• Title/Summary/Keyword: Size and Proportion

Search Result 1,019, Processing Time 0.027 seconds

Optimization of Heat exchanger Capacity to Maximize the Performance and Energy Efficiency of TEM Dehumidifiers (열전모듈 제습기의 제습 능력 및 에너지 효율 극대화를 위한 열교환기 용량 최적화)

  • Lee, Tae-Hee
    • Journal of the Korean Society for Geothermal and Hydrothermal Energy
    • /
    • v.17 no.3
    • /
    • pp.13-20
    • /
    • 2021
  • The capacity optimization of the heat exchanger of the TEM dehumidifier was performed through numerical analysis. If the ratio of the size of heat exchangers on the cold and hot surfaces of the TEM is not appropriate, the larger the size of the heat exchanger results the lower performance and efficiency. Optimizing the ratio of heat exchangers on the cold surface of TEM can improve the performance and the efficiency compared to when the ratio is 50%. The optimal proportion of cold surface heat exchangers is inversely proportional to the sum of the size of the heat exchangers on the cold and hot surfaces. When the optimum ratio of cold surface heat exchanger was applied, the larger the sum of size of the two heat exchangers results the greater the improvement of the performance and efficiency, compared to when the ratio of cold surface heat exchangers is 50%.

Population Dynamics of Arisaema robustum (넓은잎천남성 (Arisaema robustum) 개체군의 동태)

  • 민병미;유진숙
    • The Korean Journal of Ecology
    • /
    • v.21 no.1
    • /
    • pp.27-33
    • /
    • 1998
  • Arisaema robustum, which has the ability to change sex, was studied in a temperate broadleaf forest of Sanseong-ri, Joongbu-myeon, Gwangju-gun, Kyonggi Province, Korea. \ulcornerThe study, carried out from 1993 to 1997, focused on population dynamics energy budget among organs, size distribution, mortality, the relationships between sex and size, seed production and germination rate. In terms of energy budget among the organs, the ratio of aboveground to belowground biomass was 36.6 : 63.4 in non-female plants, and 81.4 : 18.6 in female plants. Also, in female plants, the ration of leaf to sexual organ biomass was 39.5 : 41.9. Therefore, the belowground ratio of female plants was lower than that of non-female plants. Plants were classified into 8 levels relative to the amount of leaf area by $100cm^2$. The rates of the smallest and the largest classes were 49% and 1%, respectively, and population distribution by size was relatively stable. The mortality averaged 13.1% per year and decreased in inverse proportion to leaf size (6.6% in the smallest and 0.0% in the largest size classes). Leaf areas were $64.1{\pm}48.5cm^2$ in non-flowering plants, $232.1{\pm}123.9cm^2$ in males and $444.8{\pm}153.9cm^2$ in females. The increase rates of leaf area per year varied from 1.9% in plants changing from female tomale, to 152.4% in plants changing from non-flowering to female. But plants which remained female for 2 years showed a decrease of 34.7%. >From this result, it is thought that the female plants invest more energy to reproduction than to vegetative organs. The correlation coefficient (CC) value between plant size and the number of seeds produced (0.55) was larger than the CC value between plant size and total seed weight (0.73). That is, the larger the plant size, the heavier the seed produced. The germination rate increased along with seed weight, and it was 95% in plants which were over 60mg fresh weight/seed.

  • PDF

Flow Cytometric Analysis of Bovine Granulosa Cells : Changes of Cell Cycle During Follicular Maturation (Flow Cytometer를 이용한 소 과립막세포의 분석 : 난포성숙에 따른 세포주기의 변화)

  • 김해정;김동훈;이훈택;정길생
    • Korean Journal of Animal Reproduction
    • /
    • v.17 no.4
    • /
    • pp.279-285
    • /
    • 1994
  • The objective of the present study was to characterize the cell cycles of granulosa cell populations during follicular maturation in cattle by using flow cytometer. Granulosa cells were isolated from bovine preovulatory antral follicles of F1(>10mm), F2(5~20mm), F3(3~4mm) and F4(1~2mm) diameter and fixed and stained with fluorochromes that selectively bine to DNA. Flow cytometer equipped with a laser excitation system was used to analyze the intensity of fluorescence from stained cells. Forward angle light-scatter(FSC) and 90$^{\circ}$light-scatter(SSC) signals were adopted to measure the size and the granularity of granulosa cells. As a results of FSC/SSC analysis, granulosa cell populations(G1 phase of cell cycle) from each follicle were relatively regular in size and granularity, regardless of follicular size. However, their distribution in granularity was greater than that in size. Most of granulosa cell populations collected from each follicle were distributed in G0/G1, S and G2/M phases. As the follicles approached to ovulation the percentage of cells in the proliferative phases of cell cycle (S and G2/M) decreased significantly, but there was a concomitant increase in the percentage of granulosa cells in G1 phase. Therefore, these data indicate the proportion of main populations to cell cycle of granulosa cells may be changed from proliferative phase to G1 phase during follicular maturation in cattle.

  • PDF

The Study on Properties of NEPE System Propellant to Size of RDX (RDX 입도에 따른 NEPE계 추진제 특성 연구)

  • Jang, Myungwook;Kim, Taekyu;Han, Haeji;Yun, Jaeho;Son, Hyunil
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2017.05a
    • /
    • pp.972-977
    • /
    • 2017
  • The propellant tile and crack which account for the greatest proportion of solid rockets are profoundly affected by viscosity and mechanical properties of solid propellant. In this paper solid propellant with nitrate ester polyester(NEPE) system has been researched for the viscosity, mechanical properties and burning properties with size and mixing ratio of RDX. the viscosity of propellant was changed significantly depending on the size of RDX and mixing ratio, and mechanical properties of NEPE system propellant were also varied. Considering both lower viscosity and stable mechanical properties, the optimum size and mixing ratio of RDX can be identified as the main factors to the NEPE system propellant.

  • PDF

Guidelines for the Investigation and Management of Ground Glass Nodules

  • Lee, Jun Hee;Hong, Jeong In;Kim, Hyun Koo
    • Journal of Chest Surgery
    • /
    • v.54 no.5
    • /
    • pp.333-337
    • /
    • 2021
  • The clinical significance of ground-glass nodules (GGNs) has been investigated in extensive clinical research for many years. The natural history of GGNs is known to be closely related to their size, proportion of solid components, and size progression over time. Based on these data, several guidelines for GGN management have been published worldwide. The indications for nonsurgical biopsy or surgical resection of GGNs are as follows: pure GGNs between 5 and 10 mm in size if they increase in size or show development of a solid component at follow-up, pure GGNs >10-15mm that remain stable but persistent, part-solid nodules >8 mm persisting at follow-up, or part-solid nodules with a solid component >6 mm at follow-up. Newly updated data considering geographical or racial factors and recent developments in surgical techniques may improve the surgical indications for GGNs in the near future.

A Study of Crystallization and Fracture Toughness of Glass Ceramics in the $ZrO_2.SiO_2$ Systems Prepared by the Sol-Gel Method (졸-겔법으로 제조한 $ZrO_2.SiO_2$계 결정화유리의 결정화 및 파괴인성에 관한 연구)

  • 신대용;한상목;강위수
    • Journal of the Korean Ceramic Society
    • /
    • v.37 no.1
    • /
    • pp.50-56
    • /
    • 2000
  • Precursor gels with the composition of xZrO2·(100-x)SiO2 systems (x=10, 20 and 30 mol%) were prepared by the sol-gel method. Kinetic parameters, such as activation energy, Avrami's exponent, n, and dimensionality crystal growth value, m, have been simultaneously calculated from the DTA data using Kissinger and Matusita equations. The crystallite size dependence of tetragonal to monoclinic transformation of ZrO2 was investigated using XRD, in relation to the fracture toughness. The crystallization of tetragonal ZrO2 occurred through 3-dimensional diffusiion controlled growth(n=m=2) and the activation energy for crystallization was calculated using Kissinger and Matusita equations, as about 310∼325±10kJ/mol. The growth of t-ZrO2, in proportion to the cube of radius, increased with increasing heating temperature and hteat-treatment time. It was suggested that the diffusion of Zr4+ ions by Ostwald ripening was rate-limiting process for thegrowth of t-ZrO2 crystallite size. The fracture toughness of xZrO2·(100-x)SiO2 systems glass ceramics increased with increasing crystallite size of t-ZrO2. The fracture toughness of 30ZrO2·70SiO2 system glass ceramics heated at 1,100℃ for 5h was 4.84 MPam1/2 at a critical crystaliite size of 40 nm.

  • PDF

The Predicted Scale of Sasang Constitutional Medical Service Market in 2020 (문헌고찰을 통해 알아본 2020년 체질 의료 서비스 시장 규모)

  • Jang, Eun-Su
    • Journal of Sasang Constitutional Medicine
    • /
    • v.29 no.1
    • /
    • pp.14-20
    • /
    • 2017
  • Objectives Recently, the demand for complementary & alternative and personalized medical service has increased in the world. The purpose of this study was to predict the future market size of constitutional medical service in Korea through past surveyed studies Methods The portal sites of OASIS, NDSL, RISS, KISS, Koreamed, were used to select the researches related with constitutional medical service market. Total 1,477 papers were identified and 43 of them were fully reviewed. Finally, three of them picked up. Two specialists joined this review. Results and Conclusion The rate of constitutional medical service market among Korean medical service market was 23.2% in 2004 survey, 26.6% in 2007, and 23.5% in 2010. The number of Korean medical clinics and hospital was assumed 17,118 in 2020. The market size of Korean medicine was predicted 698,929 ten million won and among them, the scale of constitutional market size was 181,171 ten million won which meaned 25.9% proportion of Korean medical market size. Conclusion Constitutional medical market seems to be developed faster than Korean medical market in future.

Image Based Damage Detection Method for Composite Panel With Guided Elastic Wave Technique Part II. Damage Size Estimation Algorithm (복합재 패널에서 유도 탄성파를 이용한 이미지 기반 손상탐지 기법 개발 Part II. 손상크기 추정 알고리즘)

  • Kim, Changsik;Jeon, Yongun;Park, Jungsun;Cho, Jin Yeon
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.49 no.1
    • /
    • pp.13-20
    • /
    • 2021
  • In this paper, a new algorithm is proposed to estimate the damage size by combining the reflected area with the reflected position and extracting contours in proportion to the maximum value of pixels from the visible image. The cumulative summation feature vector algorithm is used to obtain the area of the reflected signal. To get the position of the reflected signal, the signal correlation algorithm is used to decompose the reflected signal from the damage. The proposed algorithm is tested and validated for composite panels. Repetitive experiments are performed and it is confirm that the proposed algorithm is reproducible. Further, it is verified that the damage size can be estimated appropriately by the proposed algorithm.

Comparisons of the Performance with Bayes Estimator and MLE for Control Charts Based on Geometric Distribution (기하분포에 기초한 관리도에서 베이즈추정량과 최대우도추정량 사용의 성능 비교)

  • Hong, Hwiju;Lee, Jaeheon
    • The Korean Journal of Applied Statistics
    • /
    • v.28 no.5
    • /
    • pp.907-920
    • /
    • 2015
  • Charts based on geometric distribution are effective to monitor the proportion of nonconforming items in high-quality processes where the in-control proportion nonconforming is low. The implementation of this chart is often based on the assumption that in-control proportion nonconforming is known or accurately estimated. However, accurate parameter estimation is very difficult and may require a larger sample size than that available in practice for high-quality process where the proportion of nonconforming items is very small. An inaccurate estimate of the parameter can result in estimated control limits that cause unreliability in the monitoring process. The maximum likelihood estimator (MLE) is often used to estimate in-control proportion nonconforming. In this paper, we recommend a Bayes estimator for the in-control proportion nonconforming to incorporate practitioner knowledge and avoid estimation issues when no nonconforming items are observed in the Phase I sample. The effects of parameter estimation on the geometric chart and the geometric CUSUM chart are considered when the MLE and the Bayes estimator are used. The results show that chart performance with estimated control limits based on the Bayes estimator is generally better than that based on the MLE.

A Study on Various Effecting Factors on Water Proofing Properties of Cement Mortar (시멘트 몰탈의 방수성능에 미치는 제반 영향인자에 관한 연구)

  • 신도철;이종열
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 1995.04a
    • /
    • pp.100-105
    • /
    • 1995
  • The aim of this study is to developed water proofing properties of cement mortar this study the effect of mix proportion on the basic characteristics of cement mortar was investigated. Also water absorption and permeability properties of mortar using several admixtures were tested. from this results, Physical properties of mortar is improved by using the sand witch has a broad particle size distribution. Also the sililca alumina powder is effective for decreasing the water permeability of mortar and zinc stearate is in creasing the water repellence property.

  • PDF