• 한국표면공학회지
• /
• 제28권2호
• /
• pp.92-100
• /
• 1995

To increase the capacity of positive electrode materials for matching the high capacity negative electrode materials in alkaline rechargeable batteries, high-density nickel hydroxide powders were made through a continuous process from nickel sulfate reacted with ammonia and sodium hydroxidc. The effect of operating conditions on structure, shape, size distribution, apparent density and tap density of powders were investigated. Crystal structure of nickel hydroxide powder was hcp according to Bravais Lattice. The increase of mean residence time promoted the growth of (101) plane. The shape of powder was nearly spherical. Their size was in the range of $2~50\mu\textrm{m}$. The size distribution of the powders prepared was narrower than that of commercially obtained nickel hydroxide. Apparent density and tap density were 1.6~1.7g/cc and 2.0~2.1g/cc, respectively.

• Journal of International Society for Simulation Surgery
• /
• 제4권1호
• /
• pp.1-8
• /
• 2017

In the field of tissue engineering, researches have been actively conducted to regulate stem cell fate by understanding the interaction between cell and materials. This approach is expected as a promising therapeutic method in the future medicine by utilizing differentiation of stem cells into desired cells or tissues using biomaterial. For this regenerative medicine, there exist lots of attempts to construct optimized structures of various shapes and sizes that can regulate the stem cell fate. In this review, we will empathize the topographic effect as stem cell niche on the mesenchymal stem cell (MSC) response (cell attachment, proliferation, and differentiation) according to the shape and size of the structure of the substrates, and comprehensively analyze the importance and the effect of shape and size of the surface topography.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.366-370
• /
• 1995

The ballistic efficiency of alumina tiles with various sizes, shapes, and target configurations was measured by the thick backing plate technique. The ballistic efficiency of square tiles roughly 8 mm thick struck by 12.7mm diameter bullets rapidly increased with tile size up to about 100mm, then tended to saturate. Circular shape tiles had lower ballistic efficiencies than those of square shape tiles for the same width and thickness. Small tiles (50mm) that were recessed in aluminum wells had a significantly higher ballistic efficiency than tiles placed on a flat surface. However, the difference in the ballistic efficiency between the two target configurtions became small at larger tile sizes. All the results could be explained by the effect of reflected waves at edges and the propagation of resulting cracks on the penetration process.

• 콘크리트학회논문집
• /
• 제16권3호
• /
• pp.375-382
• /
• 2004

콘크리트의 압축강도는 콘크리트 구조물의 설계 시에 재료상수로 사용되는데 이 값의 산정에 사용되는 공시체의 크기 및 형상이 각 나라마다 다르므로 현재까지도 문제가 되고 있다. 본 연구에서는 콘크리트 공시체의 압축강도에 공시체의 크기와 형상이 미치는 영향을 파괴역학적 이론과 실험을 통하여 검토하였다. 콘크리트의 두 가지 파괴모드 중의 하나인 모드 I에 대한 실험이 원주공시체, 입방체, 그리고 각주를 이용하여 수행되었다 먼저 원주공시체, 입방체와 각주 자체의 크기효과와 이들 사이의 형상효과를 살펴본 후, 공시체의 크기, 형상, 및 타설방향에 대한 압축강도의 상호관계에 대하여 검토하였다. 또한, 입방체와 각주에 대하여 타설방향이 압축강도에 미치는 영향을 검토하였다.

• 대한기계학회논문집A
• /
• 제37권12호
• /
• pp.1453-1463
• /
• 2013

본 연구에서는 유한요소해석과 압입시험으로 압입자 형상이 압입균열특성에 미치는 영향을 조사했다. 본 논문에서는 Lee 등(2012)이 제시한 cohesive zone 모델특성 및 균열생성, 진전을 위한 해석조건에 기초해 다양한 균열해석을 수행했다. 우선, 사각뿔 및 삼각뿔 압입균열 시험과 해석을 비교해 해석모델의 유효성을 검증했다. 아울러 비대칭 압입자에 의한 압입시, 압입하부에서 비대칭 균열의 발생여부를 해석적으로 관찰했다. 최종적으로 압입발생 균열수와 균열길이 관계를 조사했다. 균열수와 균열길이 관계 및 동일 압입자형상(압입자 모서리수)에서 압입자각에 따른 균열길이 변화를 이용하면, 특정 압입자 형태의 압입시험에서 얻은 균열길이 만으로 다양한 압입자 형태의 균열길이를 예측할 수 있다.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.21-28
• /
• 1985

The properties of magnetic recording materials largely depend on their shape magnetic anisotropy. The control of their shape and size distribution is very important for improving magnetic properties. The silica-coated goethite$(SiO_2$/$\alpha$-FeOOH=1.5wt%) having acicular shape was prepared. The sillica-coated goethite was heat-treated at 40$0^{\circ}C$~1,00$0^{\circ}C$ 1hr and then reduced at 50$0^{\circ}C$ 2hr. When the silica-coated goethite was heat-treated at 80$0^{\circ}C$ its acicular shape was maintained and its magnetic properties were improved(Hc: 1,325 Oe $\sigma$m:138.8 emu/g, Rs:0.56) However the acicular shape of the paricles was broken for non-coated hematite obtained by dehydration at 80$0^{\circ}C$ They were sintered and showed poor magnetic properties.

• 한국항공우주학회지
• /
• 제36권8호
• /
• pp.790-796
• /
• 2008

고체 추진기관은 고정된 추진제 그레인 형상과 노즐목 때문에 정해진 단순 추력을 가지게 된다. 핀틀 노즐은 기존의 고체 추진기관의 장점을 가지면서도 추력 조절이 불가능한 단점을 보완하기 위해 제안된 방법이다. 본 연구에서는 핀틀 형상이 노즐 성능에 미치는 영향을 실험과 수치해석 방법으로 평가하였다. 핀틀 형상은 단순성의 원리에 근거하여 변경하였으며 각각의 형상에 대한 내부 유동장은 난류모델을 적용하여 Fluent로 해석하였다. 본 연구로부터 핀틀 형상이 노즐내의 충격파 구조 및 유동박리 영향을 주어 노즐 추력 및 핀틀 하중에 영향을 미침과 최적의 노즐 성능을 발휘할 수 있는 핀틀 형상이 존재함을 확인하였다.

• 한국가정과학회지
• /
• 제1권2호
• /
• pp.113-118
• /
• 1998

Clothing shape is principally described in seven factors that are composed of clothing design, clothing material, clothing size, pattern design, sewing method and body motion etc.. The aims of this study was to measurement out-line space-shape variation of clothing fitness with somato type by using the image processing. The subjects for direct anthropometric measurements were 248 female college students aged from 19 to 22. The data were statistically analyzed by principal analysis and cluster analysis. The results were obtained three somato type. Also I made skirts in order to analyzed to the out-line space-shape variation of clothing fitness with body. The effect of somato type on the shape of flare skirts was determined by the out-line space-shape variation of clothing fitness with body. The out-line space-shape variation of clothing fitness with body was observed between the node number and amplitudes of clothing wave form and node number was determined at the maxim of space-shape amplitude, and the space-shape amplitudes have related with aspect ratio of cross-sectional shape. Results for flare skirts show changes in amplitude and mean with fabrics, somato type. therefore gray-level histogram are correlated with changes out-line space-shape, differences in drape spacing and related fabric properties and their somato type. (Korean J Human Ecology 1(2):113∼110 1998)

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.130-135
• /
• 2010

Sm-16.7wt%Co alloy powders were prepared by high energy ball milling under the conditions of various milling time and the content of process control agent (PCA), and their microstructure and magnetic properties were investigated to establish optimum processing conditions. The initial powders employed showed irregular shape and had a size ranging from 5 to $110\;{\mu}m$. After milling for 5 h, the shape of powders changed to round shape and their mean powder size was approximately $5\;{\mu}m$, which consisted of the agglomerated nano-sized particles with 15 nm in diameter. The coercivity was reduced with increasing the milling time, whereas the saturation magnetization increased. As the content of PCA increased, the powder size minutely decreased to approximately $7\;{\mu}m$ at the PCA content of 10 wt%. The XRD patterns showed that the main diffraction peaks disappeared apparently after milling, indicating the formation of amorphous structure. The measured values of coercivity were almost unchanged with increasing the content of PCA.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.28-34
• /
• 2022

The flow at the top surface of the hopper is of particular industrial interest. Previously, the velocity distribution inside the hopper was predicted using the simple, void and spot models, which are equations for the particle flow field. However, because these equations cannot predict the velocity distribution at the top surface, a new equation has been recently proposed. This study employed the discrete element method with the changed shape of the particles. Based on the results, the shape of the particle had no effect on the discharge angle and shape of the velocity distribution; however, it greatly affected the size of the velocity distribution and bed thickness of the flowing particles. Therefore, in the future, it is necessary to modify the theoretical equation by considering the shape of the particles.