• Computers and Concrete
• /
• 제22권5호
• /
• pp.469-479
• /
• 2018

The Brazilian tensile strength of concrete samples is a key parameter in fracture mechanics since it may significantly change the quality of concrete materials and their mechanical behaviors. It is well known that porosity is one of the most often used physical indices to predict concrete mechanical properties. In the present work the influence of porosity shape on concrete tensile strength characteristics is studied, using a bonded particle model. Firstly numerical model was calibrated by Brazilian experimental results and uniaxial test out puts. Secondly, Brazilian models consisting various pore shapes were simulated and numerically tested at a constant speed of 0.016 mm/s. The results show that pore shape has important effects on the failure pattern. It is shown that the pore shape may play an important role in the cracks initiation and propagation during the loading process which in turn influence on the tensile strength of the concrete samples. It has also been shown that the pore size mainly affects the ratio of uniaxial compressive strength to that of the tensile one in the simulated material samples.

• 한국재료학회지
• /
• 제17권1호
• /
• pp.50-55
• /
• 2007

Ultra-fine Copper powder for a conductive paste in electric-electronic field have been synthesized by chemical reduction of aqueous $CuSO_4$ with hydrazine hydrate $(N_2H_4{\cdot}H_2O)$ as a reductor. The effect of reaction conditions such as dispersant and reaction temperature on the particle size and shape for the prepared Cu powders was investigated by means of XRD, SEM, TEM and TGA. Experiments showed that type of dispersant and reaction temperature were affected on the particle size and morphology of the copper powder. When the carboxymethyl cellulose (CMC) was added as a dispersant the relative mono-dispersed and spherical Cu powder was obtained. Cu powders with particle size of approximately 140nm and narrow particle size distribution were obtained from 0.3M $CuSO_4$ with adding of 0.03M CMC and 40ml $N_2H_4{\cdot}H_2O$ at a reaction temperature of $70^{\circ}C$.

• 한국재료학회지
• /
• 제14권10호
• /
• pp.725-730
• /
• 2004

Nickel ultrafine powder have been synthesized by chemical reduction of aqueous $NiSO_4$ with hydrazine at various reaction conditions. The effect of reaction conditions such as the amount of surfactant and reductor, and reaction temperature on the particle size and shape was investigated by the mean of XRD, SEM and SEM-PSA. Experiments showed that the ratio of $N_{2}H_4/Ni$ and the reaction temperature were affected on the particle size of the nickel powder. The average particle size of synthesized nickel powder increased with increasing reaction temperature regardless of the ratio of $N_{2}H_4/Ni$. Also the surfactant could influence the size and agglomeration of ultrafine powder with the reaction temperature.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.69-75
• /
• 2005

고온자전연소법에 의한 질화알루미늄 합성에 있어서, 반응물(Al) 형상과 희석제(AlN) 입도 등의 형상학적 조건이 반응생성물에 미치는 영향을 조사하였다. 평균 입경(34$\mu$m)이 같은 두 종류의 Al 분말(입상, 편상)과 평균입경이 다른 4종류의 AM분말을 희석제로 사웅하여 반응 성형체를 준비하였다. 반응성형체의 충진밀도는 이론밀도의 $35\%로 고정하였고, 초기 질소압은 $1\~10MPa$, 희석을은 $0.4\~0.7$로 변화시키면서 반응을 실시하였다. 반응물과 희석제의 입도를 비슷하게 조절함으로써, 상대적으로 질소압이 낮은 1MPa의 조건에서도 순도 $98\% 이상, 입경 수십 $\mu$m의 AlN 합성이 가능함을 확인하였다. 이러한 고순도, 고입경화는 연소파 진행 후, 성형체 내부로 질소가스 투입 용이성의 차이에 의한 현상이라고 판단된다.

• 한국의류학회지
• /
• 제34권2호
• /
• pp.189-199
• /
• 2010

This study develops a coverall design for the body shape and movement of infants. This research analyzed these processes: 1. The current coverall styles preferred for infants. 2. The appropriate products for the real size, body shape, movement, and fit of infants. 3. The observations of the 6 months to 9 months movement and development of infants. 4. The design and creation of a new coverall base in this study, and to check the suitable test the developed coverall design for the infant. The result of this study are: A coverall for infants that lie or crawl on the floor must avoid opening in the center front and a gore has to be added at the crotch of the pants for the better movement of infants. These ways provide infants a neat appearance and easy movement. The test of developed designs shows that the developed coverall design covers the size gap of the trunk loop according to the growth of the infant and the movement of the legs; in addition it provides a positive aesthetic effect. The waistline in the developed coverall (a waistline that should exist lower than the body waistline of the infant) can reduce seam stress because the pressure of the seam line can be absorbed in a dipper. It is one of the suitable design points for infants lying prone all day long in this study.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권2호
• /
• pp.13-23
• /
• 2017

본 연구는 사각형 콘크리트 압축부재를 CFRP 쉬트로 감쌌을 때의 보강효과와 거동 특성에 대한 연구로, CFRP 쉬트로 보강한 경우 쉬트의 구속효과에 의하여 압축내력이 향상되었으나 사각형 단면이므로 원형단면보다 구속효과는 작게 나타났다. 보강효과와 거동특성을 확인하기 위하여 CFRP 쉬트의 보강겹수, 시험체의 크기, 형상비, 모따기, 및 단면 개량을 변수로 선정하여 실험을 계획하였다. 11개의 실험변수별로 각각 5개씩, 총 55개의 실험체를 제작하여 실험하였다. 압축시험결과 CFRP 쉬트의 구속에 의해 보강효과가 나타났으나 실험체의 크기가 증가함에 따라 구속효과는 떨어졌다. 반면에 CFRP 쉬트의 구속효과에 의하여 사각형 콘크리트 기둥의 연성은 매우 크게 증가되었다. 단면형상을 사각형에서 원형으로 변형한 경우 압축강도와 연성 모두 증가되었다. 또한 실험결과와 기존연구결과를 사용하여 CFRP로 구속된 사각형 콘크리트 부재에 대한 기존 강도추정식의 정확성과 신뢰성을 검증하였다.

• 한국재료학회지
• /
• 제15권11호
• /
• pp.717-721
• /
• 2005

Silica powders were synthesized using emulsion solution containing water, nonionic surfactant of Triton N-57, and cyclohexane. Silica powders were prepared at low cost using inexpensive starting material of sodium silicate and ammonium sulfate. Morphology, size and size distribution were observed and determined using SEM. The powder was identified as silica by FT-IR and XRD analysis. Particle size and size distributions were affected by concentration of reactants, reaction time, and concentration of surfactant. Particle size were increased with increasing concentration of reactants and particles became dense with increasing reaction time. As R value increased, tile particle size was increased, reached a certain value and then decreased again. The silica powders synthesized under optimum condition were spherical in shape, $0.8{\mu}m$ in average particle size, narrow in particles size distribution, and well dispersed.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.783-790
• /
• 1998

The characterization of the complexation reaction of PVA and Al(III) ion at different pH and the sint-ering behaviour of UO2 containing the PVA-Al(III) complexes were investigated. Compared with pure PVA powder the complexed PVA-Al(III) powder had compacter shape and lower decomposition temperature The major phase of PVA-Al(III) complex decomposed at 90$0^{\circ}C$ was $\alpha$-Al2O3 The PVA-Al(III) complex formed at pH 9 had the lowest relative viscosity the highest Al content of 36% and the smallest particle size of 19${\mu}{\textrm}{m}$ While the pure UO2 pellet appeared with bimodal one. The grain size of the pure UO2 pellet was 7${\mu}{\textrm}{m}$ but that of the PVA-Al(III) complex added UO2 pellet was increased up to 36${\mu}{\textrm}{m}$ The largest grain size was ob-tained when the PVA-Al(III) complex formed at pH9 was added and the PVA-Al(III) complex formed at pH 11 had the greatest effect on increasing pore size.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.1045-1055
• /
• 2017

Tensile strength is considered key properties for characterizing rock material in engineering project. It is determined by direct and indirect methods. Point load test is a useful testing method to estimate the tensile strengths of rocks. In this paper, the effects of rock shape on the point load index of gypsum are investigated by PFC2D simulation. For PFC simulating, initially calibration of PFC was performed with respect to the Brazilian experimental data to ensure the conformity of the simulated numerical models response. In second step, nineteen models with different shape were prepared and tested under point load test. According to the obtained results, as the size of the models increases, the point load strength index increases. It is also found that the shape of particles has no major effect on its tensile strength. Our findings show that the dominant failure pattern for numerical models is breaking the model into two pieces. Also a criterion was rendered numerically for determination of tensile strength of gypsum. The proposed criteria were cross checked with the results of experimental point load test.

• Journal of Information Technology Applications and Management
• /
• 제20권2호
• /
• pp.15-37
• /
• 2013

In this study, the validity of CRM introductory is defined as a driving force for the introduction of technology and concepts such as competence factors of CRM. Effect on the ability to verify the information technology CRM using this concept, we examined the effect of force CRM information technology has on the outcome from the point of view of the customer interaction. And we have tested the moderate effect for size of the company and the industry shape to the relationship between the adequacy and implementation of CRM. As a result, technical adequacy and competence of CRM implementation CRM, has a significant causal relationship to CRM information technology capability. Competence of CRM implementation has a causal relationship with care for the outcome of the interaction of the customer, shows the validity of the introduction of CRM companies are seeking Modulatory effect was verified using the company's size and industry classification, was significant only for the classification of industries. This result shows that must find ways to introduce the CRM industry depending on the form of different.