• 제목/요약/키워드: Six-Port

검색결과 162건 처리시간 0.03초

Performance of Dual Polarized MIMO System using Six-Port Receiver for Cognitive Radio

  • 이상엽;양완철;이정석;김학선
    • 방송과미디어
    • /
    • 제11권1호
    • /
    • pp.78-85
    • /
    • 2006
  • Cognitive radio is a paradigm for wireless communication in which either network of wireless node itself changes particular transmission or reception parameters to execute its tasks efficiently without interfering with the licensed users. This paper represents a performance of the cognitive radio technology on dual polarized MIMO system using six-port receiver. Six-port technology is well known direct conversion receiver. In this paper, a six-port phase discriminator based polarization signal separation is shown. That is, the SER(Symbol Error Rate) performance is improved using polarization separator and simple receiver architecture is proposed applying six-port receiver. The six-port technology has priority to adapt changeable frequency system and variable environments for cognitive radio. In general, dual polarized MIMO system has good capacity and quality using polarization separator [1].

Software Defined Radio를 위한 I/Q 부정합 보정 기능을 갖는 이중 대역 Six-Port 직접변환 수신기 (Dual-Band Six-Port Direct Conversion Receiver with I/Q Mismatch Calibration Scheme for Software Defined Radio)

  • 문성모;박동훈;유종원;이문규
    • 한국전자파학회논문지
    • /
    • 제21권6호
    • /
    • pp.651-659
    • /
    • 2010
  • 본 논문에서는 software defined radio(SDR) 기반의 고속의 다중 모드, 다중 대역을 위한 새로운 six-port 직접변환 수신기를 제안한다. 설계한 수신기는 2개의 CMOS four-port BPSK 수신기와 직교 LO 신호 발생을 위한 이중 대역 1단 polyphase 필터로 구성되어 있다. 0.18 ${\mu}m$ CMOS 공정을 이용하여 마이크로파 대역에서 처음으로 개발한 four-port 수신기는 두 개의 능동 결합기, 능동 발룬, 두 개의 전력 검출기 및 아날로그 디코더로 구현되어 있다. 제안한 polyphase 필터는 type-I 구조를 선택하였으며, LO 신호의 전력 손실을 줄이기 위하여 1단으로 구현 하였고, 커패시터를 사용하는 것 대신하여 LC 공진구조를 적용하여 이중 대역 동작을 구현하였다. 제안한 sixport 수신기의 RF 가용범위를 확장하기 위하여, six-port junction과 전력 검출기에 I/Q 위상 및 크기를 보정하는 회로를 추가하였다. 제안한 회로에서 위상과 크기 부정합의 보정 범위는 각각 8도와 14 dB이다. 제작한 six-port 수신기는 이중 대역인 900 MHz와 2.4 GHz 대역에서 M-QAM, M-PSK의 40 Msps의 변조 신호를 성공적으로 복조하였다.

Schottky 다이오드를 이용한 Six-port용 L/Ku-band 광대역 Power detector 설계 제작 (Design and Implementation of L/Ku-band Broadband Power Detector using Schottky Diode)

  • 김영완
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2006년도 춘계종합학술대회
    • /
    • pp.615-618
    • /
    • 2006
  • 본 논문에서는 직접 변환 방식인 six-port의 RF 출력 신호를 검파하고 요구 대역폭에서 입력 주파수 신호에 대한 진폭 및 위상차를 선형적으로 출력하는 광역 power detector를 설계 제작한다. Six-port 출력단에 접속되는 power detector는 높은 정합도를 갖고 반사파로 인한 Six-port 간 위상 불일치를 방지하고, 넓은 대역폭에서 낮은 VSWR을 유지하여야 하는 광역 특성을 갖는 power detector 설계가 필요하다. L-band의 강제 정합 회로와 Ku-band의 정합 회로 그리고 isolator와 정합 회로를 갖는 power detector 회로를 구성하여 요구하는 Six-port 형 power detector 성능을 평가한다.

  • PDF

집중 소자형 6단자 위상 상관기 설계와 집중 소자형 직접변환 수신 성능 (Design of lumped six-port phase correlator and performance of lumped direct conversion receiver)

  • 유재두;김영완
    • 한국정보통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.1071-1077
    • /
    • 2010
  • 본 논문에서는 집중 소자형 6단자 위상 상관기 구조를 설계 제작하고, 이를 바탕으로 집중 소자형 6단자 위상 상관기를 이용한 L-대역 직접변환 수신 성능을 분석하였다. 제작된 L-대역 집중 소자형 6단자 위상 상관기 소자는 저항형 전력 분배기와 twist-wire 동축케이블을 사용하였으며, 낮은 대역에서 소형화 구조가 가능하고, 광역 특성을 갖는다. 집중 소자형 6단자 위상 상관기를 사용한 L-대역 직접변환 수신 성능은 집중 소자형 6단자 위상 상관기의 LO 단자와 RF 입력 단자에 각각 중심 주파수가 1.69 GHz이고 전력이 -20 dBm인 LO 신호와 QPSK 신호를 입력하여 측정하였다. 집중 소자형 6단자 위상 상관기를 사용한 직접변환 구조는 양호한 I/Q 디지털 신호를 복원할 수 있었다.

직접 변환 수신기를 위한 six port에서의 I와 Q채널의 생성 (I/Q channel regeneration in 6-port junction based direct receiver)

  • 김세영;김낙명;김영완
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2003년도 하계종합학술대회 논문집 I
    • /
    • pp.222-225
    • /
    • 2003
  • 본 논문에서는 six port 를 사용한 실시간 디지털 직접 변환 수신기를 소개하고 실제 six port 구조를 이용해 구현된 직접 변환 수신기의 성능을 분석한다. 제안한 알고리즘은 송신단과 수신단의 위상 오류를 보정하고 랜덤한 채널 잡음 환경에서도 성능의 저하가 크지 않다. 다음으로는 위상 오류 추정 방법을 사용하여 수신기에서의 성능 향상을 컴퓨터 시뮬레이션을 통해서 살펴보았다.

  • PDF

Embedded RF Test Circuits: RF Power Detectors, RF Power Control Circuits, Directional Couplers, and 77-GHz Six-Port Reflectometer

  • Eisenstadt, William R.;Hur, Byul
    • Journal of information and communication convergence engineering
    • /
    • 제11권1호
    • /
    • pp.56-61
    • /
    • 2013
  • Modern integrated circuits (ICs) are becoming an integrated parts of analog, digital, and radio frequency (RF) circuits. Testing these RF circuits on a chip is an important task, not only for fabrication quality control but also for tuning RF circuit elements to fit multi-standard wireless systems. In this paper, RF test circuits suitable for embedded testing are introduced: RF power detectors, power control circuits, directional couplers, and six-port reflectometers. Various types of embedded RF power detectors are reviewed. The conventional approach and our approach for the RF power control circuits are compared. Also, embedded tunable active directional couplers are presented. Then, six-port reflectometers for embedded RF testing are introduced including a 77-GHz six-port reflectometer circuit in a 130 nm process. This circuit demonstrates successful calibrated reflection coefficient simulation results for 37 well distributed samples in a Smith chart. The details including the theory, calibration, circuit design techniques, and simulations of the 77-GHz six-port reflectometer are presented in this paper.

다층형 결합 선로를 이용한 반송파복원기와 위상 변위기를 갖는 6-단자 직접 변환 수신 전처리부 (Six-port direct conversion receiver front-end with carrier recovery circuit and phase shifter using multi-layer coupled line)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제13권11호
    • /
    • pp.2267-2272
    • /
    • 2009
  • 본 논문에서는 다층형 결합 선로를 이용한 6-단자 위상 상관기와 동일한 구조를 갖는 반송파 복원기 그리고 위상 변위기를 갖는 일원화된 6-단자 직접변환 수신 전처리부를 설계 제작한다. 전력 분배기와 하이브리드 결합기로 구성되는 6-단자 소자는 다층형 결합 선로 구조로 이루어지며, 수신부 위상 상관기와 반송파 복원기 그리고 위상 변위기의 기본 구조 요소로 작용한다. 다층형 결합 선로 구조로 구성되는 일원화된 수신 전처리부는 구성이 간단하고 집적화가 용이하다. 설계 제작된 다층형 결합 구조 6-단자 수신 전처리부는 일정한 반송파 신호를 재생하고, PSK 전송 신호를 복원한다.

포트 마스킹이 엔진의 부분부하 성능에 미치는 영향: Part II - 배기 및 연비특성 (Effects of Port Masking on fart Load Performance: Part II - Emission and Fuel Economy)

  • 이원근;엄인용
    • 한국자동차공학회논문집
    • /
    • 제9권5호
    • /
    • pp.23-29
    • /
    • 2001
  • This paper is the second of companion papers, which investigate port-masking effects on emission and fuel economy. Port-masking was applied to commercial SOHC 3-valve engine by inserting masking plates between manifold and port. To induce various conditions of stratification, six types of masking plates were applied. In this paper, main interest is focused on the influence of injection timing on emission and fuel economy. Various injection timing was applied to the six cases, under the stoichiometric and lean-limit air-fuel ratio. Under the stoichiometric condition, an explanation about the reason of the change in emission level due to injection timing change is given. It is observed that NOx emission under the LML condition varies significantly when the injection timing changes.

  • PDF

A Conceptual Model of Port Clusters and Related Assemblages

  • Roh Hong-Seung
    • 한국항해항만학회지
    • /
    • 제30권2호
    • /
    • pp.145-150
    • /
    • 2006
  • Recently we have seen a noticeable trend in ports to establish port clusters. Despite this trend, little research has actually been undertaken to fully define and analyse port clusters. A couple of exceptions have descriptively defined port clusters but the boundaries of port clusters are not apparent. Therefore, the aim of this paper is to define port clusters in terms of set theory and in particular look at them in terms of their distinct characteristics and system boundaries. The main concern of this paper is that there is a need to distinguish, from a system and a competition perspective, between port clusters, ports, maritime clusters and port ranges. This paper proposes a conceptual model relevant to the relationship among port clusters related assemblages and that has been applied to the north western europe region This model suggests six levels of competition that will help port authorities and government to develop appropriate policies and strategies for port operation and port industry.