• 대한건축학회논문집:계획계
• /
• 제35권12호
• /
• pp.55-64
• /
• 2019

The purpose of this study was to analyze the affection of plan configuration on human emotion using Virtual Reality. A total of four different plan configuration was selected according to the prior study and built using Virtual Reality. The EEG was measured and then calculated using FFT to measure human emotion in different plan configurations. The measurements were shown to lead there was a significant statistical difference in four types of brainwaves between the plan types(p<0.05). This indicates that there is a possibility of plan configuration may exacerbate psychological disorder among single-person household and suggests that it is possible to counteract those stress among single-person household by changing the plan configuration in the earlier designing stage.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1434-1437
• /
• 2011

Precision measurement of silicon wafer resistivity has been using single-configuration Four-Point Probe(FPP) method. This FPP method have to applying sample size, shape and thickness correction factor for a probe pin spacing to precision measurement of silicon wafer. The deference for resistivity measurement values applied correction factor and not applied correction factor was about 1.0 % deviation. The sample size, shape and thickness correction factor for a probe pin spacing have an effects on precision measurement for resistivity of silicon wafer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.267-269
• /
• 2003

반도체 웨이퍼 및 각종 박막의 면/비저항(sheet/resistivity resistance)의 측정에 비교적 간단히 측정할 수 있고 측정정확도가 높은 4탐침(four-point probe)방법이 널리 사용되고 있다 또한 4탐침 측정방법은 높은 분해능의 contour map작성과 ion implantation의 doping accuracy 및 doping uniformity의 측정에도 사용된다. 최근 재료의 소형, 박막화 경향으로 볼 때 정확한 비저항 측정의 필요성이 요구되고 있으며 이에 따라 4탐침 측정기술인 single 및 dual configuration method로 실리콘 웨이퍼에 대한 비저항의 측정 정확도를 고찰한 결과 dual configuration 측정방법이 single configuration측정 방법에 비하여 정밀 정확도가 더 좋은 것으로 고찰되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.929-930
• /
• 2007

박막재료 및 반도체의 면저항 측정에는 주로 Four Point Probe(FPP) 원리를 이용한 측정기를 사용하고 있다. FPP에 의한 측정방식은 single 및 dual configuration method가 있으며, dual configuration은 single configuration에 비해 probe spacing 변화나 시료의 가장자리 효과 등에서 측정편차가 적은 장점이 있어서 dual configuration 기술을 사용하는 추세이다. 개발된 휴대용 면저항 측정기는 dual configuration원리를 적용하여 제작되었으며, 박막재료의 면저항을 누구나 쉽고 정확하게 측정할 수 있도록 설계되었다. 또한 시료의 크기가 핀 간격에 비해 5배 이상 크면 보정계수를 거의 무시할 수 있는 장점이 있어 작은 시료라도 정확한 면저항을 측정할 수 있다. 이측정기의 측정 불확도는 지시값의 1 % 이하이고, 측정범위는 (2$\sim$2000)$\Omega/sq$이다.

• 수산해양기술연구
• /
• 제42권1호
• /
• pp.44-53
• /
• 2006

The expansion of near shore aquaculture is feasibility of moving aquaculture facilities into the open ocean. Numerical modeling technique using finite element method was used to enable the optimum design and evaluation of submersible aquaculture cage system. The characteristics of mooring loads response in mooring lines under waves and current and their response amplitude operators were calculated for single and three point mooring configuration at the surface condition and submerged one. The static mooring loads without wave and current loading were similar for both the surface and submerged configuration. It was calculated that three point mooring was more adequate than single point mooring for the mooring configuration of submersible aquaculture cage system. The wave induced response amplitude operators for the single point mooring configuration with the influence of currents were identical to those without the influence of currents.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1045-1046
• /
• 2011

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.233-234
• /
• 2009

박막 재료의 면저항 측정은 일반적으로 FPP(Four-Point Probe)원리를 적용한 측정기률 사용하고 있다. 개발된 면저항 측정기의 특징은 dual configuration 기술을 적용하여 탐침 간격에 대한 시료의 크기 및 두께에 대한 보정계수를 고려하지 않아도 되므로 누구나 업고 정확하게 사용 할 수 있다. 측정범위는 $1\;m{\Omega}{/\square}\;{\sim}\;1\;G{\Omega}{/\square}$이며, 반복성과 재현성 및 직선성은 0.1 %이하로서 우수한 특성을 나타냈다. 또한 기존의 면저항 측정기에 적용된 single configuration 기술에서 나타나는 가장자리 효과의 단점을 dual configuration 기술을 적용하여 해결하였고 정밀 정확도를 향상시켰다. 개발된 면저항 측정기의 특성평가는 국가측정표준으로부터 소급성이 유지된 표준저항, 분할저항기, 면저항 인증표준물질 등을 사용하였다.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.423-427
• /
• 2010

Portable sheet resistance-measuring instrument using the dual-configuration Four-Point Probe method is developed for the purpose of precisely measuring the sheet resistance of conducting thin films. While single-configuration Four-Point Probe method has disadvantages of applying sample size, shape and thickness corrections for a probe spacing, the developed instrument has advantages of no such corrections, little edge effects and measuring simply and accurately the sheet resistance between $0.2\Omega/sq$ and $2k\Omega/sq$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.62-64
• /
• 1995

This paper describes the characteristics of electromagnetic forces of Combined superconducting maglev system. Generation of the levitation, the propulsion and the guidance force by a single coil is proved by the phasor- analysis. It is also shown that double-layered configuration has better characteristics in efficiency, pulsation of the forces and drag ratio than single-layered configuration.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.6-10
• /
• 2005

PIV(Particle image velocimetry) presents the flow velocity of whole flow fields in a fraction of a second. Conventional PIV method uses two optical axis configuration during the image grabbing process. That is, the illumination plane and the recording plane must be parallel. This configuration is very natural to grab the whole field without the image distortion. In the real problem, it is often to meet the situation which this configuration is hard to be fulfilled. In this study, we developed new PIV method which only uses single optical axis to grab the particle images. This new PIV method become possible by utilizing the scanning method similar to echo PIV technique. One particle image of scanning PIV consists of scanned several line images and by repeating this scanning process, two particle images were grabbed and processed to produce the velocity vectors.