• 농촌지도와개발
• /
• 제24권1호
• /
• pp.1-8
• /
• 2017

The Purpose of this study is to predict farm size per farming household in Chungcheongnam-province by using the Markov chains and Quadratic Programming.. The results are as follows; First, small-scale farms with less than 1.0ha of land are predicted to be still more than half (of total farming households) in 2025 as well. Second, large-scale farms with 3.0ha-5.0ha land and extra large-scale farms with over 5.0ha of land are predicted to gradually expand their proportion in total farm scale. Third, middle-scale farms with 1.0ha-3.0ha land are forecasted to be reduced in their relative proportion. It is required to take into account regional characteristics to improve the effectiveness of a rice industry policy. Therefore, this study has some significance in attempting to research on the ownership structure of rice production areas in consideration of target regions.

• 여성건강간호학회지
• /
• 제4권3호
• /
• pp.375-387
• /
• 1998

In clinical trials of nursing research, the sample size determination is one of the most important factor. Although sample size must be considered at the design stage, it has been disregarded in most clinical trials. The power analysis is usually performed before study begins to compute sample size and the power can also be calculated at the end of study in order to justify study result. The power analysis is essential especially when the clinical trials can not show significant differences. In this paper, we review the statistical methods for power analysis and sample size formulae in nursing research. Sample size formulae and the corresponding examples are discussed according to the six types of studies ; mean for one sample, proportion for one sample, means in two samples, proportions in two samples, correlation coefficient and ANOVA.

• Ocean and Polar Research
• /
• 제39권2호
• /
• pp.73-84
• /
• 2017

The probability distribution of ichthyoplankton is important for enhancing the precision of sampling while reducing unnecessary surveys. To estimate the ichthyoplankton detection proportion (IDP) and its margin of error (ME), the monitoring information of the chub mackerel's (Scomber japonicus) ichthyoplankton presence-absence sampling data has been were collected over approximately 30 years (from 1982 to 2011) in the Korean coastal seas. Based on the computed spatial distributions of the mackerel's IDP and ME, the confidence interval (CI) range, defined as 2 ME, decreases from approximately 80% to 40% as the sample size n increases from 4 to 24 and the ME is approximately 40% in the typical (seasonal survey) case n = 4 per year. The IDP and ME off Jeju Island are relatively high at the 0.5-degree smoothing level. After increasing the spatial smoothing level to 1.0-degree, the ME decreased, and the spatial distribution pattern also changed due to the over-smoothing effects. In this study, the 0.5-degree smoothing is more suitable for the distribution pattern than the 1.0-degree smoothing level. The area of the high IDP and the low ME on the mackerel's ichthyoplankton was similar to the estimated spawning ground in the Korean peninsula. This information could contribute to enhancing for the spawning ecology surveys.

• Journal of the Korean Data and Information Science Society
• /
• 제23권1호
• /
• pp.53-61
• /
• 2012

많은 조사에서 표본 크기는 유의수준 또는 제1종 오류확률만을 고려하여 결정하였으나 최근에는 다양한 분야를 중심으로 제1종 오류확률뿐만 아니라 제2종 오류확률 또는 검정력을 함께 고려하여 표본 크기를 결정하는 경우가 늘어나고 있다. 이런 경향은 표본을 많이 얻을 수 없는 연구에서 더욱 뚜렸하다. 본 연구에서는 모평균과 모비율에 대한 검정에서 제1종 오류뿐만 아닌 제2종 오류를 고려한 경우 필요한 표본 크기를 결정하는 과정을 살펴보고 이를 웹사이트를 통해 공개하였다. 또한 주어진 표본 크기와 유의수준에 의한 검정력 계산도 함께 공개하였다.

• Journal of Biosystems Engineering
• /
• 제32권2호
• /
• pp.77-83
• /
• 2007

The purpose of this study is to find optimal conditions for various outlet clearances of prototype garlic clove separator with a rotating cone in the constant inlet clearance and cone height. Optimal outlet clearance from medium to small size garlics was 25 mm at the $200{\sim}400rpm$. For large garlic, optimal outlet clearances of Namdo and Uiseong garlic were 34 mm and 37 mm, respectively, in the range of $300{\sim}400rpm$. The proportion of garlic separation was over 95% for all quality of garlics. The proportions of damaged garlics at 25 mm and 28 mm outlet clearances were below 5% and below 10%, respectively. Therefore, in order to maintain high performance of garlic separation for the various varieties and qualities, the rotating cone type separator should be designed with cone speed ranges of $200{\sim}400rpm$ and the outlet clearance ranges of $25{\sim}37 mm$. The outlet clearance of the separator should be easily controlled within those ranges.

• 한국패류학회지
• /
• 제22권2호
• /
• pp.151-155
• /
• 2006

Proportion of Tegillarca granosa surviving after 2-6 hrs air exposure with 12 hrs interval at $20^{\circ}C$ and $28^{\circ}C$ for 20 days showed 85-100%, 80-100%, respectively. The survival rate was somewhat lower at high temperature but not significant (p < 0.05). Subsequent exposures for 7-9 days showed survival rate of 8.0-24.1% at $20^{\circ}C$ and $28^{\circ}C$. Oxygen consumption rates and filtration rates were significantly higher for 4 to 6 hrs exposures, compared with the preceding exposures. On the other hand, at $28^{\circ}C$, oxygen consumption rates in adult granular ark for 6 hrs exposure during 20 days had significantly decreased. Filtration rates in study groups increased a little over extended period of exposure, compared with those in control groups, and were similar irrelevant to the time of exposure and size of experimental animals. It is concluded, in view of their viability and oxygen consumption rate during air exposure, that ark shells have quite a high resistance to air exposure with their limited range of responses.

• 한국주조공학회지
• /
• 제17권6호
• /
• pp.608-614
• /
• 1997

The effect of mold preheating temperature on the microstructure such as grain size, eutectic silicon morphology was investigated for the Al-7wt%Si-0.3wt%Mg alloy. Microstructural variations have been characterized as a function of Sr addition and cooling rate during solidification. Microstructures were correlated with cooling rate, local solidification time and eutectic nucleation temperature, etc. In this study, Sr addition caused increase of local solidification time, undercooling and reduction of eutectic plateau temperature. In logarithmic scale, local solidification time was in inverse proportion to cooling rate. Eutectic nucleation temperature was in inverse proportion to cooling rate of logarithmic scale. Increasing the cooling rate refined dendrite arm spacing and eutectic silicon. Dendrite arm spacing was logarithmically in inverse proportion to cooling rate. Without modifier addition, eutectic silicon was modified at cooling rate of $7^{\circ}C/s$ or higher.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.97-100
• /
• 2005

The purpose of this study is to research the basic property of mortar as the grading distribution of copper slag used as fine aggregate and the results are as follows. The compressive strength of mortar as the size of largest diameter of copper slag granule is the highest when the largest size is in 2.5-5mm, and flow of mortar is in proportion to the size. As the largest size of copper slag particle is under 2.5mm(Type 1) the compressive strength and flow is higher as the big granules is more included than small ones. As the largest size of copper slag granule is under 5mm(Type 2) the compressive strength and flow is similar to situation of Type 1, except compressive strength is higher as the percent of the size of granule in $2.5\~5mm$ is under 35$\%$. F.M.(Fine Modulus), compressive strength and flow is relative each other except the batch with 2.5$\∼$5mm granule size of copper slag.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.502-507
• /
• 2019

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100-450 ㎛ are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80℃ and 200℃ in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800℃ for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.

• International Journal of Concrete Structures and Materials
• /
• 제18권2E호
• /
• pp.117-124
• /
• 2006

Porous concrete has been used recently for the purpose of decreasing the load on the earth environment. It consists solely of cement, water and coarse aggregate of uni form size. Its fundamental properties are considerably affected by the physical properties of aggregate because the aggregate is the main material for the most part in its mix proportion. Because of this reason, this study carried out an investigation of the influence of the size and type of aggregate on the fundamental properties of porous concrete. It is shown that the fundamental properties of porous concrete was seldom affected by the size of aggregate except for the case of using $2.5{\sim}5mm$ aggregate but varied significantly by the type of aggregate. In particular, the compressive strength of porous concrete using $2.5{\sim}5mm$ aggregate was much higher than that using other aggregate, and its void ratio and coefficient of permeability was lower. Moreover, the capacity to maintain the permeability of porous concrete was found to vary by the size and type of aggregate. Of particular notice was that it decreased greatly when $2.5{\sim}5mm$ aggregate was used. Unlike ordinary concrete, porous concrete exhibited very high dynamic modulus of elasticity at early age and continued to increase but slowly afterwards.