• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.61-67
• /
• 2021

With the recent development of bathemetry technology, the hydrographic surveying method has been changed from single beam depth device use to multi beam acoustic sounding technology. Also, various studies have been reported to obtain high accuracy and precision in the process of river bed topographic data. Especially south korea is geographically on three sides of the sea and the river topography is very developed. To build information about the underwater, and riverbed status, the public investigations has been continuously progressed. In this study, We investigasted the riverbed topography near Baeckma river leisure park. for this purpose, In this study, as the first preliminary survey, location of navigational dangerous objects and reefs and the dangerous areas are identified. Also, ground control points is selected for the optimal GPS surveying. Secondary, through test surveying the Gain, TVG, and pulse length are determined. In addition, the investigation of dangerous objects for navigation is also conducted. As the last step, the error analysis are conducted for the acquired data, and this process involves the removal and adjustments of errors. This section includes the analysis of tide level and navigational contributions, and finally generates a submarine topographic map.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.821-834
• /
• 2017

This paper reports on a single-inductor multiple-output step-up converter with digital control. A systematic analog-to-digital-controller design is explained. The number of digital blocks in the feedback path of the proposed converter has been decreased. The simpler digital pulse-width modulation (DPWM) architecture is then utilized to reduce the power consumption. This architecture has several advantages because counters and a complex digital design are not required. An initially designed unit-delay cell is adopted recursively for the construction of coarse, intermediate, and fine delay blocks. A digital limiter is then designed to allow only useful code for the DPWM. The input voltage is 1.8 V, whereas output voltages are 2 V and 2.2 V. A co-simulation was also conducted utilizing PowerSim and Matlab/Simulink, whereby the 55 nm process was employed in the experimental results to evaluate the performance of the architecture.

• Journal of Digital Policy
• /
• v.2 no.3
• /
• pp.1-7
• /
• 2023

In this paper, I proposes a method for performing single image super resolution by separating texture-spatial domains and then classifying features based on detailed information. In CNN (Convolutional Neural Network) based super resolution, the complex procedures and generation of redundant feature information in feature estimation process for enhancing details can lead to quality degradation in super resolution. The proposed method reduced procedural complexity and minimizes generation of redundant feature information by splitting input image into two channels: texture and spatial. In texture channel, a feature refinement process with step-wise skip connections is applied for detail restoration, while in spatial channel, a method is introduced to preserve the structural features of the image. Experimental results using proposed method demonstrate improved performance in terms of PSNR and SSIM evaluations compared to existing super resolution methods, confirmed the enhancement in quality.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.483-489
• /
• 2014

In this study, experiments were conducted for micro pattern printing to combine solution atomization process and stencil printing based on electrospray deposition. The stencil mask fabricated by etching the photosensitive glass placed below 0.3 mm distance to substrate has 100 um line width. The process parameters of electrospray deposition system for the atomization of the solution are applied voltage and supply flow rate of the solution. Meniscus angle of cone-jet was optimized by varying the supply flow rate from 0.3 ml/hr to 0.7 ml/hr. Voltage condition was verified having symmetric cone-jet angle and no pulsation at 8.5 kV applied voltage. In addition, a number of micro patterns are printed using a single 1 step process by solution atomization process. Variable line width of approximate 100 um was confirmed by changing conditions of solution atomization regardless of the pattern size of stencil mask.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.464-464
• /
• 2010

A few years ago, for maintaining high stability and production yield of production equipment in a semiconductor fab, on-line monitoring of wafers is required, so that semiconductor manufacturers are investigating a software based process controlling scheme known as virtual metrology (VM). As semiconductor technology develops, the cost of fabrication tool/facility has reached its budget limit, and reducing metrology cost can obviously help to keep semiconductor manufacturing cost. By virtue of prediction, VM enables wafer-level control (or even down to site level), reduces within-lot variability, and increases process capability, $C_{pk}$. In this research, we have practiced VM on $SiO_2$ etch rate with optical emission spectroscopy(OES) data acquired in-situ while the process parameters are simultaneously correlated. To build process model of $SiO_2$ via, we first performed a series of etch runs according to the statistically designed experiment, called design of experiments (DOE). OES data are automatically logged with etch rate, and some OES spectra that correlated with $SiO_2$ etch rate is selected. Once the feature of OES data is selected, the preprocessed OES spectra is then used for in-situ sensor based VM modeling. ICP-RIE using 葰.56MHz, manufactured by Plasmart, Ltd. is employed in this experiment, and single fiber-optic attached for in-situ OES data acquisition. Before applying statistical feature selection, empirical feature selection of OES data is initially performed in order not to fall in a statistical misleading, which causes from random noise or large variation of insignificantly correlated responses with process itself. The accuracy of the proposed VM is still need to be developed in order to successfully replace the existing metrology, but it is no doubt that VM can support engineering decision of "go or not go" in the consecutive processing step.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.69-72
• /
• 2021

Various studies for QLEDs using inkjet printing has been actively conducted. Multilayers in QLEDs need an orthogonal process inevitably using different solvents and it makes the inkjet printing process more difficult and expensive. Therefore, coating two layers in a single process can reduce the fabrication step, resulting in the process time. In this study, we fabricated QLEDs of standard structure using a mixture of emission layer and hole transport layer. The mixed layer was fabricated by dissolving TFB and QDs in chlorobenzene, and the maximum luminance of the device was 45,850 cd/m². It shows the bright future of the electroluminescence devices applied with inkjet printing process.

• Journal of Music and Human Behavior
• /
• v.17 no.1
• /
• pp.1-24
• /
• 2020

The internship is essential for the music therapy curriculum and affords interns the opportunity to apply their classroom-based knowledge and skills to real-world clinical settings. However, challenges associated with the internship can result in interns undergoing trial-and-error learning, interpersonal conflicts, and intrapersonal difficulties. An experiential music therapy group may be useful in helping interns process these incidents and develop their personal and professional skills. We explored the experiences of music therapy interns participating in therapeutic song writing. In this study, five music interns completed two 4-hour sessions of therapeutic song writing. Following the second session, a group interview was conducted with participants to gather data on their experiences. The interview was recorded, transcribed, and analyzed. Six themes and 18 sub-themes were derived from the data. The six themes were preconceptions of therapeutic song writing, meaningful lyric creation, challenges in song composition, structured experiences during song writing process, development of self-awareness through music, and relational experiences resulting from the group process. Participants were able to incorporate their individual internship experiences into a single song by communicating with group members during the step-by-step process. Participation in therapeutic song writing was found to help music therapy interns identify and process challenges encountered during their internship and further their personal and professional development.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.86-91
• /
• 1999

We have fabricated high-$\textrm{T}_c$ superconducting $\textrm{YBa}_{2}\textrm{Cu}_{3}\textrm{O}_{7-x}$(YBCO) grain boundary junctions at a step-edge on (001) $\textrm{SrTiO}_3$(STO) substrates. A diamond-like carbon (DLC) film grown by plasma enhanced chemical vapor deposition were used as an ion milling mask to make steps on the STO (100) single crystal and was removed by an oxygen reactive ion etch process. The c-axis oriented YBCO and TO thin films were deposited epitaxially on the STO substrate with a step-edge by pulsed laser deposition. The grain boundary junctions were formed at the top and the bottom of the step. The junctions worked at temperatures above 77 K, and had I\ulcornerR\ulcorner products of 7.5mV at 16K and 0.3 mV at 77K, respectively. The I-V characteristics of these junctions showed the shape of the two noisy resistively shunted junction model.

• The KIPS Transactions:PartD
• /
• v.10D no.4
• /
• pp.591-602
• /
• 2003

Delay and discontinuance phenomenon of service are cause by sudden increase of the network communication amount and the quantity consumed of resources when Internet users are driven excessively to a conventional single large database sewer. To solve these problems, spatial database cluster consisted of several single nodes on high-speed network to offer high-performance is risen. But, research about spatial join operation that can reduce the performance of whole system in case process at single node is not achieved. So, in this paper, we propose efficient parallel spatial join processing method in a spatial database cluster system that uses data partitions and replications method that considers the characteristics of space data. Since proposed method does not need the creation step and the assignment step of tasks, and does not occur additional message transmission between cluster nodes that appear in existent parallel spatial join method, it shows performance improvement of 23% than the conventional parallel R-tree spatial join for a shared-nothing architecture about expensive spatial join queries. Also, It can minimize the response time to user because it removes redundant refinement operation at each cluster node.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.66-80
• /
• 1997

Pinus koraiensis is one of the major speciese which have been recently planted for ten years and consists of 31% of total plantation. Presently young stand less than 30 years consists of 87% of total forest, but tending thinning of it is hardly carried out and the desirable direction for the thinning is not established yet. The objective of the study is to introduce the optimum thinning plan and thinning method through the long-run experiment of tending thinning for the Pinus koraiensis stand. The experiments carry out to interprete its growth model on the subject of two thinning experimental plots and yield table of Pinus koraiensis. As the basic step for understanding the thinning process, a theoretical growth model which is suitable to express the growth process is required. For that purpose, three growth functions (Mitscherlich, 4 parameter Richards, 3 parameter Richards) are applied to the diameter growth of the sample trees which are taken in the two plots. The results show that 3 parameter Richards is the most suitable. It is also verified that the diameter growth, the height growth, and the decrease in the number of stocks can be estimated by this function. To estimate the growth change of single tree, growth model including parameter h which is related to the occupation area of single tree are introduced. The parameter h can be estimated by using the data of the diameter growth obtained from the established experimental plots. Therefore, if both verification and modification of the usefulness of the model suggested is made, equations which tell about the thinning effects could be drived by estimating the growth process of single tree in advance.