• 제목/요약/키워드: Size deviation

검색결과 704건 처리시간 0.031초

염(鹽)의 종류(種類)에 따른 격염구(隔鹽灸)의 열전달(熱傳達) 특성(特性)에 관한 실험적(實驗的) 연구(硏究) (The Experimental Study of Various Salts on the Characteristics of Heat Transfer in Indirect Moxibustion with Salt)

  • 이건목;이건휘;서은미
    • Journal of Acupuncture Research
    • /
    • 제21권1호
    • /
    • pp.119-135
    • /
    • 2004
  • Objective: The purpose of this study is to investigate the mechanism and effect of moxibustion with salt objectively, to be used as the quantitative data through the measurement of temperature, and to grasp the thermodynamic characteristics of moxibustion with salt. Methods: We have selected of the moxibustion with salt of indirect moxibustion. We make a comparative study of the thermodynamic characteristics of moxibustion with salt as a kind of the 4 salt. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa. Results: 1. We make out that it is not significantly change the time of thermal conduction of moxibustion with salt as a kind of 4 salt. 2. The heating period of Refined Salt was long and that of Sun-dried Salt was a short time respectively. The heating period of maximum tamperature is high Sun-dried Salt, Mechanical Salt and Refined Salt orderly. Maximun heating speed in the heating period was $0.151{\sim}0.184^{\circ}C/sec$ and at the same tendency of the maximum temperature in the heating period. 3. The retaining period was shorter than the heating period respectively, that is 15~24% of the combustion time of in the heating period. We make out that it is not significantly different the time of the retaining period as a kind of 4 salt. The mean temperature of retaining period was $43.2{\sim}48.1^{\circ}C$, that was extraordinarily high temperature. 4. We make out that it is not significantly different the time of the cooling period as a kind of 4 salt. The cooling period was measured 223~233sec. Beacuse the same density and size of moxa combustion was made an experiment. 5. The effective combustion time of Refined Salt is longer(259sec) than that of Sun-dried Salt(173sec). It is significantly different the time of the combustion time as a kind of 4 salt. 6. It is significantly different the Sample deviation of the combustion time as a kind of 4 salt because of the water content of the 4 salt individually. Conclusions: As the base on this study, we obtained the conclusion as the follows. The salt of moxibustion with salt was fitted for Sun-dried Salt due to making to Mechanical Salt recently. The Refined Salt is composition rate to another and small size comparatively. So It was fitted for the salt of moxibustion with salt. It is necessary to study continuously about the more suitable moxibustion with salt and quantitative analysis about the moxibustion with salt.

  • PDF

초미세분쇄/공기분급을 이용한 탈지미강 분획의 특성과 응용 (Microparticulation/Air Classification of Rice Bran: Characteristics and Application)

  • 박동준;구경형;목철균
    • 한국식품과학회지
    • /
    • 제25권6호
    • /
    • pp.769-774
    • /
    • 1993
  • Fluidized bed opposed jet mill을 사용하여 초미세분쇄한 후 Turboplex classifier로 공기분급한 탈지미강분말의 입도는 air classifying wheel speed (ACWS)가 낮아짐에 따라 입자의 크기와 표준편차는 증가하고 단위부피당 표면적은 감소하였다. ACWS 21,000rpm에서 분급한 미강분말의 형태는 구형이었으며 입도 median이 $3.7{\mu}m$이었다. ACWS별로 회수된 시료의 단백질, 지방, 회분은 ACWS에 따라 전반적으로 증가하는 경향이었다. Mg, Zn, Fe 및 Mn 함량은 ACWS가 증가할수록 비교적 증가하는 경향을 보였으며, phytic acid함량은 중간 ACWS에서 약간 높은 값을 보였다. 식이섬유함량은 $25.2{\sim}31.5%$의 값을 보였고, ACWS 15,000rpm에서 최대값을 나타내었다. ACWS에 따른 시료의 색도는 ACWS가 높을수록 백색도(L)가 증가하였고, 적색도(a)와 황색도(B)는 감소하는 경향을 나타내었다. 보수력(WHC)은 12,000rpm에서 2.88g/g solid로 가장 높았고 ACWS가 높아짐에 따라 감소하는 추세를 보였으나, 보유력은 반대로 ACWS에 따라 약간 증가하는 경향을 보였다. 분급된 미강분말 현탁액의 유동특성은 Bingham body에 속하였으며 농도와 ACWS가 증가함에 따라 항복응력 및 점도가 상승하였다. 분급된 미강분말을 5% 수준으로 대체하여 케이크를 제조한 경우 대조구보다 케이크의 높이와 부피가 증가하였다.

  • PDF

의료기관 특성별 지역환자구성비 (Regional Commitment Index of Hospitals)

  • 김경애;류시원;김영랑
    • 보건행정학회지
    • /
    • 제19권4호
    • /
    • pp.121-139
    • /
    • 2009
  • Objectives : The purpose of this study was to investigate regional commitment index(RGI) of hospital in Korea, and the relationship RGI and hospital characteristics, such as foundation, region, size. Therefore, we are to suggest fundamental information to make and evaluate healthcare resource policy in hospital- and government-level. Methods : The 'Patient Survey 2002(administered by Ministry of Health and Social Welfare(MOHW)' was analyzed. We selected the patient data of the hospitals above 100 beds. Then, we calculated the RGI, number of same cases divided by all cases in each hospital. By using SPSS/win ver 14.0, statistical analysis such as t-test, ANOVA, correlational and regression analysis was carried out. Results : The results are as follows. 1. Overall mean and standard deviation of RGI were revealed as 0.805${\pm}$0.225 in inpatients, and 0.871${\pm}$0.184 in outpatient. The median of inpatients' and outpatients' RGI were 0.890 and 0.933. The RGI of inpatients of private hospitals were revealed significantly higher than that of the public(public: 0.727, private: 0.822). However, outpatients' RGI was not revealed as significantly different. 2. The RGI of general specialty hospitals were significantly lower than others, therefore we could think that more inpatients and outpatients of general specialty hospitals flowed in from others province or metropolitan cities than other hospital types. 3. The RGI of hospitals holding above 400 beds were significantly lower than others in inpatients and outpatients. 5. The RGI of hospitals were significantly different among sixteen province and metropolitan cities. The RGI inpatients of Gwangju and Daejon metropolitan city were lowest sub-group(0.659, 0.664), and the RGI inpatients of Jeju was revealed as highest, 0.979. 6. Available beds, total doctors, and total employees were negatively correlated with RGI of inpatients and outpatients. 7. The significant influencing factors to RGI of inpatients and outpatients were appeared samely such as available beds, wide healthcare region, hospital size, and foundation type. Conclusions : It is considered that RGI of hospital represent competitive power in healthcare market. Also, the competitive advantage and quality of hospital clustered by characteristics could made out by RGI. Therefore, the results of this study would be useful to develop and evaluate hospital policy of individual hospital or local government.

축산물 작업장에서 젖소 미경산 및 경산우 구별을 위한 비교 항목 평가 (Evaluation of the criteria to distinguish heifer from cow of Holstein cattle in abattoir)

  • 김경호;이정구;라도경;김철완;변재원;이성모
    • 한국동물위생학회지
    • /
    • 제30권1호
    • /
    • pp.145-154
    • /
    • 2007
  • In Korea, it is the one of controversial problems to distinguish heifer from cow in slaughtered Holstein cattle. This study was conducted to evaluate the several criterions which could be used to discriminate heifer from cow. Some criterions have shown significant differences between heifer and cow in ante and post-mortem inspections(p<0.01). Firstly, the numbers of milk teeth of heifer and cow were $6.12{\pm}1.92$ ($Mean{\pm}Standard$ deviation) and $0.03{\pm}0.39$ respectively. The teat diameter(D) and length(L) of cow were $26.43{\pm}4.31mm$ and $47.76{\pm}6.89mm$ respectively. However, those of heifer were significantly smaller (D: $18.04{\pm}5.04mm$, L: $28.61{\pm}8.91mm$) than those of cow. The size of udder was $203.68{\pm}16.84mm$ in Holstein cow and $112.70{\pm}20.59mm$ in heifer. Secondly, the uterus size of cow was significantly bigger than that of heifer and caruncle in mucosa of uterus could be easy to be confirmed by necropsy inspection. It was also obvious that the folding and length of uterus body were significantly remarkable in cow. Lastly, the pelvic cavity was $196.33{\pm}10.01mm$ in heifer and $220.90{\pm}11.41mm$ in cow. The ossifying maturation of heifer was $2.64{\pm}0.82$ and $6.71{\pm}1.81$ in cow. As the results, this study can be helpful for meat inspectors to discriminate the non-delivery heifer from delivery cow in Holstein cattle.

Ni0.5Zn0.4Cu0.1Fe2O4 Complex Ferrite Nanoparticles Synthesized by Chemical Coprecipitation Predicted by Thermodynamic Modeling

  • Kang, Bo-Sun;Park, Joo-Seok;Ahn, Jong-Pil;Kim, Kwang-Hyun;Tae, Ki-Sik;Lee, Hyun-Ju;Kim, Do-Kyung
    • 한국세라믹학회지
    • /
    • 제50권3호
    • /
    • pp.231-237
    • /
    • 2013
  • Thermodynamic modeling of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite system has been adopted as a rational approach to establish routes to better synthesis conditions for pure phase $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ complex ferrite. Quantitative analysis of the different reaction equilibria involved in the precipitation of $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ from aqueous solutions has been used to determine the optimum synthesis conditions. The spinel ferrites, such as magnetite and substitutes for magnetite, with the general formula $MFe_2O_4$, where M= $Fe^{2+}$, $Co^{2+}$, and $Ni^{2+}$ are prepared by coprecipitation of $Fe^{3+}$ and $M^{2+}$ ions with a stoichiometry of $M^{2+}/Fe^{3+}$= 0.5. The average particle size of the as synthesized $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$, measured by transmission electron microscopy (TEM), is 14.2 nm, with a standard deviation of 3.5 nm the size when calculated using X-ray diffraction (XRD) is 16 nm. When $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite is annealed at elevated temperature, larger grains are formed by the necking and mass transport between the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ ferrite nanoparticles. Thus, the grain sizes of the $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ gradually increase as heat treatment temperature increases. Based on the results of Thermogravimetric Analysis (TGA) and Differential Scanning Calorimeter (DSC) analysis, it is found that the hydroxyl groups on the surface of the as synthesized ferrite nanoparticles finally decompose to $Ni_{0.5}Zn_{0.4}Cu_{0.1}Fe_2O_4$ crystal with heat treatment. The results of XRD and TEM confirmed the nanoscale dimensions and spinel structure of the samples.

Effects of Feeding Barley Naturally Contaminated with Fusarium Mycotoxins on Growth Performance, Nutrient Digestibility, and Blood Chemistry of Gilts and Growth Recoveries by Feeding a Non-contaminated Diet

  • Kong, C.;Shin, S.Y.;Park, C.S.;Kim, B.G.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제28권5호
    • /
    • pp.662-670
    • /
    • 2015
  • The objectives of this study were to investigate the effects of feeding barley naturally contaminated with Fusarium mycotoxins on growth performance, vulva swelling, and digestibility of dry matter, organic matter, and crude protein of gilts and the recovery of gilts fed normal diets immediately after the exposure to contaminated diets by measuring growth performance and vulva swelling. In Exp. 1, four diets were prepared to contain 0%, 15%, 30%, or 45% contaminated barley containing 25.7 mg/kg deoxynivalenol and $26.0{\mu}g/kg$ zearalenone. Sixteen gilts with an initial body weight (BW) of 33.3 kg (standard deviation = 3.0) were individually housed in a metabolism crate and assigned to 4 diets with 4 replicates in a randomized complete block design based on BW. During the 14-d feeding trial, individual BW and feed consumption were measured weekly and the vertical and horizontal lengths of vulva were measured every 3 d. From d 10, feces were collected by the maker-to-marker method for 4 d. Blood samples were collected on d 14. During the overall period, the average daily gain, average daily feed intake, and gain:feed of pigs linearly decreased (p<0.01) as the dietary concentration of contaminated barley increased. However, the digestibility of crude protein was linearly increased (p = 0.011) with the increasing amounts of contaminated barley. Increasing dietary Fusarium mycotoxin concentrations did not influence vulva size, blood characteristic as well as immunoglobulin level of pigs. In the Exp. 2, a corn-soybean meal-based diet was formulated as a recovery diet. Pigs were fed the recovery diet immediately after completion of the Exp. 1. During the 14-d of recovery period, the individual BW and feed consumption were measured weekly and the vertical and horizontal length of vulva were measured every 3 d from d 0. On d 7, the feed intake of pigs previously fed contaminated diets already reached that of pigs fed a diet with 0% contaminated barley and no significant difference in growth performance among treatments was observed during d 7 to 14 of the recovery period. In conclusion, increasing levels of mycotoxins in diets linearly decreased the growth performance of pigs, and these damages can be recovered in 7 d after the diet was replaced with a normal diet. The vulva size, blood characteristic, immune responses were not affected by increasing level of contaminated barley in the diets fed to pigs.

기후변화를 고려한 수자원 분야의 취약성 분석 (Vulnerability Analysis of Water Resources Considering Climate Change)

  • 김다은;정용;박무종;윤재영;김상단;최민하
    • 한국습지학회지
    • /
    • 제13권1호
    • /
    • pp.25-33
    • /
    • 2011
  • 인위적, 자연적, 지리적, 시간적 요소 등에 의하여 기후가 변동되는 현상을 '기후변화'라 하며, 이는 수십년 또는 그 이상 지속되는 변동성이 평균적 상태에 대해 통계적으로 중요한 변화라고 정의된다. 이러한 기후변화가 최근 들어 급속하게 진행되어 자연재해가 발생함에 따라 세계는 이 변화의 추이를 예의 주시하고 있다. 특히 수자원 분야의 기후변화에 대한 취약성은 다른 분야에 비해 높을 것으로 평가되며, 이러한 기후변화로 인한 취약성을 예측하고 재해를 방지하는 것은 이 분야에서의 주요 사안이라고 할 수 있겠다. 국내의 수자원 분야 취약성 평가는 아직 미흡하므로, 본 연구에서는 수자원 분야의 전문가들을 대상으로 델파이 기법을 사용하여 우리나라 중소하천의 기후변화 취약성에 대하여 분석하였다. 조사는 총 3차에 걸쳐 실시하였으며 1차에서 총점분석을 이용하여 대리변수를 선정하였고, 1차에서 선택된 대리 변수들은 2 3차에서 항목 별 분석을 하였고, 이를 통하여 전문가 의견을 평가 정리하였다. 전반적으로 전문가 의견은 조사가 진행될수록 편차가 줄어들며 합의가 진전되었다. 추후연구로는 연구대상지역에 대한 직접적인 취약성 평가의 진행이 필요할 것으로 예상된다.

위상 다중화 홀로그래픽 메모리 시스템을 위한 CPC 위상코드의 성능 분석 (Performance Analysis of Complex Phase-code for Phase Multiplexes Holographic Memory System)

  • 조병철;김정진;김은수
    • 한국통신학회논문지
    • /
    • 제28권1C호
    • /
    • pp.1-8
    • /
    • 2003
  • 본 논문에서는 최근 위상 다중화 홀로그래픽 메모리 시스템의 실질적인 구현을 위해 새로이 제시된 CPC(complex phase code)의 성능을 기존의 위상코드인 PR, RCE 및 WHM 등과 비교 분석하였다. 컴퓨터 시뮬레이션에서 어드레스빔은 32$\times$32의 픽셀크기로 고정하였고, 위상코드를 표현하는 상용 공간광변조기의 비선형적 위상변조 특성을 고려하여 0~25%의 에러율을 갖는 위상 코드값를 의도적으로 부과하여 실험을 수행하였다. 또한, CPC 및 PR, RCE, WHM으로 코딩된 각 어드레스빔에 대한 자기상관 및 상호상관 값을 계산함으로써 위상코드간의 영상누화(crosstalk) 및 신호대 잡음비(SNR) 특성을 비교 분석하였다. 실험결과, CPC의 상호상관 결과의 평균값이 0.021, 표준편차값이 0.0113으로 다른 위상코드에 이하여 가장 작게 나타났으며, 신호대 잡음비는 27.4로 가장 높은 것으로 분석되었다. 또한, 32$\times$32의 빔크기를 기준으로 할 때 CPC의 어드레스빔의 개수는 6.344$\times$$10^{49}$ 으로 나타나 기존의 위상 코드에 비해 상대적으로 큰 것으로 분석되었다.

남해 동부 멸치어군의 다중주파수 특성 (The multi-frequency characteristics of anchovy schools in the east of South Sea of South Korea)

  • 박영글;서영일;오택윤;박준성;장충식;강명희
    • 수산해양기술연구
    • /
    • 제51권2호
    • /
    • pp.235-244
    • /
    • 2015
  • The multi-frequency characteristics of anchovy schools were investigated using six acoustic lines collected at 38 and 120 kHz while a primary trawl survey was conducted from 14 April and 18 April of 2014 in off the coast of Tongyeong and Geo-je. Here, the frequency characteristics mean ${\Delta}MVBS$ that is the difference of Mean Volume Backscattering Strength at two frequencies. To use the characteristics effectively, the optimal cell size ($10{\times}2m$) was determined by examining several different cell sizes in consideration with the shapes of fish schools and the ${\Delta}MVBS$ pattern. By examining 6 histograms of ${\Delta}MVBS$, afternoon groups were occupied more in the ${\Delta}MVBS$ range of -6~-4 dB than that of -4~-2 dB, comparing to morning groups. The ${\Delta}MVBS$ range of the morning groups was between -16.9 dB and 11.6 dB, and that of the afternoon groups -16.7 dB and 13.0 dB. The average and standard deviation were $-3.9{\pm}3.6$ dB in the morning and $-4.1{\pm}3.4$ dB in the afternoon, suggesting that morning groups were 2 dB higher than afternoon groups. The ${\Delta}MVBS$ range of all anchovy schools regardless of morning and afternoon was between -16.9 dB and 13.0 dB, their average ${\Delta}MVBS$ was $-4.1{\pm}3.5$ dB. The characteristics can support to identify anchovy species in the waters where multiple fish species are distributed. It is hoped that this study presents the availability and benefit of acoustic data from a primary trawl survey.

PFA 및 MWCNT의 기핵효과에 의한 경질 폴리우레탄 폼의 물성 변화에 대한 연구 (A Study on the Property Changes of Rigid Polyurethane Foams by Nucleating Effects of PFA and MWCNT)

  • 안원술
    • 한국산학기술학회논문지
    • /
    • 제16권4호
    • /
    • pp.2945-2950
    • /
    • 2015
  • 경질 폴리우레탄 폼(RPUF) 제조에서의 단열성 향상을 위하여 사용되는 PFA (Perfluoroalkane)는 액상의 발포 기핵제로서 성능은 뛰어나지만 매우 고가일 뿐만 아니라 불소화합물로서 환경 유해성 물질이다. 따라서 이를 대체할 수 있는 고성능의 대체 기핵제 개발에 대한 많은 연구가 진행되고 있다. 본 연구에서는 이에 대하여 다중벽 탄소나노튜브(MWCNT)를 고상 기핵제로 사용하여 제조한 샘플에서의 셀 크기 및 단열 성능과 기계적 물성에 미치는 영향을 비교 연구하여 보고자 하였다. 셀의 평균크기는 $165.6{\mu}m$에서 $162.9{\mu}m$로 상대적으로 더 작아졌으며, 표준 편차 역시 각각 45.6 및 35.2로서 상대적으로 더 균일한 셀 크기 분포를 가진 것으로 나타났다. k-factor 값 역시 0.01763 및 $0.01745kcal/m.hr.^{\circ}C$의 값으로서 1.02%가 감소된 더 작은 값을 나타내었다. 또한 압축 응력 시험에서의 초기 모듈러스는 상대적으로 더 큰 값을 나타내었으나 압축항복 응력은 약 $0.030{\times}105Pa$로서 거의 같은 값을 나타내었다. 이러한 결과들로 부터 MWCNT는 매우 우수한 기핵제로 작용함을 알 수 있었고, 따라서 소량의 MWCNT를 기핵제로 사용하여 경제적이면서도 우수한 단열효과와 기계적 물성을 지닌 친환경적인 경질 폴리우레탄 폼을 제조할 수 있음을 알 수 있었다.