the bust from back length, the bust from front length, the shoulder size were extracted. The accumulated contributory rate of these was 73.86%. The cluster analysis for the comparison of the body types, by categorizing the body types produced three types. The comparison of 45 items in physical measurements between Korean men and Mongolian men resulted in the differences in 20 items. While the height items including stature between them showed negligible differences.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.6
• /
• pp.930-940
• /
• 2019

This study analyzes the facial data required for sheet design in order to pursue the facial compatibility of disposable sheets used in facial mask products that are increasing in popularity as self-care methods. The subjects of the study were 23 facial measurements of 1,001 women in their 20s to 60s from Size Korea's 6th 3D data. Through factor analysis, sheet-related facial measurements were collected into six factors included in the vertical length of each part of the face: length of face surface from the ear to each part of the face, width of eyes, nose, lips, length of nose, vertical length of lower face, width of the head and width of chin. Three sheet face types were classified using six factor scores as variables, and the characteristics of each type differed according to age group. As a result of the discriminant analysis to identify the dimension items that classify the three cluster types, 12 contributing items were extracted out of 23 items. This study provides useful information and data for further studies of products requiring facial fitness.