• 한국건축시공학회지
• /
• 제18권5호
• /
• pp.479-488
• /
• 2018

폐기물 및 이의 재활용 문제는 전 세계적인 환경문제로 인식되고 있으며, 플라스틱 폐기물은 인류의 목숨을 위협하는 가장 큰 사회적 문제로 인식되고 있다. 수직보호망도 플라시틱 수지를 사용하여 제조되는 것으로서 건설현장에서는 거푸집 공법 시공시 바깥면에 설치하여 낙하물 및 먼지의 비산 등을 방지하기 위하여 수직으로 설치하는 것으로서 본 연구에서는 건설현장에서의 수직보호망의 사용실태 파악과 최근 강화되고 있는 건설현장에서의 환경관련 규정의 변화와 이에 따른 현장기술자들의 인식을 제고하기 위함을 목적으로 진행하였다. 그리고 이를 바탕으로 건설현장에서 플라스틱수지를 사용하여 제조되어 무분별하게 사용되고 있는 수직보호망의 재질에 따른 합리적이고 친환경적인 자재의 사용과 이에 따른 수직보호망의 재활용을 촉진하기 위한 방안을 제시하고자 한다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.392-395
• /
• 2007

도심의 과밀화 등으로 재건축 및 재개발의 활성화, 대규모 택지개발에 의한 신도시 개발, 사회기반시설 확충 등의 증가로 건설폐기물이 급증과 더불어 도심지내 공사장 등에 의한 소음 발생원이 지속적으로 증가하고 다양화됨에 따라 소음${\cdot}$진동관련 환경 분쟁 및 민원이 급증하고 있는 추세이다. 이에 따라 정부는 생활주변의 정온한 환경을 조성하기 위하여 2009년 1월부터 공사장소음규제기준을 현재 70dB에서 65dB로 상향 적용하여 건설공사 관련 환경분쟁 및 민원의 발생이 더욱 증가할 것으로 예상된다. 본 연구에서는 1) '건설공사장 간이 소음 예측 프로그램'을 통한 현장파쇄시설의 소음레벨 예측값과 현장에 설치운영중인 현장파쇄시설의 실측 소음레벨을 비교${\cdot}$분석하여 현장파쇄시설의 소음레벨을 분석하였다. 2) 건설공사 현장에서 현장파쇄시설을 적용하고자 할 경우 소음에 의한 환경 분쟁 및 민원 발생의 최소화 방안을 수립하고자 한다.

• 한국물환경학회지
• /
• 제25권3호
• /
• pp.404-410
• /
• 2009

In this study, research for physical and chemical characteristics were conducted through analysis of sediments, grading and heavy metals (e.g., Mn, Cu, Cd, Zn and Pb ) in sewers which are classified by drainage types. After that, cement solidification and yellow soil calcinations made heavy metals stabilized and then, ways of recycling it were examined. The grain size distribution of all sediments was relative graded. When evaluating heavy metal pollution through index of geoaccumulation (Igeo), Cu showed moderately pollution or strong pollution in forest and street site and Zn was assessed by moderately pollution in military, residential, and street site. Analysis of Pearson Correlation coefficient of heavy metal indicated that all items in street site have tight relationship respectively. Especially, Cd-Zn, Cu-Pb, Cu-Mn, and Pb-Mn have relationship at 99% confidence intervals in statistical analysis. Recycling it with cement solidification was satisfied with compressive strength standard under 55% deposit contents and Zn, Pb, Mn were stabilized effectively. If time and temperature plasticity and compressive strength would be standard, it is revealed that yellow soil calcinations is valuable aggregate when it has 50-60 Wt% contents. When considering economic feasibility and stabilization of heavy metals, cement solidification would be more appropriate than yellow soil calcinations as solution to recycling.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2001년도 정기총회 특별강연 및 춘계학술연구발표회(2)
• /
• pp.77-82
• /
• 2001

• 자원리싸이클링
• /
• 제19권2호
• /
• pp.63-72
• /
• 2010

폐플라스틱 관련 재활용 기술 동향을 조사하기 위하여 특허 검색을 실시하였다. 특허 검색 테이터베이스는 국내 WIPS사의 특허 검색 사이트를 이용하였으며, 특허검색범위는 2009년 9월까지 미국, 유럽연합, 일본과 한국에서 출원 및 공개된 특허로 제한하였다. 본 연구에서는 검색된 특허의 요약문을 분석하여 최종 4,795건의 특허를 대상으로 분석하였으며, 폐플라스틱 재활용 기술동향을 연도별, 국가별, 출원인별로 분석하여 조사하였다. 일본의 특허 출원점유율은 65%으로 전체 특허의 과반수 이상을 차지하고 있었으며, 화학적 재활용 기술에 높은 출원 집중률을 보였다. 한국의 경우, 폐플라스틱 재활용 관련 특허는 물질 재활용에 집중되어 있었다.

• Journal of Biosystems Engineering
• /
• 제29권6호
• /
• pp.544-552
• /
• 2004

This study was conducted to suggest the efficient gathering and recycling method of disused agricultural machinery in rural environment. In order to suggest this methods, the keeping means, maintenance, disused period and kinds of agricultural machinery were investigated. The results obtained in this study were as follows : The disused agricultural machinery have been leaved on the vacant lot of a farmhouse and an around field for $2\~5\;years$. The leaving reason of the disused agricultural machinery was low interesting and gathering price for the disused agricultural machinery. The present situation for recycling method was using as a scrap iron, however to increase recycling percent the disassembling process has to divide as using and parts concretely. And the design of agricultural machinery was considered the easiness of a disassemble and assemble the agricultural machinery. To manage and supply efficiently for the second-hand parts of agricultural machinery need to the establishment of circulation information center and internet site for the parts.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.9-18
• /
• 2001

1. EAF Dust in Japan - Generation and Characteristics. The quantity of dust generated from EAF shops in Japan was estimated to be 520,000 tons/year in 1999. Extremely fine dust (or fume) is formed in the EAF by metal vaporization. Its characteristics such as chemical compositions, phases, particle size, leaching of heavy metal are mentioned. 2. EAF Dust Treatment Methods in Japan. In 1999, 61% of EAF dust was treated by regional zinc recovery processing routes, 25% went to landfill disposal, 4% was reused as cement material, and 10% was treated by on-site processing routes. The problems of EAF dust treatment methods in Japan are: (1) very high treatment cost, and (2) heavy environmental load (leaching of heavy metal, emission of dioxins, depletion of disposal sites, etc). It has been much hoped for that new dust management technology would be developed. 3. New technology of EAF dust treatment in Japan. In Japan, some new technologies of EAF dust treatment have been developed, and some others are in the developing stages. Following five processes are mentioned:. (1) Smelting reduction process by Kawasaki Steel, (2) DSM process by Daido Steel, (3) VHR process by Aichi Steel, (4) On-site dust direct recycling technology, and (5) Process technology of direct separation and recovery of iron and zinc metals contained in high temperature EAF off gas by the Japan Research and Development Center fur Metals.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.97-101
• /
• 2001

Recently, an excavated soil-recycling machine has been receiving considerable attentions. The mobile type excavated soil-recycling machine is able to improve the soils by adding the additives such as slaked lime and cement at the construction site. However, not only the mechanical factors such as paddle inclination angle and pitch of the paddle but also the physical properties of the excavated soils affect the mixing performance of the excavated soils and additives. In this sense, experimental investigations are uneconomical and ineffective. This paper concerns with the numerical simulator to analyze the mixing behavior of excavated soils and additives in the soil-recycling machine with dual shafts in order to assist the economical and effective design of the optimum soil-recycling machine. By using the simulator, several simulations were carried out, and the effects of some mechanical parameters such as the paddle inclination angle and pitch of the paddle on the mixing performance were made clear.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권4호
• /
• pp.362-373
• /
• 2012

The ship recycling industry is growing rapidly. It is estimated that the International Maritime Organization's (IMO) decision to phase-out single hull tankers by 2015 will result in hundreds of ships requiring disposal. At present, the ship recycling industry is predominantly based in South Asia. Due to the bad practice of current scrapping procedure, the paper will highlight the harm occurring to health, safety and environment. The efforts of the Marine Environment Protection Committee (MEPC) which led to the signing of the Hong Kong International Convention are also reviewed. The criteria and standards required to reduce the risk and damage to the environment are discussed and a proposed plan for the safe scrapping of ships is then presented. A technological and economic study for the ship recycling in Egypt is carried out as a case study. This includes the ship recycling facility size and layout. The equipment and staff required to operate the facility are also evaluated. A cost analysis is then carried out. This includes site development, human resources, machineries and equipment. A fuzzy logic approach is used to assess the benefits of the ship breaking yard. The use of the fuzzy logic approach is found suitable to make decisions for the ship breaking industry. Based on given constraints, the proposed model has proved capable of assessing the profit and the internal rate of return.

• 유기물자원화
• /
• 제8권2호
• /
• pp.114-123
• /
• 2000

본 연구는 재활용촉진 수단중 하나인 재활용산업단지의 조성에 관한 기초연구로서, 재활용산업의 필요성, 산업단지의 기능, 산업단지 조성방안 등을 조사 분석하여, 정부에서 재활용산업단지의 조성을 검토할 때 환경적, 경제적인 투자가치를 판단하는 기초자료로 활용될 수 있도록 하기 위해 수행되었다. 수도권에서 재활용산업은 연간 약 4,450억의 소득창출 및 4만4천명의 고용창출 효과를 발생시키고, 앞으로 늘어날 정부의 재활용목표 달성에 기여가능하며, 수도권에 소재하는 재활용제품업의 26.1%가 공장부지의 협소, 17.4%가 계약기간 임박과 주민과의 마찰 등의 요인으로 현재의 공장부지에서 어려움을 겪고 있는 것으로 부터, 재활용산업단지는 재활용제품업체들이 겪고 있는 부지난과 환경문제를 효과적으로 해결할 수 있다고 판단되었다. 재활용산업단지의 조성위치로는 인천강화권이나 서울인접권이 적절한 것으로 나타났으며, 미분양된 일반산업단지의 활용성, 수도권에서의 조성 제한, 재활용 한계치 등을 고려하여 64만평 범위에서 조성하는 것이 적절하며, 입주의사 및 재활용실적의 후진성 면에서 플라스틱업종이 적절하다고 판단되었다.