• 한국안전학회지
• /
• 제12권4호
• /
• pp.3-8
• /
• 1997

This paper shows a performance estimation of windowing a single tone with added Gaussian noise and uniform noise. Signal-to-noise ratio can be determined by the ratio of the output noisy signal variance to the input noisy signal variance of a window. Standard deviation of noise is reduced by windowing Signal-to-noise ratio of the noisy signal is reduced by the windowing operation. Thus, performance of window function can be determined by this filtering operation that improved the signal-to-noise ratio.

• 한국정밀공학회지
• /
• 제13권5호
• /
• pp.38-43
• /
• 1996

Windowing routines have as their purpose the reduction of the sidelobes of a spectral output of the FFT or DFT routines. Windowing routines accomplish this by forcing the beginning and end of any sequence to approach each other in value. Since they must work with any sequence they force the beginning and ending samples near zero. To make up for this reduction in power, windowing routines give extra weight to the values near the middle of the sequence. The difference between windows is the way in which they transition from the low weights near the edges to the higher weights neqr the middle of the sequence. Signal-to-noise ratio(SNR) can be determined by the ratio of the output noisy signal variance to the input noisy signal variance of a window. Standard deviation of noise is reduced by windowing. Thus, the windowing operation improved the SNR of the noisy signal. This paper shows a performance estimation of windowing on a single tone with added Gaussian noise and uniform noise.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.4-7
• /
• 1997

When we use Hadamard transform spectrometers (HTS), we can increase signal to noise ratio(SNR) by multiplexing which is done by masks. But if the mask has a single defective element, output-SNR decreases. In this paper the effect of a single defective element on the output-SNR is investigated. And a method of compensating for the defective mask element is presented.

• 음성과학
• /
• 제8권2호
• /
• pp.73-81
• /
• 2001

In this paper, we focus on the real time implementation of the single channel adaptive noise canceller(ANC) by using TMS320C30 EVM board. The implemented single channel adaptive noise canceller is based on a reference paper [1] in which it is simulated by using the recursive average magnitude difference function(AMDF) to get a properly delayed input speech on a sample basis as a reference signal and normalized least mean square(NLMS) algorithm. To certify results of the real time implementation, we measured the processing time of the ANC and enhancement ratio according to various signalto-noise ratios(SNRs). Experimental results demonstrate that the processing time of the speech signal of 32ms length with delay estimation of every 10 samples is about 26.3 ms, and almost the same performance as given in [1] is obtained with the implemented system.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 추계학술발표회논문집
• /
• pp.53-56
• /
• 1984

This paper shows that the error probabilities for coherent and noncoherent BF나 systems combined with FH in the presence of single channel tone interference. The performance is developed as functions of the signal to noise ratio and jamming to noise ratio. A specific results for two phases of ㅠ/4 and ㅠ/2 is obtained.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1920-1923
• /
• 2002

This paper proposes an impulse response shortening algorithm applicable to decision feedback equalization of single carrier wideband signal. When he impulse response shortening methods for narrowband signaling are applied to single carrier wideband signals, they result in noise enhancement problem, significantly deterioriting the receiver performance. This problem can be alleviated by educing the eigenvalue spread ratio of the impulse response, which can be achieved by adding additive white noise with small variance to the impulse response of the channel. The performance of the proposed scheme is verified by computer simulation.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2221-2229
• /
• 2022

In this research, for improving the measurement performance of Prompt Gamma-ray Neutron Activation Analysis (PGNAA) set-up, a new optimization method for set-up design was proposed and investigated. At first, the calculation method for Signal-to-Noise Ratio (SNR) was proposed. Since the SNR could be calculated and quantified accurately, the SNR was chosen as the evaluation parameter in the new optimization method. For discussing the feasibility of the SNR optimization method, two kinds of PGNAA set-ups were designed in the MCNP code, based on the SNR optimization method and the previous signal optimization method, respectively. Meanwhile, the single element spectra analysis method was proposed, and the analysis effect of single element spectra as well as element sensitivity were used for comparing the measurement performance. Since the simulation results showed the better measurement performance of set-up designed by SNR optimization method, the experimental set-ups were built for the further testing, finally demonstrating the feasibility of the SNR optimization method for PGNAA setup design.

• ETRI Journal
• /
• 제33권2호
• /
• pp.176-183
• /
• 2011

This paper presents a new analytical approach and experimental verification for the improvement of noise performance in phased-array receivers. For analysis purposes, a multi-channel array system is converted into an equivalent single-channel system, such that the two presents the identical signal and noise powers at the output, respectively. We define an effective gain, noise figure, and signal-to-noise ratio in the equivalent system. Through the proposed approach, the noise performance of the array receiver is analyzed in a general and straightforward manner and then compared to that of each individual array channel. In addition, the phase noise of the array system is analyzed in a rigorous manner, showing its effective reduction by a factor of the array size. The predicted improvement of the noise performance is experimentally confirmed with a CMOS integrated phased-array receiver.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.57-60
• /
• 2004

This paper presents multibit Sigma-Delta ADC using Leslie-Singh Structure to Improve nonlinearity of feedback loop. 4-bit flash ADC for multibit Quantization in Sigma Delta modulator offers the following advantages such as lower quantization noise, more accurate white-noise level and more stability over single quantization. For the feedback paths consisting of DAC, the DAC element should have a high matching requirement in order to maintain the linearity performance which can be obtained by the modulator with a multibit quantizer. Thus a Sigma-Delta ADC usually adds the dynamic element matching digital circuit within feedback loop. It occurs complexity of Sigma-Delta Circuit and increase of power dissipation. In this paper using the Leslie-Singh Structure for improving nonliearity of ADC. This structure operate at low oversampling ratio but is difficult to achieve high resolution. So in this paper propose improving loop filter for single-bit feedback multi-bit quantization Sigma-Delta ADC. It obtained 94.3dB signal to noise ratio over 615kHz bandwidth, and 62mW power dissipation at a sampling frequency of 19.6MHz. This Sigma Delta ADC is fabricated in 0.25um CMOS technology with 2.5V supply voltage.

• 한국정보전자통신기술학회논문지
• /
• 제13권1호
• /
• pp.8-16
• /
• 2020

본 논문에서는 polymerase chain reaction (PCR) 응용에 적합한 저잡음 CMOS 이미지 센서에 사용되는 컬럼-패러럴 analog-to-digital converter (ADC) 어레이를 위한 cascaded-of-integrator feedforward (CIFF) 구조의 단일 비트 2차 델타-시그마 모듈레이터를 제안하였다. 제안된 모듈레이터는 CMOS 이미지 센서에 입사된 빛의 신호에 해당하는 픽셀 출력 전압을 디지털 신호로 변환시키는 컬럼-패러럴 ADC 어레이를 위해 하나의 픽셀 폭과 동일한 10㎛ 컬럼 폭 내에 2개의 스위치드 커패시터 적분기와 단일 비트 비교기로 구현하였다. 또한, 모든 컬럼의 모듈레이터를 동시에 구동하기 위한 주변 회로인 비중첩 클록 발생기 및 바이어스 회로를 구성하였다. 제안된 델타-시그마 모듈레이터는 110nm CMOS 공정으로 구현하였으며 12kHz 대역폭에 대해 418의 oversampling ratio (OSR)로 88.1dB의 signal-to-noise-and-distortion ratio (SNDR), 88.6dB의 spurious-free dynamic range (SFDR) 및 14.3비트의 effective-number-of-bits (ENOB)을 달성하였다. 델타 시그마 모듈레이터의 면적 및 전력 소비는 각각 970×10 ㎛2 및 248㎼이다.