References
- Al-Salloum, Y. A. (2007). Influence of Edge Sharpness on the Strength of Square Concrete Columns Confined with FRP Composite Laminates, Composites Part B: Engineering, 38(5), 640-650. https://doi.org/10.1016/j.compositesb.2006.06.019
- American Concrete Institute(ACI) (2008). Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, Reported by ACI Committee 440.
- Benzaid, R., and Mesbah, H. (2013), Circular and Square Concrete Columns Externally Confined by CFRP Composite: Experimental Investigation and Effective Strength Models, Fiber Reinforced Polymers-The Technology Applied for Concrete Repair, InTech, 167-201.
- Bulavs, F., Radinsh, I., and Tirans, N. (2005), Improvement of capacity in bending by the use of FRP layers on RC beams, Journal of Civil Engineering and Management, 11(3), 169-174. https://doi.org/10.1080/13923730.2005.9636347
- Campione, G., and Miraglia, N. (2003), Strength and Strain Capacities of Concrete Compression Members Reinforced with FRP, Cement & Concrete Composites, 25(1), 31-41. https://doi.org/10.1016/S0958-9465(01)00048-8
- Demer, M., and Neale, K. W. (1994), Strengthening of Concrete Columns with Unidirectional Composite Sheets, 4th International Conference on Short and Medium Span Bridges, Canadian Society for Civil Engineering, 895-905.
- Fam, A. Z., and Rizkalla, S. H. (2001), Confinement Model for Axially Loaded Concrete Confined by Circular Fiber-reinforced Polymer Tubes, ACI Structural Journal, 98(4), 451-461.
- Harajli, M. H., Hantouche E., and Soudki, K. (2006), Stress-Strain Model for Fiber-Reinforced Polymer Jacketed Concrete Columns, Structural Journal, 103(5), ACI, 672-682.
- Ilki, A., and Kumbasar, N. (2003). Compressive Behaviour of Carbon Fibre Composite Jacketed Concrete with Circular and Non-circular Cross-sections, Journal of earthquake Engineering, 7(3), 381-406. https://doi.org/10.1080/13632460309350455
- Kaminski, M., and Trapko, T. (2006), Experimental Behaviour of Reinforced Concrete Column Models Strengthened by CFRP Materials, Journal of Civil Engineering and Management, 12(2), 109-115.
- Koh, K. M. (2006), Strengthening Effect and Failure Mode of Rectangular Concrete Column Confined with CFRP Sheet, Ph.M. Dissertation, Jeju National University, (In Korean).
- Lam, L., and Teng, J.G. (2003). Design-oriented Stress-strain Model for FRP-confined Concrete in Rectangular Columns, Journal of Reinforced Plastics and Composites, 22(13), 1149-1186. https://doi.org/10.1177/0731684403035429
- Masia, M. J., Gale, T. N., and Shrive, N. G. (2004), Size Effects in Axially Loaded Squaresection Concrete Prisms Strengthened Using Carbon Fibre Reinforced Polymer Wrapping, Canadian Journal of Civil Engineering, 31(1), 1-13. https://doi.org/10.1139/l03-064
- Mirmiran, A., Zagers, K., and Yuan, W. (2000), Nonlinear Finite Element Modeling of Concrete Confined by Fiber Composites, Finite Element in Analysis and Design, 35(1), 79-96. https://doi.org/10.1016/S0168-874X(99)00056-6
- Modarelli, R., Micelli, F., and Monni, O. (2005), FRP-Confinement of Hollow Concrete Cylinders and Prisms, 7th International Symposium FRP Reinforcement for Concrete Structures, American Concrete Institute, 2, 1029-1046.
- Moon, K. T., Park, S. Y., and Kim, M. K. (2015), Strengthening Effect of Axial Circular Concrete Members Wrapped by CFRP sheet, Journal of the Korea Institute for Structural Maintenance and Inspection, 19(5), 10-21. https://doi.org/10.11112/jksmi.2015.19.5.010
- National strandard of the People's Republic of China (2006). Design Code for Strengthening Concrete Structure(GB50367-2006), China Architecture & Building press.
- Park, Y. J. (2001), The Experimental Research on the Confinement Effect of Concrete Specimens with Carbon Fiber Sheet, Ph.M. Dissertation, Korea University, (In Korean).
- Rochette, P. (1996), Confinement de Colonnes Courtes en Beton de Section Carree ou Rectangulaire avec des Materiaux Composites, Maitrise Es-Sciences Appliquees, Universite de Sherbrooke, Canada, (In French).
- Rochette, P., and Labossiere, P. (2000), Axial Testing of Rectangular Column Models Confined with Composites, Journal of Composites for Constructtion, ASCE, 4(3), 129-136. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(129)
- Rousakis, T. C., Karabinis, A. I., and Kiousis, P. D. (2007), FRP-Confined Concrete Members: Axial Compression Experiments and Plasticity Modelling, Engineering Structures, 29(7), 1343-1353. https://doi.org/10.1016/j.engstruct.2006.08.006
- Sadeghian P., Rahai A. R., and Ehsani M. R. (2008), Numerical Modeling of Concrete Cylinders Confined with CFRP Composites, Journal of Reinforced Plastics and Composites, .27(12), 1309-1321. https://doi.org/10.1177/0731684407084212
- Shegata, I. A .E. M., Carneiro, L. A. V., and Shegata, L. C. D. (2002), Strength of Short Concrete Columns Confined with CFRP sheets, Materials and Structures, 35(1), 50-58. https://doi.org/10.1007/BF02482090
- Shin, Y. S., Hong, Y. K., Hong, G. S., and Choi, O. C. (1996), Compressive Strength of Concrete Cube Confined with Carbon Fiber Sheets, Journal of the Architectural Institute of Korea-Structure&Construction, 12(12) AIK, 197-203.
- Tao, Z., Yu, Q., and Zhong, Y.Z. (2008), Compressive Behaviour of CFRP-confined Rectangular Concrete Columns, Magazine of Concrete Research, 60(10), 735-745. https://doi.org/10.1680/macr.2007.00115
- Wang, L. M., and Wu, Y. F. (2008), Effect of Corner Radius on the Performance of CFRP Confined Square Concrete Columns: Test, Engineering Sturctures, 30(2), 493-505. https://doi.org/10.1016/j.engstruct.2007.04.016
- Wu, Y. F. and Wei, Y. Y. (2010), Effect of Cross-sectional Aspect Ratio on the Strength of CFRP-confined Rectangular Concrete Columns, Engineering Structures, 32(1), 32-45. https://doi.org/10.1016/j.engstruct.2009.08.012
- Yeh, F., and Chang, K. (2004), Size and Shape Effect on FRP Confinements for Rectangular Concrete Columns, 13th World Conference on Earthquake Engineering, Vancouver, B. C., Canada, paper no.657.
Cited by
- BFRP 보강이 직사각형 단면 철근콘크리트 기둥의 지진거동에 미치는 영향 vol.24, pp.6, 2017, https://doi.org/10.11112/jksmi.2020.24.6.153