• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.113-119
• /
• 2011

Safe operation and maintenance of engineered dry storage systems for spent fuel from nuclear power plants basically depends on adequately adopted design requirements. The most important design target of the system are those which provide the necessary assurances that spent fuel can be received, handled, stored and retrieved without undue risk to health and safety of workers and the public. To achieve these objectives, the design of the system incorporates features to remove spent fuel residual heat, to provide for radiation protection, and to maintain containment over the lifespan of the system as specified in the design specifications. The features also provide for all possible anticipated operational occurrences and design basis events in accordance with the design basis as guided by the designated regulations. The general performance requirements of a projected storage system are introduced in this paper. The storage system is designed to store fuel assemblies in associated with designated regulatory requirements. Small increases/decreases in maximum burnup can be adjusted with cooling time. These variations are compensated for by a corresponding small site-specific increase/decrease in the design basis-cooling period, as long as the maximum heat load and radioactivity of loaded fuel assemblies are met. Generic design basis events considered for the storage system are summarized. Shielding and radiological requirements along with mechanical and structural are derived in this study.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.3
• /
• pp.1-11
• /
• 2006

Attempts were made to analyze the national policy of soil contamination prevention and management of inactive or abandoned metal (IAM) mines in Korea. This approach focused on legal systems and legislation, remediation technology development, and the arrangement or distribution of budgets pertaining to national policy since the mid 1990's. Prevention of Mining Damage and Recovery Act enacted. Defines the roles, responsibility and budget of the government when recovering mine damages. However, in 2005 there still remains to improve the national policy of soil contamination prevention and management of IAM mines. Analysis of national and industrialized foreign countries including the United States, the United Kingdom, and the Netherlands suggest the following improvements: i) arranging distinct regulations between strict and non-strict liability criteria for potentially responsible parties; limiting innocent and non-strict liability depending on the period of incurred mining activity, ii) enhancing participation of local communities by enforcing law and legislation, iii) establishing a national database system of (potentially) IAM contaminated sites based on the Website-Geographic Information System, iv) carrying out site-specific risk assessments and remediation of IAM contaminated sites, v) preparation and distribution of clean-up fund at mine sites adequately, and vi) technology development for the cleaning of IAM contaminated sites; awarding positive incentives of a legal nature for participants applying newly developed technology in IAM mines.

• Pediatric Infection and Vaccine
• /
• v.16 no.1
• /
• pp.54-60
• /
• 2009

Purpose : Yellow fever, a mosquito-borne viral hemorrhagic fever, is one of the most lethal diseases. Recently there have been an increasing number of Korean children who have travelled to yellow fever endemic zones and were administered yellow fever vaccine (YFV). Therefore, we carried out this study to provide child travelers with safety information of YFV. Methods : This study was conducted at the International Clinic of National Medical Center in Seoul between April 2007 and June 2008 for the evaluation of adverse events of YFV. One hundred twenty-five children received YFV (17-DD) and were prospectively monitored for adverse events through telephone interviews on day 3, 6, 9, 16, 23 and 30 after vaccination. Results : Adverse events were observed in 31 (24.8%) of 125 child travelers who received the YFV. The mean age was 12.5${\pm}$5.0 years. Sixty-six of the child travelers (52.8%) were males. The common adverse events were pain in 11 (8.8%), swelling in 8 (6.4%) and redness in 7 children (5.6%) at the injection site. The systemic adverse events included mild fever in 5 (4.0%), headache in 5 (4.0%), cough in 4 (3.2%), abdominal pain in 3 (2.4%), and vomiting in 2 children (1.6%). Most of the adverse events were detected within 7 days of administration and there were no differences in adverse events by gender or age. All travelers who had complained of symptoms improved spontaneously or following symptomatic treatment. Conclusion : This study showed that YFV is well-tolerated and there were no reports of severe adverse events. Studies are ongoing to clarify the cause and risk factors for rare adverse events.

• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.1
• /
• pp.341-357
• /
• 2018

Due to the paradigm of open science and advanced digital information technology, data sharing and re-use have been actively conducted and considered data-intensive in a wide variety of disciplines. This study aims to investigate the intellectual structure portrayed by the research products re-using the data sets from ICPSR. For the purpose of this study, a total of 570 research products published in 2017 from the ICPSR site were collected and analyzed in two folds. First, the authors and publications of those research products were analyzed in order to show the trends of research using ICPSR data. Authors tend to be affiliated with university or research institute in the United States. The subject areas of journals are recognized into Social Sciences, Health, and Psychology. In addition, a network with clustering analysis was conducted with using co-word occurrence from the titles of the research products. The results show that there are 12 clusters, mental health, tabocco effect, disorder in school, childhood, and adolescence, sexual risk, child injuries, physical activity, violent behavior, survey, family role, women, problem behavior, gender differences in research areas. The structure portrayed by ICPSR data re-uses demonstrates that substantial number of studies in Medicine have been conducted with a perspective of social sciences.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.4
• /
• pp.90-99
• /
• 2020

The construction industry is suffering from a large number of fatal accidents. As many field works are being conducted in a dangerous condition such as working at height and adverse weather, they are always exposed to safety accidents with high frequency and severity compared to other industries. Such risk is even larger in small construction sites, but studies that focus on combinatorial factors leading to fatal accidents in small construction sites are lacking. Thus, in order to reduce the fatal accidents in the construction industry, this study analyzed 1,438 occupational death accidents cases in small construction sites and, then, conducted the association rule analysis to extract ten combinatorial factors that frequently led to fatal accidents in small construction sites. Based on the extracted association rules, this study also discussed possible countermeasures to reduce the fatal accidents. The results were explained to experts, who agreed on the results of the study. This study contributes to the construction safety management theory by providing a detailed analysis of fatal accidents in small construction sites that can be used for developing and deploying safety policies and educations for small construction site workers.

• Clean Technology
• /
• v.27 no.4
• /
• pp.297-305
• /
• 2021

In the domestic aluminum industry, the extrusion process is a major process accounting for more than 40% of the total production. However, most domestic aluminum extrusion companies produce aluminum using old equipment that is more than 30 years old. Extrusion press is when the equipment is not replaced before the wear and breakage of major parts occur, reducing productivity and increasing the defect rate compared to new equipment. The old extrusion press often loses part drawings, so it is difficult to repair them properly on-site and to remanufacture them due to the lack of technical skills for maintenance. Therefore, a systematic remanufacturing plan must be designed from dismantling the equipment. In this study, remanufacturing FMEA was devised to remanufacture old extrusion press. The risk priority was analyzed by considering the degree of damage to the recycled parts, the cycle due to breakage/damage during the extrusion process, and the value of recycling resources due to remanufacturing. To standardize the remanufacturing process, remanufactured FMEA was performed through part analysis according to the structural analysis of the extrusion press. In addition, remanufacturing priorities were selected for each part, while remanufacturing itself was studied for efficiency of resource circulation and product quality stabilization.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.1
• /
• pp.77-91
• /
• 2019

Recent Linux operating systems having been increasingly used, ranging from automotive consoles, CCTV, IoT devices, and mobile devices to various versions of the kernel. Because these devices can be used as strong evidence in criminal investigations, there is a risk of destroying evidence through file deletion. Ext filesystem forensics has been studied in depth because it can recovery deleted files without depending on the kind of device. However, studies have been carried out without consideration of characteristics of file system which may vary depending on the kernel. This problem can lead to serious situations, such as those that can impair investigative ability and cause doubt of evidence ability, when an actual investigation attempts to analyze a different version of the kernel. Because investigations can be performed on various distribution and kernel versions of Linux file systems at the actual investigation site, analysis of the metadata changes that occur when files are deleted by Linux distribution and kernel versions is required. Therefore, in this paper, we analyze the difference of metadata according to the Linux kernel as a solution to this and recovery deleted file. After that, the investigating agency needs to consider the metadata change caused by the difference of Linux kernel version when performing Ext filesystem forensics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.439-447
• /
• 2019

In this study, experiments were conducted to establish appropriate measures for slopes with high risk of collapse and to obtain results for minimizing slope collapse damage by detecting the micro-displacement of soil in advance by installing a laser sensor and a vibration sensor in the landslide reduction model experiment. Also, the behavior characteristics of the soil layer due to rainfall and moisture ratio changes such as pore water pressure and moisture were analyzed through a landslide reduction model experiment. The artificial slope was created using granite weathering soil, and the resulting water ratio(water pressure, water) changes were measured at different rainfall conditions of 200mm/hr and 400mm/hr. Laser sensors and vibration sensors were applied to analyze the surface displacement, and the displacement time were compared with each other by video analysis. Experiments have shown that higher rainfall intensity takes shorter time to reach the limit, and increase in the pore water pressure takes shorter time as well. Although the landslide model test does not fully reflect the site conditions, measurements of the time of detection of displacement generation using vibration sensors show that the timing of collapse is faster than the method using laser sensors. If ground displacement measurements using sensors are continuously carried out in preparation for landslides, it is considered highly likely to be utilized as basic data for predicting slope collapse, reducing damage, and activating the measurement industry.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.26-33
• /
• 2019

Recently, the rapid growth of the companion animal market has led to the development of animal disease diagnosis kits. Therefore, the utility of the introduction of biomarkers for the development of animal molecular diagnostics is being reevaluated. A good biomarker should be precise and reliable, distinguish between normal and diseased states, and differentiate between different diseases. Recently reported genetic markers, tumor markers (cell free DNA, circulating tumor cells, granzyme, and skin tumors), and others (brucellosis, programmed death recovery-1, symmetric dimethylarginine, periostin, and cysteinyl leukotrien) have been developed. The biomarkers are used for risk prediction or for the screening, diagnosis, and monitoring of disease progression. The most important criteria for related biomarkers are disease specificity. Many potential biomarkers have emerged from laboratory and test studies, but they have not been validated in independent or large-scale clinical studies. Candidate biomarkers evaluate disease associations, verify the effectiveness of biomarkers for early detection and disease progression, and incorporate them into humans and animals. In the future, it will be necessary to reevaluate the utility of well-structured biomarker-based research and study the development of kits that can be used in on-site tests in accordance with the trends introduced in the diagnosis of animal diseases.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.281-288
• /
• 2019

A Flight test is an important process that must be performed to maintain airworthiness in the aircraft lifecycle, including aircraft development and certification. Flight test can be conducted for the purpose of demonstrating or verifying compliance with the applicable standard. Results of the flight test air accident analysis confirm that it is caused by a combination of various factors as well as aircraft. The International Civil Aviation Organization recommends the establishment and implementation of a safety management system to prevent aircraft accidents, but it does not reflect the specificity of the flight test. As such, advanced countries are providing separate criteria to assist stakeholder in conducting flight test safety management. This study investigates and analyzes relevant regulations of advanced countries, in accordance with the construction of a national flight performance test site in Korea, and proposes government-level guidelines to help stakeholders develop their flight test operation manuals. The guidelines discuss topics such as organizational composition, safety and risk management, flight operation, personnel management, and administrative issues.