• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1321-1323
• /
• 2005

SRM has a characteristic of a robust, simple structure and wide operating ranges. So, recently it has studied and developed in many kinds and forms with the technology of power electronics and analysis and design by use of computer. Also, It is used in a very wide range of industrial applications. In particular, single phase switched reluctance motor has a merit in practical use because it has simple operating drives and control systems, very high energy density per unit volume comparing with three phase SRM. But it must have a starting device. In this paper, the shapes of the single phase SRM rotor are designed to reduce the torque ripple, to improve the efficiency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.242-245
• /
• 2000

In this paper, we present a color interpolation technique based on artificial neural networks for a single-chip CCD (charge-coupled device) camera with a Bayer color filter array (CFA). Single-chip digital cameras use a color filter array and an interpolation method in order to regenerate high quality color images from sparsely sampled images. We applied 3-layer feedforward neural networks in order to interpolate missing pixel from surrounding pixels. And we compared the proposed method with conventional interpolation methods such as the proposed interpolation algorithm based on neural networks provides a better performance than the conventional interpolation algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.101-103
• /
• 2004

The single phase switched reluctance motor has many merits in practical use because it has simple operating drives and control systems, very high energy density per unit volume comparing with three phase SRM. But it has also problems which is a starting device and torque ripple. One of the major problems is torque ripple which causes increased undesirable acoustic noise and possibly speed ripple. This paper describes an approach to determine optimum magnetic circuit parameters to minimize the torque ripple.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권7호
• /
• pp.2972-2991
• /
• 2016

WLAN is the best choice in the place where complex network is hard to set up. Intelligent terminals are more and more assembled in some areas now. However, according to IEEE 802.11n/802.11ac, the access-point (AP) can only serve one user at a single frequency channel. The spectrum efficiency urgently needs to be improved. In theory, AP with multi-antenna can serve multiple users if these users do not interfere with each other. In this paper, we propose a user clustering scheme that could achieve multi-user selection through the mutual cooperation among users. We focus on two points, one is to achieve multi-user communication with multiple antennas technique at a single frequency channel, and the other one is to use a way of distributed users' collaboration to determine the multi-user selection for user clustering. Firstly, we use the CSMA/CA protocol to select the first user, and then we set this user as a source node using users' cooperation to search other proper users. With the help of the users' broadcast cooperation, we can search and select other appropriate user (while the number of access users is limited by the number of antennas in AP) to access AP with the first user simultaneously. In the network node searching, we propose a maximum degree energy routing searching algorithm, which uses the shortest time and traverses as many users as possible. We carried out the necessary analysis and simulation to prove the feasibility of the scheme. We hope this work may provide a new idea for the solution of the multiple access problem.

• 디지털융복합연구
• /
• 제12권3호
• /
• pp.227-235
• /
• 2014

모바일 가상화는 두 개의 가상 플랫폼을 하나의 무선 장치에 탑재하는 모바일 장치 관리의 한 접근 방법이다. 단일 무선 장치인 스마트폰은 사업용과 개인용으로의 가상 환경으로 사용될 수 있을 것이다. 모바일 가상화는 또한 동일한 장치에 두 개의 운영체제인 RTOS와 안드로이드 앱이 동시에 수행되는 환경일 수 있다. 본 논문에서는 멀티코아에서 각 코아를 가상화하고, 물리 CPU(pCPUs)에 배당된 여러 가상 CPU(vCPU)를 재 할당하는 기법을 제시하며 또한 가상 CPU들을 물리 CPU에 할당하기 위한 실시간 스케줄링 방법을 제안한다. 본 논문에서 제안된 기술은 인터럽트 처리시에 실시간 처리의 시간 지연을 해결하였고, 이전의 알고리즘보다 빠른 처리를 가능하게 한다.

• Transactions on Electrical and Electronic Materials
• /
• 제4권4호
• /
• pp.26-29
• /
• 2003

To discover electrical properties of individual single wall nanotube(SWNT), a number of SWNT-based tubeFETs have been fabricated. The device consists of a single semiconducting SWNT on an insulating substrate, contacted at each end by metal electrodes. It presents high transconductances, and charge storage phenomenon, which is the operations of injecting electrons from the nanotube channel of a tubeFET into charge traps on the surface of the $SiO_2$ gate dielectric, thus shifting the threshold voltage. This phenomenon can be repeated many times, and maintained for the hundreds of seconds at room temperature. We will report this phenomenon as the memory effects of the SWNT, and attempt to use this property for the memory device.

• Journal of Mechanical Science and Technology
• /
• 제20권3호
• /
• pp.297-309
• /
• 2006

This paper deals with a novel structure for single-cell characterization which makes use of bimorph micro thermal actuators combined with electrical sensor device and integrated microfluidic channel. The goal for this device is to capture and characterize individual biocell. Quantitative and qualitative characteristics of bimorph thermal actuator were analyzed with finite element analysis methods. Furthermore, optimization for the dimension of cantilevers and integrated parallel probe systems with microfluidic channels is able to be realized through the virtual simulation for actuation and the practical fabrication of prototype of probes. The experimental value of probe deflection was in accordance with the simulated one.

• 센서학회지
• /
• 제14권4호
• /
• pp.286-290
• /
• 2005

We have demonstrated a refractometer for liquid based on a side-polished fiber. The device consists of a side-polished single mode fiber and a rectangular space which plays a role of the multimode planar waveguide when it is infused with a liquid. We presented a simple method to acquire the refractive index of a liquid by use of the spacings of periodic resonance wavelengths of the device. The resolution of the fabricated refractometer was order of $10^{-5}$

• 대한의용생체공학회:의공학회지
• /
• 제26권3호
• /
• pp.163-169
• /
• 2005

Respiratory tubes with a length of 35mm and diameters of 10, 15, and 20mm were made for experimental purpose, and both the static$(P_s)\;and\;dynamic(P_D)$ pressures were simultaneously measured for steady flow rates ranging 1-12//sec. Least squares analysis resulted successful fitting of $P_s\;and\;P_D$ data with quadratic equations with correlation coefficients higher than 0.99(P<0.0001). The spirometric measurement standards of the American Thoracic Society(ATS) were applied to $P_s$ data, which demonstrated the smallest tube diameter of 15mm to satisfy the ATS standards. The maximum $P_D$ value of the velocity type transducer(the functional single use respiratory air flow tube) with the diameter of 15mm was estimated to be approximately $75cmH_2O$, implying more than 7 times larger sensitivity than the widely used pneumotachometers. These results showed that the velocity type respiratory air flow transducer is a unique device accomplishing miniaturization with the sensitivity increased, thus would be of great advantage to develop portable medical devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1575-1577
• /
• 2009

We have investigated the characteristics of transparent indium zinc oxide(IZO)/Ag/IZO multilayer electrode grown on polyethylene terephthalate (PET) substrates using a specially designed roll-to-roll sputtering system for use in flexible device are described. By the continuous R2R sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, we were able to fabricate an IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 ${\Omega}$/square, optical transmittance of 87.4 %, and figure of merit value of 42.03 10-3 ${\Omega}$-1. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the RTR sputter grown single ITO electrode, due to the existence a ductile Ag layer between the IZO layers. This indicates that the RTR sputtered IZO-Ag-IZO multilayer is a promising flexible electrode that can substitute for the conventional single ITO electrode grown by bath type sputtering for use in low cost flexible device, due to its low resistance, high transparency, superior flexibility and fast preparation by the R2R process.