• 한국ITS학회 논문지
• /
• 제7권5호
• /
• pp.90-96
• /
• 2008

본 논문은 텔레메틱스 단말용 음성인식을 위한 음성향상 단일 칩 알고리듬을 제시한다. 제안된 방법은 잡음제거와 에코제거의 두 단계로 구성되어 있으며, 첫 단계로 크로스 스펙트럼 추정에 기반한 적응필터를 통해 에코를 제거하고, 두번째 단계로 Generalized Gamma분포기반의 LSA 음성추정 방식 추정을 통해 외부 배경잡음을 제거하여 음성의 음질을 향상시킨다. 적은 계산량이 요구되는 제안된 알고리즘을 토대로 구현된 단일 칩의 성능은 다양한 잡음환경에서 신호 대잡음비율과 음성인식 평가에서 기존의 방법보다 향상된 결과를 나타내었다.

• 정보보호학회논문지
• /
• 제27권2호
• /
• pp.383-395
• /
• 2017

뇌파 기반 사용자 인증기술은 최근에 스마트폰, 금융 등 다양한 분야에서 사용되고 있는 지문인식 등의 기존 생체인식 인증기술과 비교해볼 때 가변성, 유출 저항성 등의 장점이 있다. 이러한 장점에도 불구하고 사용자로부터 인증에 필요한 뇌파를 수집하기 위해 필요한 장비의 경제성과 뇌파 수집 행위의 편의성 문제 때문에 뇌파 기반 사용자 인증기술이 실제 환경에서 사용되지는 못했다. 최근 하드웨어 기술의 발전으로 휴대성과 통신 기능을 갖춘 간소화 된 형태의 뇌파 수집 기기들의 개발로 인해 뇌파를 활용한 인증기술에 대한 관련 연구가 활발히 진행되어왔다. 그러나 본 논문에서 가장 간소화된 형태인 단일 채널 뇌파 측정기기를 통해 수집된 뇌파 샘플들을 대상으로 수행된 실험에 따르면 뇌파 수집 채널 수 감소에 따라 인증정확도의 감소 현상이 있는 것으로 파악되었다. 따라서 본 논문에서는 뇌파 기반 사용자 인증기술의 실용화를 위해 해결해야 할 기술적 문제점에 대해 분석하고 이를 위해서 점진적 뇌파 샘플 제거 방법을 통해 각 사용자의 인증에 유효한 뇌파 샘플 집합을 구성하는 방법을 제안한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권5호
• /
• pp.211-217
• /
• 2001

In this paper, we have developed the 6 DOF force display system to be based on the single PC. The system is composed of the force display device, the force reflecting rendering algorithm and the high-speed controller. The previous systems had a problem, that must adopt high performance workstation or 2-PC in order to control the graphics speedily and stably. In this paper, it is possible to improve the problem as to develop its exclusive controller and new rendering algorithm. The proposed new rendering algorithm is based on the Proxy algorithm, which can convert information of the position, the velocity, and the haptic information into the force-data. Especially, as to use the proxy algorithm, we can construct dynamical virtual-environment with the elasticity, the viscosity, the mass, and the friction force. As the result of the experiment, we found that our system has much superior characteristics than some other haptic interfaces, because it can control of 30,000 polygon model constructed virtual object with 1[kHz] haptic interrupt cycle and 20[Hz] graphic interrupt cycle in the single PC based system.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.389-390
• /
• 1996

The CCDs are widely used in astronomical observations either in direct imaging use or spectroscopic mode. However, the areas of available sensors are too small for large imaging format. One possibility to obtain large detection area is to assemble mosaics of CCD, and drive them simultaneously. Parallel driving of many CCDs together rules out the possibility of individual tuning; however, such optimisation is very important, when the ultimate low light level performance is required, particularly for new, or mixed devices. In this work, a new concept is explored for an entirely novel approach, where the drive waveforms are multiplexed and interleaved. This simultaneously reduces the number of leadout connections and permits individual optimisation efficiently. The digital controller can be designed within a single EPLD (Erasable Programmable Logic Device) chip produced by a CAD software package, where most of the digital controller circuits are integrated. This method can minimise the component. count., and improve the system efficiency greatly, based on earlier works by Han et a1. (1996, 1994). The system software has an open architecture to permit convenient modification by the user, to fit their specific purposes. Some variable system control parameters can be selected by a user with a wider range of choice. The digital controller design concept allows great flexibility of system parameters by the software, specifically for the compatibility to deal with any number of mixed CCDs, and in any format, within the practical limit.

• 한국재료학회지
• /
• 제18권5호
• /
• pp.277-282
• /
• 2008

The effects of the field emission property in relation to the surface morphology and adhesion force were investigated. The single-wall-nanotube-based cathode was obtained by use of an in-situ arc discharge synthesis method, a screen-printing method and a spray method. The morphologies of the formed emitter layers were very different. The emission stability and uniformity were dramatically improved by employing an in-situ arc discharge synthesis method. In this study, it was confirmed that the current stability and uniformity of the field emission of the cathode depend on the surface morphology and adhesion force of the emitters. The current stability of the field emission device was also studied through an electrical aging process by varying the current and electric field.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권6호
• /
• pp.697-705
• /
• 2014

A single chip Programmable AC to DC Power Converter, consisting of wide band gap SiC MOSFET and SiC diodes, has been proposed which converts high frequency ac voltage to a conditioned dc output voltage at user defined given power level. The converter has high conversion efficiency because of negligible reverse recovery current in SiC diode and SiC MOSFET. High frequency operation reduces the need of bigger size inductor. Lead inductors are enough to maintain current continuity. A complete electrical analysis, die area estimation and thermal analysis of the converter has been presented. It has been found that settling time and peak overshoot voltage across the device has reduced significantly when SiC devices are used with respect to Si devices. Reduction in peak overshoot also increases the converter efficiency. The total package substrate dimension of the converter circuit is only $5mm{\times}5mm$. Thermal analysis performed in the paper shows that these devices would be very useful for use as miniaturized power converters for load currents of up to 5-7 amp, keeping the package thermal conductivity limitation in mind. The converter is ideal for voltage requirements for sub-5 V level power supplies for high temperatures and space electronics systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.67-69
• /
• 2004

This thesis attempts to investigate and analyze the structure of educational simulation devices implemented thus far. conducting a close analysis of their strengths and weaknesses. On this basis the author Presents and implements a new method of simulation, and continuously upgrades it for increased stability and convenience. The most important aspects of the educational simulation device described in this thesis are: first removing the editing function (scenarios. single line diagrams, and point DB), which the instructor finds time-consuming and inconvenient to use; second, developing and installing the program so as to calculate electric power flow that can measure fluctuations measurements after changing the system status; and third. implementing a Client/server mode to build a system that will make it possible to train many people at a time in remote locations. When compared to simulation devices of the Psst. the greatest differences are that algorithm-based scenarios make scenario inputs unnecessary. and that the amount of work required for the point DB and single line diagrams were minimized.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.93-98
• /
• 2019

Recently, with the development of the aerospace and automotive industries, the demand for high-melting-point materials has increased. However, high-melting-point materials are difficult to cut through conventional machining methods. Thermally assisted machining (TAM) is a method for improving the machinability by preheating the materials. A laser, the most commonly used device for TAM, has high efficiency through local preheating but is not sufficient for maintaining a high preheating temperature due to rapid cooling. However, the use of multi-heat sources can supplement the disadvantage of a single heat source. The high preheating temperature can be maintained with a wide and deep heat-affected zone (HAZ) by multi-heat sources. The purpose of this study is to analyze the preheating effects of multi-heat sources using laser plasma. Thermal analysis and preheating experiments were carried out. As a result, the high preheating effect of multi-heat sources compared with a single heat source was verified.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.46-51
• /
• 2006

In order to utilize the refrigerants condensation heat of condenser on the absorption chiller system, the solution cooling condenser(SCC) were proposed, which weak solution of absorber outlet use as a cooling water. As the UA of the solution cooling condenser increased, increasement of COP is about maximum 0.09 in occasion of single effect and is about maximum 0.08 in occasion of double effect series flow. In the case of heat exchanger efficiency is about 0.85, it's increments are 0.08 and 0.072, each. And solution cooling condenser is a more effective device in the single effect absorption system more than double effect system for the principle of operation. In order to increases the heat of solution cooling condenser, if reduce the flow rate of cooling water or the value of UA, it makes COP increase a little, but it brought COP decrease because of increasing the pressure of system.

• Structural Engineering and Mechanics
• /
• 제69권4호
• /
• pp.467-477
• /
• 2019

Digital image correlation (DIC) is now a popular and extensively used full-field metrology technique. In general, DIC is performed by using a turnkey solution offered by various manufacturers of DIC. In this paper, a simple and economical set-up for DIC is proposed which uses easily accessible digital single-lens reflex (DSLR) camera rather than industrial couple-charged device (CCD) cameras. The paper gives a description of aspects of carrying a DIC experiment which includes experimental set-up, specimen preparation, image acquisition and analysis. The details provided here will be helpful to carry DIC experiments without specialized DIC testing rig. To validate the responses obtained from proposed DIC set-up, tension and fatigue tests on specimens made of IS 2062 Gr. E300 steel are determined. Tensile parameters for a flat specimen and stress intensity factor for an eccentrically-loaded single edge notch tension specimen are evaluated from results of DIC experiment. Results obtained from proposed DIC experiments are compared with those obtained from conventional methods and are found to be in close agreement. It is also noted that the high resolution of DSLR allows the use of proposed approach for fracture characterization which could not be carried out with a typical turnkey DIC solution employing a camera of 2MP resolution.