• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.705-713
• /
• 2011

In this paper, we introduce two techniques for resolving integer ambiguities between reference stations, which is one of the most important processes in Network RTK correction generation process. Each techniques uses Hatch filter and combination of L1/L2 measurements and we used simulation data and real data to evaluate performance of the techniques. For evaluating performance of each technique, we compared corrections generated from user site and Network RTK. As a result, Network RTK with the technique which uses Hatch filter improves user performance much more than single baseline RTK does. Residual of user is smaller than a half size of wavelength so it does not affect user integer ambiguity resolution, however, it contains significant bias error. On the other hand, when we used the technique which uses combination of L1/L2 measurements, residual error of user is largely reduced compared to the technique using Hatch filter.

• Journal of Oriental Neuropsychiatry
• /
• v.31 no.4
• /
• pp.301-314
• /
• 2020

Objectives: The purpose of this study was to provide clinical evidence to support the use of herbal medicine combined with western medicine for BPSD. Methods: Studies were identified by searching CNKI, Pubmed, EMBASE, Cochrane Library, SCIENCEON, RISS, KMbase, KISS, OASIS. Literature searches of Chinese, English, and Korean databases were performed. Two authors independently extracted the data and evaluated the quality of each study. Results: The literature search identified 203 articles. Of these, 7 were selected for the analysis. The risk of bias in most studies was unclear. The most frequently used diagnostic tools were the NINCDS-ADRDA and DSM-IV. The most commonly used results indicator was NPI. In 6 of the 7 papers, combination treatment (herbal & Western medicine) was statistically significantly more effective than single treatment (Western medicine alone) for BPSD. No significant adverse events were reported. Conclusions: Herbal medicine in combination with Western medicine is more effective for treating BPSD than Western medicine alone. However, the quality of the studies used in this study was uncertain and the sample size was too small. Based on the findings of this study, more high-quality clinical trials are needed to confirm the efficacy of combination treatment.

• Imaging Science in Dentistry
• /
• v.54 no.3
• /
• pp.289-295
• /
• 2024

Purpose: This study examined the influence of metal artifact reduction (MAR), the application of sharpening filters, and their combination on the diagnosis of horizontal root fracture (HRF) in teeth adjacent to a zirconia implant on cone-beam computed tomography (CBCT) examinations. Materials and Methods: Nineteen single-rooted teeth (9 with HRF and 10 without) were individually positioned in the right central incisor socket of a dry human maxilla. A zirconia implant was placed adjacent to each tooth. Imaging was performed using an OP300 Maxio CBCT (Instrumentarium, Tuusula, Finland) unit with the following settings: a current of 8 mA, both MAR modes(enabled and disabled), a 5×5 cm field of view, a voxel size of 0.085 mm, and a peak kilovoltage of 90 kVp. Four oral and maxillofacial radiologists independently evaluated the CBCT scans under both MAR conditions and across 3 levels of sharpening filter application (none, Sharpen 1×, and Sharpen 2×). Diagnostic metrics were calculated and compared using 2-way analysis of variance (α=5%). The weighted kappa test was used to assess intra- and inter-examiner reliability in the diagnosis of HRF. Results: MAR tool activation, sharpening filter use, and their combination did not significantly impact the area under the receiver operating characteristic curve, sensitivity, or specificity of HRF diagnosis (P>0.05). Intra- and inter-examiner agreement ranged from fair to substantial. Conclusion: The diagnosis of HRF in a tooth adjacent to a zirconia implant is not affected by the activation of MAR, the application of a sharpening filter, or the combination of these tools.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.410-416
• /
• 2004

The objective of this investigation was to evaluate applicability of precoat filtration that can be substituted for rapid sand filter of conventional water treatment system(CWTS). Precoat filter used in this experiment are candle filter. Element disk of candle are pore size $10{\mu}m(R),\;20{\mu}m(B)$ And diatomaceous earth are cake pore size $3.5{\mu}m$(Standard Super- Cel; A), $7{\mu}m$(Hyflo Super-Cel; B) and $17{\mu}m$(Celite 545RV; C). $2kg/m^2$ diatomaceous earth is used for precoating, it coated candle in $5{\sim}6mm$ thickness. 1. Al adsorption dosages by diatomaceous earth used in experimental we Hyflo Super-Cel 0.843mg/g, Standard Super-Cel 0.782 mg/g and Celite 545RV 0.766 mg/g. 2. Filtrate of precoat filter during 60min are R-C combination 20.7($m^3/m^2$)>B-C 18.3($m^3/m^2$)>B-B 15.0($m^3/m^2$)> R-B 12.9($m^3/m^2$)> R-A 11,093($l/m^2$). 3. Water quality of precoat filter effluent are thus. $KMnO_4$ consumption are $1.10{\sim}2.20mg/l$, removal rate are $30.9{\sim}65.6\%$. They are R-A 1.10(mg/l)(removal rate $65.6\%$). R-C(2.20 mg/l)(removal rate $30.9\%$). 4. $Al^{3+}$ are not detected with all combination, removal rate $100\%$. 5. Considering water quality and flux, continued running time of R-A combination is 7 hr. Accumulated filtrate are $74.4 m^3/m^2$, average flux is $177.2 l/m^2{\cdot}min$. And filtrate per diatomaceous earth 1g are 37.2 l. 6. R-A effluent's water quality are $KMnO_4$ Consumption 1.10(mg/l), DOC 1.161 mg/1, Al 0.0 mg/1, $UV_{254}$ 0.016/cm, Turbidity 0.1(NTU). R-A combination is suitable to precoat filtration for the settling basin effluent treatment.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.384-394
• /
• 2004

This study was carried out to monitor the response of ovaries and cyst according to treatment with GnRH or combination of GnRH and $PGF_2{\alpha}$ in dairy cows with ovarian follicular cysts. Thirty cows were diagnosed as having follicular cysts by rectal palpation, ultrasonography and progesterone (P4) assays. Ten cows were treated with GnRH (control), and the other twenty were treated with $PGF_2{\alpha}$ at 10 days after GnRH treatment. All the animals were re-examined by ultrasonography and blood was collected for the measurement of plasma P4 concentration at day 0 (the day of treatment), day 7, day 10, day 13, day 24 and day 34, respectively. In 30 cows that were diagnosed with follicular cysts, mean plasma P 4 concentrations on day -II and day -I were 0.3 ng/ml and 0.4 ng/ml. On day 10 increased as 2.7$\pm$0.2 ng/ml. Mean cystic wall thickness by ultrasonography on day -11 and day -I were 2.1 mm and 2.2 mm. In 9 cows responded on luteinization of cystic wall, cystic wall thickness was 3.9$\pm$0.5 mm at day 10 after GnRH treatment. The responses of ovaries until day 10 after GnRH treatment included development of corpus luteum in the ovary bearing the cyst or in the contralateral ovary (12 cows), luteinization of cystic wall (6 cows) and clouding of the anechoic antrum of cysts (2 cows). The ovarian responses according to the combination of GnRH and $PGF_2{\alpha}$ included regression of the corpus luteum (12 cows), increase (1 cow) and no change (1 cow) of cyst size until last examination, and complete disappearance on day 13 (6 cows), 23 (6 cows) and 34 (4 cows). Combination treatment group of GnRH and $PGF_2{\alpha}$ showed a higher pregnancy rate within 100 days after initial treatment (40.0 vs 65.0%) and shorter intervals from the treatment to conception (45.4$\pm$25.8 vs 53.5$\pm$31.4 days) compared with control. It was concluded that the administration of $PGF_2{\alpha}$ following GnRH treatment is effective in shortening the interval from treatment to conception in cows with follicular cyst. Also, this study suggested that the response of the cyst according to treatment revealed various types. Therefore, veterinarians should pay attention to monitor of the response of cystic ovaries after treatment, specially no change, slowly decrease or increasement of cyst size after treatment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.1044-1052
• /
• 2015

The aim of this modelling study was to investigate the effect of large herd size (and land areas) on walking distances and milking interval (MI), and their impact on milk yield and economic penalties when 50% of the total diets were provided from home grown feed either as pasture or grazeable complementary forage rotation (CFR) in an automatic milking system (AMS). Twelve scenarios consisting of 3 AMS herds (400, 600, 800 cows), 2 levels of pasture utilisation (current AMS utilisation of 15.0 t dry matter [DM]/ha, termed as 'moderate'; optimum pasture utilisation of 19.7 t DM/ha, termed as 'high') and 2 rates of incorporation of grazeable complementary forage system (CFS: 0, 30%; CFS = 65% farm is CFR and 35% of farm is pasture) were investigated. Walking distances, energy loss due to walking, MI, reduction in milk yield and income loss were calculated for each treatment based on information available in the literature. With moderate pasture utilisation and 0% CFR, increasing the herd size from 400 to 800 cows resulted in an increase in total walking distances between the parlour and the paddock from 3.5 to 6.3 km. Consequently, MI increased from 15.2 to 16.4 h with increased herd size from 400 to 800 cows. High pasture utilisation (allowing for an increased stocking density) reduced the total walking distances up to 1 km, thus reduced the MI by up to 0.5 h compared to the moderate pasture, 800 cow herd combination. The high pasture utilisation combined with 30% of the farm in CFR in the farm reduced the total walking distances by up to 1.7 km and MI by up to 0.8 h compared to the moderate pasture and 800 cow herd combination. For moderate pasture utilisation, increasing the herd size from 400 to 800 cows resulted in more dramatic milk yield penalty as yield increasing from c.f. 2.6 and 5.1 kg/cow/d respectively, which incurred a loss of up to $AU 1.9/cow/d. Milk yield losses of 0.61 kg and 0.25 kg for every km increase in total walking distance (voluntary return trip from parlour to paddock) and every one hour increase in MI, respectively. The high pasture utilisation combined with 30% of the farm in CFR in the farm increased milk yield by up to 1.5 kg/cow/d, thereby reducing loss by up to $0.5/cow/d (c.f. the moderate pasture and 800 cow herd scenario). Thus, it was concluded that the successful integration of grazeable CFS with pasture has the potential to improve financial performance compared to the pasture only, large herd, AMS.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.350-355
• /
• 1994

This study is aimed at the experimental investigation of the influence of the structural parameters such as concrete cover, width of specimen and bar size on the dowel action of reinforcing bari in high strength concrete members. Based on the proper combination of these parameter, a total of 46 specimens has been cast for fc'= 500 ㎏/㎠ and another 46 specimens for fc'= 700 ㎏/㎠, and cured at the laboratory. Comparative analyses have been made for the parametric contribution to the dowel strength from the test results, and a regress equation has been suggested.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.336-340
• /
• 2001

Theoretical efforts were taken to investigate an optimum heat treatment process in martensitic stainlesssteel. The approach is based on the combination of the interpolation and extrapolation method of a standard heat treatment technology with the principle of quenching and tempering temperature difference. The relationship of macroscopic structure and fracture toughness and ductility as well as the Hardness and strength has been focused to induce a simple rule to apply with feasibility. As a result it was found that the grain size influences to the fracture toughness and ductility significantly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.651-654
• /
• 2006

The inline manufacturing equipment using a combination of the belt source and LPS source which is innovatively designed is introduced for the largesize AMOLED. The features of the inline system include 60sec TACT time, 19 numbers of chambers, non-substrate bending and easy application to very thin TFT substrates for the $4^{th}$ - $8^{th}$ Generation AMOLEDs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.707-712
• /
• 1991

In machining a part in CAD/CAM system, it is required that the drawing information should be automatically generated, modified, deleted, and thus be used as an general information throughout the entire manufacturing process. This research addresses basic entities(point, line, circle, arc) for design feature and combination of this features, based on GT concepts, with minimum user's manual input. This paper deals with the generalization of operating system which can cover the s parts which appears in mechanical part handbook and the basic constitutional part of sold base. The system developed shows a strong application impact on automatic process planning system of medium - size injection sold companies.