• 수산해양기술연구
• /
• 제45권3호
• /
• pp.144-150
• /
• 2009

The choice behavior of the octopus in response to the environment-friendly colored sinker for octopus driftline and the sinker's fishing effect were studied under experimental conditions in the water tank and the field. The colors of the sinkers used for the experiment are white, black, yellow and green. Artificial baits are attached to the sinkers in order to attract the octopuses in the experiment. In the water tank experiment, two sinkers of two different colors are placed in a compartmentalized corner of the rectangular tank, and a CCD camera records the choice behaviors of the octopuses to the colored sinkers. In the field experiment, the catch investigation of octopus for each colored sinker was conducted 14 times in total by using 2(A, B) commercial fishing boats at the coast of Gangneung within 30m of depth in 2006. The number of colored sinkers per operation was a total of 24-40 pieces with the same number of sinkers individually for four colors. As a result, it was found that the octopus selected white the most followed by black and yellow in their choice of colored sinkers in the water tank experiment, and green was the lowest in their choice. Even in the field experiment, the sinkers of white and black showed a higher catch of octopus than the sinkers of yellow and green.

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.192-205
• /
• 2007

The objective of this study was to investigate the optimal shapes and arrangements of sinkers attached to net cages to prevent their deformation in a current. A series of model experiments were conducted in a circulating water channel, using 5 different types of sinker(high-weighted ball, low-weighted ball, columntype, egg-shaped and iron bar-framed) and 2 types of square net cage constructed from both Nylon Raschel netting and Nylon knotted netting, on a 1/20th scale. The deflection of the model nets against the flow was smallest with the iron bar-framed weight compared to the other four types of sinker. It was expected that the optimal shapes of sinkers would be either the ball or egg-shape; however, iron bar-framed weight actually had larger drag forces. The dispersed deployment of sinkers on the bottom frames of model net cages performed better with relatively slow flows, while the concentrated deployment at 4 corners functioned better with relatively fast flows, in preventing the nets from becoming severely deformed. The deformation of the net cages was larger for the Nylon knotted netting than the Nylon Raschel netting. With respect to flow resistance, the Nylon Raschel netting, rather than the Nylon knotted netting, was more suitable for construction of net cages.

• 수산해양기술연구
• /
• 제37권1호
• /
• pp.45-51
• /
• 2001

그물의 S$_{n}$S값이 서로 다른 2가지의 상자 구조의 우리형 그물을 1/10로 축소한 모형에 대해 실물 그물의 면적 1$m^2$당 각각 0.1, 0.3, 0.5 및 0.7kg에 상당하는 침자를 그물의 각 모서리에 1개씩 총 4개를 부착하여 회류 수조에서 유속의 변화에 대한 그물의 변형을 측정하고, 이를 통해 조류에 의한 우리형 그물의 형상 유지에 효과적인 침자의 적정량에 대하여 검토하였다. 실험에서 얻어진 결과를 요약하면 다음과 같다. 1. 유속이 증가함에 따라 그물이 날림으로써 그것의 용적은 급격히 감소하였으나, 변형 각도 의 변화량은 증가하였다. 2. 그물의 S$_{n}$S값은 유속이 0.4m/s이하일 때는 그물의 변형에 약간의 영향을 끼쳤지만 유속이 0.5m/s 이상일 때는 별다른 영향을 끼치지 않았다. 3. 그물의 변형은 유속, 침자의 무게 및 S$_{n}$S값에 의해 결정되었다. 4. 그물의 용적을 50% 이상으로 유지하기 위한 침자의 총무게는 유속이 0.3~0.6 m/s일 때 31~245kg이고, 침자의 적정량은 그물의 면적 1$m^2$당 0.5kg 정도로 나타났다.

• 수산해양기술연구
• /
• 제44권3호
• /
• pp.184-193
• /
• 2008

For environment-friendly fishery, the lead sinkers of octopus drift line were developed with the environmentfriendly sinker, and their characteristics and performance were investigated. To make the environmentfriendly sinker, the hydrate ceramic material was developed, and to increase the weight and strength, the iron power was added to it. The fishing hook was machine-made, and standardized, by using 60cm iron wire. For the manufacture of the sinker, the first, the mold was made, and then, hydrate ceramic material and water were quantitatively mixed. The mixture was poured into the mold prepared with a fishing hook already inserted, and had hardened for several hour, before it was taken out of the mold as a complete sinker. The sinkers were made in the 8 types ranging in weight from 150 to 500g, and their specific gravities were diverse from 2.871 to 6.637, which was 0.19 to 0.44 times lower than that of lead. The movement of the environment-friendly sinker by flume tank was possible in the weaker current speed than the similar lead sinker. In the coastal fishing grounds of Gangwon province, the comparison of catching efficiency was made between the improved fishing gears composed of the environment-friendly sinkers and artificial baits, and the current used fishing gears of lead sinkers and pig-fat baits. The result showed the tendency in which the improved fishing gears caught the bigger octopuses than the current used fishing gears. In the quantity and number of the fish catch per unit fishing gear, the improved fishing gear showed a little more catch than the current used fishing gear, regardless of the fishing area. However, the number of the improved fishing gears lost during fishing operation was similar to that of the current used fishing gears.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.504-509
• /
• 1993

A heavy load driving system for the gun laying control is designed with the analysis of performance in pointing accuracy and speed. To eliminate the firing noise and high frequency system noise, a .PI. filter is implemented in conjunction with the PI velocity control. To incorporate the gunner's commands in the PID position control loop easily, a .mu.-processor is utilized in the position control loop. Main difficulties in the heavy load driving system exist in the design of motor drivers and heat sinkers. With an appropriate design of the motor drivers and heat sinkers, the performance of the gun laying system is analyzed by the simulation.

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.29-36
• /
• 2004

선망의 침강 저항 특성을 해명하기 위한 기초 연구로서, 망지의 재료가 다르고 침자량이 동일한 선망 모형의 침강특성을 해석하였다. 실험에 사용한 선망은, 그물실의 직경 및 발의 길이가 같은 폴리프로피렌系 (밀도 0.91g/cm$cm^3$), 폴리아미드系 (밀도 1.14g/cm$cm^3$) 및 폴리에스터系 (밀도 1.38g/cm$cm^3$)의 매듭 없는 망지를 사용하여, 뜸줄의 길이 420cm, 그물의 폭 86cm가 되도록 제작하였다. 이 그물들의 발줄에 침자를 25g, 45g, 60g 의 3 단계로 바꾸어 9종류의 모형그물을 만들고, 각각 PP-25, PA-25, PES-25, PP-45, PA-45, PES-45, PP-60, PA-60 및 PES-60그물이라고 이름을 붙였다. 회류수조의 수로 위에 투망장치를 설치해서 정지 상태의 수중에 투망하고, 관측부 전면에 설치한 비디오 카메라를 이용하여 촬영 녹화하였다. 그리고, 그물에 표시한 측정점의 좌표를 화상해석장치로 읽고 실험치를 구하였다. 여기서, 선망의 수직방향의 침강운동을 나타낸 이론식을 이용하여 수치해석을 행하였는데, 그 결과는 다음과 같다. 1. 침자량이 60g일 때, 아랫자락의 평균 침강속도는 PES그물 12.2 cm/sec로 가장 빠르고, PA그물 11.4 cm/sec, PP 그물 10.7cm/sec 순으로 늦게 나타났다. 2. 망지의 저항계수 $K_D$는, 계산결과 $K_D=0.09(\frac{\rho}{\rho_w})^4$의 관계식으로 나타낼 수 있었다. 3. 그물다발의 저항계수 $C_R$은, 계산결과 $C_R=0.91(\frac{\rho}{\rho_w})$의 관계식으로 나타낼 수 있었다. 4. 선망 투망후 경과시간에 따른 그물 아랫자락의 도달수심에 대한 실험치와 계산치의 관계는 상관성이 매우 높아, 침자량이 25g일 때 meas.=1.04 cal., 45g일 때 meas.=0.99cal.였으며, 60g일 때 meas.=0.98cal.의 관계를 나타냈다.

• 수산해양기술연구
• /
• 제46권1호
• /
• pp.10-19
• /
• 2010

As a series of studies about improvement of yellow croaker drift gill net fishing gear and development of the labor saving fishing system, this study analyzed the behavior characteristics of fishing gear, which does use three types of different sinker materials in the field tests. The result of maritime performance test indicated that the fishing gear which used the lead reached the maximum depth and bio ceramics hauled to the surface of water the fastest. The correlation between the sinking time (St) and depth (Dsl, Dsc, Dsb) of maritime performance test can be shown such experimental equations as Dsl=2.70St - 0.75, Dsc = 2.38St - 1.15, Dsb = 1.77St - 4.00. The correlation between the hauling time (Ht) and depth (Dhl, Dhc, Dhb) of maritime performance test can be shown such experimental equations as and Dhl = 7.88Ht + 35.48, Dhc = 7.80Ht + 40.01, Dhb = 7.95Ht + 36.44.

• 수산해양기술연구
• /
• 제46권1호
• /
• pp.20-31
• /
• 2010

In this research, the submersible fish cage was designed to avoid structural and biological damage during harsh sea conditions. The submersible cage system consists of netting, mooring ropes, a floating collar, floats, sinkers and anchors. Whole elements of the cage were modeled on the mass-spring model. The computer simulations were carried out to investigate the dynamic behavior of the cage and to calculate mooring line tension subjected to tidal currents and waves. As expected, the tension values in the mooring line of the submerged position are 36% less compared to that of the surface cage under the same loading conditions. As the wave was used in combination with the current velocity of 1m/s, the average tensile load for the submerged cage showed 85% of the value for the floating cage. The simulation results provide an improved understanding of the behaviors of the structure and valuable information on the optimized design of the cage system exposed to open ocean environmental factors.

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.101-106
• /
• 2005

This study was carried out to observe the underwater geometry of the anchovy boat seine by two fishing operation systems. One was a traditional operation system that used a fish detecting boat, another was a new operation system that used the same fishing gear with floats and sinkers in comparison with a fish detecting boat. Vertical opening of the fishing gear that used a casting net, working depth of each part of the fishing gear that used a new operation system was almost canstant, but was gradually shallow in a traditional operation system. Just before hauling net, working depth of each part of the fishing gear that used a new operation system was maintained stable, but was vertically unstable in a traditional operation system because as rear part of the fishing gear was risen up the upper layer. Just after hauling net, working depth of the fishing gear that used a new operation system was also maintained stable, and then anchovy school could be lead to bag net.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.509-519
• /
• 2015

Mooring stability of floating dock for construction of Ichthys CPF (central processing facilities), an ultra large offshore structure, was studied. Normal and typhoon conditions were considered for mooring analysis. There have been changes in construction stages of the CPF as project progresses. These changes were reflected on the mooring stability analysis for both conditions. In order to secure the mooring stability of the floating dock for Ichthys CPF under typhoon, maximum loads of mooring chains and maximum offset of the floating dock with Ichthys CPF were examined. Also the shapes of the catenary mooring were investigated to check interferences among mooring chains. As it was confirmed that the mooring loads were within SWL (safe working load) of mooring chains and underwater sinkers, the mooring stability of the floating dock for construction of Ichthys CPF was secured. By achieving security of mooring stability of the floating dock, it is assured that Ichthys project is on its way to success.