• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.2
• /
• pp.236-248
• /
• 2020

Objectives: The purpose of this study was to evaluate the concentrations of particulate matter generated during coffee roasting and to study various factors affecting the concentrations. Methods: Differences in concentration levels were investigated based on various factors to understand the emission rates of particulate matter over time and to compare the mass and number concentrations according to their size. Sampling was performed in closed laboratories without the operation of air conditioning or ventilation. Optical Particle Sizer(OPS) was used as a measuring device. An OPS measures using a light-scattering method. Sampling was performed for sixty minutes at one-minute intervals. The background concentration was measured for about 30 minutes before starting of coffee roasting. The concentrations of particulate matter generated during coffee roasting were monitored until roasted coffee beans were removed from the roaster and cooled down. Several factors affecting the concentrations of particulate matter were investigated, which includes the origins of green beans, the roasting level, and the input amount of green beans. Results: The results of this study may be summarized as follows: 1) There was no difference in particulate matter concentration levels by the origin of the green beans, but a statistically significant difference in concentration levels by roasting level and the input amount of green beans; The higher the roasting level, the higher was the particulate matter concentration. The more green beans we put in the roaster, the higher were the concentrations; 2) The PM10 mass concentrations increased over time. The average concentration after roasting was higher than the average concentration during roasting; 3) In the distribution of mass and number concentration by particle diameter, the majority of particles was below 2.5 ㎛. Conclusions: Persons who work in roastery cafes can be exposed to high concentrations of particulate matter. Therefore, personal exposure and risk assessment should be conducted for roastery cafe workers.

• Journal of the Korean Society of Visualization
• /
• v.6 no.2
• /
• pp.45-50
• /
• 2008

It has been found that the colony size of bacteria grown on an agar plate decreases with increasing agar gel concentration. Evidenc from recent studies suggests that the bacterial colony dynamics is closely related with the mechanical properties of the substrate. We investigate whether bacterial growth on the agar substrate is controlled mostly by the nutrients' diffusion which is hindered more in porous medium than in solution. The number of bacterial cells in single colonies is found to be inversely correlated with agar concentration. High-resolution live cell imaging at the single bacterium level confirms that the bacterial growth rate is reduced with increasing agar concentration. There is a strong correlation between the slowed diffusion and the reduced number of cells in a high concentration of agar medium.

• New & Renewable Energy
• /
• v.19 no.2
• /
• pp.31-39
• /
• 2023

Salinity gradient energy can be generated from a mixture of water streams with different salt concentrations by using reverse electrodialysis (RED). In this study, we evaluated the effect of stack size and number of cell pairs on the energy efficiency and specific energy of the RED process. Additionally, we studied the prementioned parameters to maximize the power density of RED. The performance of the RED stack which used a patterned ion exchange membrane, was evaluated as a function of stack size and feed flow rate. Moreover, it was noted that an increase in stack size increased the ion movement through the ion exchange membrane. Furthermore, an increase in feed flow rate led to a reduction in the concentration variation, resulting in an increase in OCV and power density. The energy efficiency and specific energy for 100 cells in the 10 × 10 cm² stack were the highest at 12% and 0.05 kWh/m³, respectively, while the power density from 0.33 cm/s to 5 × 5 cm² stack was the highest at 0.53 W/m². The study showed that the RED performance can be improved by altering the size of the stack and the number of cell pairs, thereby positively affecting energy efficiency and specific energy.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.5
• /
• pp.9-17
• /
• 2009

A study on fugitive dusts was conducted at Saemangeum reclaimed land and the neighboring farm located at the west coast of Korea. After the area was completely reclaimed in 2006, halophyte plants and several windbreak systems were installed. The distributions of suspended dust particle was regularly measured through field experiment. The size of dust source area was also analyzed periodically and then it was determined to be in the following order: Buan > Gimje > Gunsan. The suspended dust which were dispersed to the neighboring areas were significantly affected by the size of the soil particles, wind velocity and wind direction. The results of Big Spring Number Eight (BSNE) experiments also showed that the concentration of the fugitive dust generated from the reclaimed land was reduced remarkably by the presence of halophyte plants. Recently, in 2008, the measured dust concentration rate was decreased by an average of 30.6%. The average dust concentration is expected to decrease further as more areas are being covered by halophyte plants.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.1
• /
• pp.59-65
• /
• 1999

For a cosmetic plant wastewater containing surfactants of high concentration, adsorption treatment by granular activated carbon(GAC) having different pore size distribution was studied. Three sorts GACs were used and regenerated afterwards with methanol. Experiments were composed of batch process and column test for both virgin and regenerated GACs. Following conclusions were drawn from the study: Methylene blue activating substance(MBAS) adsorption data from the batch tests for three GACs are described well by BET isotherm and Freundich isotherm. Simulation with the BET isotherm shows that maximum adsorption appears to be affected not only by specific surface area but also by pore size distribution. Maximum adsorption from the BET isotherm for MBAS appears to diminish as the number of reactivation increases. The diminishing ratio of maximum adsorption appears to decrease as the pore size decreases. Recovery ratio of the methanol by vacuum evaporation from the spent methanol ranges from 95% to 97%.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.339-345
• /
• 2009

The graft copolymerization of acrylonitrile-EPDM-styrene (AES) was investigated under various reaction conditions such as the concentration of initiator, the content of diene and viscosity of EPDM, and the concentration of solvents. The conversion increased but the molecular weight and the rubber particle size decreased with the concentration of initiator. The graft ratio(GR) increased at low concentrations of the initiator but, after the maximum value, it gradually decreased with the concentration of initiator. Toluene as a single solvent gave the highest conversion and the mixture of ethyl benzene and toluene was better than toluene. The rubber particle size increased with the viscosity of EPDM and the graft ratio and the number of rubber particles with occluded SANs increased with the content of diene.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.4
• /
• pp.508-514
• /
• 2010

The objective of this work presented here was experimental study of steadystate and cold start exhaust nano-sized particle characteristics from common rail diesel engine. The effect of the diesel oxidation catalyst (DOC) on the particle number reduction was insignificant, however, particle number concentration levels were reduced by 3 orders of magnitude into the downstream of diesel particulate filter (DPF). In high speed and load conditions, natural regeneration of trapped particle occurred inside DPF and it was referable to increase particle number concentration. As fuel injection timing was shifted BTDC $6^{\circ}CA$ to ATDC $4^{\circ}CA$, particle number concentration level was slightly reduced, however particle number and size was increased at ATDC $9^{\circ}CA$. Nucleation type particle reduced and accumulation type particle was increased on EGR condition.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.2
• /
• pp.133-143
• /
• 2003

Numerous evidence have been reported that fine particulate matters can play an important role in threatening human health. Recently concerns on fine particle pollution from various engines may require re-examination of particulate emission standards. The particles emitted by most diesel engines are mainly divided into their size ranges such as Dp< 50 nm and 50 nm< Dp< 1,000 nm. In this work, the number concentration and the size distribution of fine particles emitted from an exhaust manifold of a railroad diesel engine were measured under load test conditions using a scanning mobility particle sizer (SMPS). The fine particles observed were within the range of 7 to 304 nm under different load conditions with two different dilution ratios. The fine particles exhibited unique patterns showing bimodal shapes in size distribution.

• Journal of the Korean earth science society
• /
• v.33 no.3
• /
• pp.259-268
• /
• 2012

To investigate the fluctuation of marine aerosol number concentration at each different size with vertical winds in ocean area, aerosol particles and vertical wind components were measured in the Ieodo Ocean Research Station, which is located to 419 km southwest of Marado, the southernmost island of Korea, from 8 to 22 June 2009. The Laser Particle Counter (LPC) and ultrasonic anemometer were used to measure the number of aerosol particles and vertical wind speed. Surface weather chart, NCEP/NCAR reanalysis data and sounding data were used to analyze the synoptic condition. The distribution of aerosol number concentration had a large fluctuation of bigger particles more than 1.0 ${\mu}m$ in diameter by vertical wind speed during precipitation. The aerosol particles larger than 1.0 ${\mu}m$ in diameter increased as the wind changed from downward to upward during precipitation. The aerosol number concentration of bigger size than 1.0 ${\mu}m$ in diameter increased about 5 times when vertical velocity was about 0.4 $ms^{-1}$. In addition, the accumulation and coarse mode aerosol number concentration decreased about 45% and 92%, respectively compared to concentrations during precipitation period. It is considered that vertical wind plays an important role for the increasing of coarse mode aerosol number concentration compared to the large aerosol particles sufficiently removed by the scavenging effect of horizontal winds. Therefore, the upward vertical winds highly contribute to the formation and increase in aerosol number concentration below oceanic boundary layer.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.6
• /
• pp.109-124
• /
• 2020

This study examines the concentration in terms of supply and consumption in the Korean movie market, focusing on screen size, nationality, and the box office. For analysis, it selects the top 100 movies in the box office each year for 15 years from 2005 to 2019. According to the result, the number of screens increased steadily every year, and the screen concentration became very high. For the top 100 movies, it increased from 12% to 30% of the total screen. It became higher in the case of the top 10 movies. As the number of screens increased, multiplex assigned more screens to one movie. Multiplex's screen allocation continued to increase, with one movie taking up more 60% of the total screen. This became more serious after 2011 and 2012. Market share of the top 100 movies accounted for about 95% of the total box office performance, even though the number of released movies is about 3,000. Whether multiplex preferred Hollywood movies or not, its screen assignment was found to favor Hollywood movies over Korean ones. In the case of film nationality, both Korean and Hollywood movies accounted for 90.7%. Two countries had a market share of 96.6%. There was no single side except Korea and the United States in the top 10. The increase in the number of screens deepened the concentration in screen allocation. The concentration in the screen allocation led to the concentration of consumption. The Korean film market is the case where the increase of movie screens did not create a diversity of supply and consumption. It also did not affect the diversity of film nationality. This research reveals that supplied concentration and consumed concentration are positively correlated, and that the former is a little lower than the latter.