• 대한소아치과학회지
• /
• 제44권1호
• /
• pp.20-27
• /
• 2017

본 연구는 포졸란 시멘트를 기반으로 하는 근관전색제인 Endoseal MTA (Maruchi, Wonju, Korea)를 근관전색제와 근관충전제로 사용하였을 때 나타나는 치근단부 미세누출을 기존의 근관전색제인 AH $Plus^{(R)}$ (Dentsply DeTrey, Konstanz, Germany)와 비교하여 평가하고자 하였다. 만곡되지 않은 영구 전치를 3개의 실험군(A군, E1군, E2군)으로 나누고 A군은 AH $Plus^{(R)}$와 gutta-percha (GP), E1군 은 Endoseal MTA와 GP, E2군은 Endoseal MTA 단독으로 충전하였다. 충전이 완료된 치아는 완전한 경화를 위해 24시간동안 멸균 증류수에 보관하였고 염색액 누출을 위해 치근단 부위를 0.2% 로다민 B 염색 용액에 24시간 동안 노출시켰다. 입체 현미경을 이용하여 미세누출 정도를 평가하였으며 3개의 실험군 사이에 유의한 차이가 관찰되지 않았다. 결론적으로 Endoseal MTA는 GP의 사용에 관계 없이 AH $Plus^{(R)}$와 유사한 밀폐력을 보였으며 이러한 결과는 Endoseal MTA의 근관전색제 및 근관 충전제로써 유용한 사용에 대한 가능성을 제시한다.

• 치과방사선
• /
• 제28권2호
• /
• pp.471-489
• /
• 1998

For the successful endodontic treatment, root canal should be cleaned thoroughly by accurate mechanical and chemical canal preparation and sealed completely with canal filling material without damaging the periapical tissues. The accuracy of the root canal length measurement is a prerequisite for the success of the endodontic treatment, and the root canal length is often determined by the standard periapical radiographs and digital tactile sense. In this study, the accuracy and the clinical usefulness of Digora/sup (R)/, an intraoral digital imaging processor and the conventional standard radiographs were compared by measuring the length from the top of the file to the root apex. 30 single rooted premolars were invested in a uniformly sized blocks and No.25 K-file was inserted into and fixed in each canal. Each block was placed in equal distance and position to satisfy the principle of the bisecting angle and paralleling techniques and Digora/sup (R)/ system's image and standard periapical radiographs were taken. Each radiograph was examined by 3 different observers by measuring the length from top of the file to the root apex and each data was compared and analyzed. The results were as follows; 1. In the bisecting angle technique, the average difference between the Digora/sup (R)/ system and standard periapical radiograph was 0.002 mm and the standard deviation was 0.341 mm which showed no statistically significant difference between the two systems(p>0.05). Also, in the paralleling technique, the average difference between these two system was 0.007 mm and the standard deviation was 0.323 mm which showed no statistically significant difference between the two systems(p>0.05). 2. In Digora/sup (R)/ system, the average difference between the bisecting angle and paralleling technique was -0.336 mm and the standard deviation was 0.472 mm which showed a statistically significant difference between the two techniques(p<0.05). Also, in the standard periapical radiographs, the average difference between the bisecting angle and paralleling technique was 0.328 mm and the standard deviation was 0.517 mm which showed a statistically significant difference between these two techniques(p<0.05). 3. In Digora/sup (R)/ system and the standard periapical radiographs. there was a statistically significant difference between the measurement using the bisecting angle technique and the actual length(p<0.05), But there was no statistically significant difference between the measurement using the paralleling technique and the actuallength(p>0.05). In conclusion. the determination of the root canal length by using the Digora/sup (R)/ system can give us as good an image as the standard periapical radiograph and using the paralleling technique instead of the bisecting angle technique can give a measurement closer to the actual canal length. thereby contributing to a successful result. Also. considering the advantages of the digital imaging processor such as decreasing the amount of exposure to the patient. immediate use of the image. magnification of image size. control of the contrast and brightness and the ability of storing the image can give us good reason to replace the standard periapical radiographs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.924-925
• /
• 2008

There are many types of grid-connected inverter controllers, PI controller based is the most popular methods. But, a common PI control is produced zero-steady state error and phase delay in sinusoidal reference. Synchronous reference frame or DQ transform based controller is capable for reducing both of zero-steady state error and phase delay is. But DQ transform based controller has cross-coupling component which difficult to analyze the system in single phase model. In this paper, to obtained single phase model of the system, DQ transform based controller is analyzed in two techniques. The first is by neglecting cross-coupling. The second is eliminated cross-coupling component by decoupling method. By these two techniques, single phase model is obtained. Then, the single phase model is analyzed to evaluate its performance in stability and frequency response, through Root Locus and Bode diagram, respectively. MATLAB and PSIM simulation is used to verify the analysis. Simulation result is shown; cross-coupling component has no significant influent to the controller.

• Mycobiology
• /
• 제37권3호
• /
• pp.225-229
• /
• 2009

Single spore isolates of Plasmodiophora brassicae e4 and e9 obtained from diseased Chinese cabbage were identified as race 4 and race 9, respectively, by the Williams' differential variety set. To confirm the possibility of variation in same generation and progeny of a single spore isolate of P. brassicae, random amplified polymorphic DNA (RAPD) analysis was conducted using the URP 3, 6 and OPA 7 primers. There was no difference in band type at each part of the gall of Chinese cabbage obtained by inoculation of e4 and e9 and amplification using the URP 3 and 6 primers when the same generation was analyzed. In addition, the progeny analysis, which was expanded to the third generation and conducted using the URP 3 and OPA 7 primers, revealed no differences in the band type of the e4 isolate. Based on these results, the single spore isolate of P. brassicae was genetically stable.

• Toxicological Research
• /
• 제27권4호
• /
• pp.217-224
• /
• 2011

The object of this study was to evaluate the single oral dose toxicity of platycodin D, a saponin from the root of Platycodon grandiflorum in male and female mice. Platycodin D was administered to female and male mice as an oral dose of 2000, 1000, 500, 250 and 125 mg/kg (body wt.). Animals were monitored for the mortality and changes in body weight, clinical signs and gross observation during 14 days after treatment, upon necropsy, organ weight and histopathology of 14 principle organs were examined. As the results, no platycodin D treatment related mortalities, clinical signs, changes on the body and organ weights, gross and histopathological observations against 14 principle organs were detected up to 2000 mg/kg in both female and male mice. Therefore, $LD_{50}$ (50% lethal dose) and approximate LD of playtcodin D after single oral treatment in female and male mice were considered over 2000 mg/kg - the limited dosages recommended by KFDA Guidelines [2009-116, 2009], respectively.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.187-201
• /
• 1996

The purpose of this study was to evaluate the sealing ability of a calcium hydroxide plug treated with a bonding agent. Ninety extracted human anterior teeth and premolars with single canal were used in this study. Crowns were removed. the canal's were instrumented. and the roots were randomly divided into three groups of 30 each. In control group. a single apical seat was prepared with #60 K file 1mm short of the apex and the root canal was obturated with Gutta-percha and Sealapex by the lateral condensation method. In experimental group 1 and group 2. to prepare an apical isthmus of 1mm in length. the first apical seat was prepared with a #45 K file 1mm short of the anatomical apex and with a #60 K file 2mm short for the second apical seat. Dry calcium hydroxide powders were packed in the apical isthmus with a hand plugger and #60 K file and then. the root canal was obturated with Gutta-percha and Seal apex by the lateral condensation method. In experimental group 2. following an application of the bonding agent to the plug. the root canal was obturated in the same way. The teeth of each group were immersed in a 2% methylene blue dye solution. for 1, 2, and 4 weeks. The distance from the tip of the cone to the deepest penetration was measured using the Tool maker's microscope. The results were as follows : 1. The teeth having the calcium hydroxide plug treated with the dentin bonding agent (experimental group 2) showed the lowest leakage with 1.4705mm and the control group without apical plug(no apical isthmus) showed the highest leakage with 3.1735mm. 2. The control group without apical plug showed higher leakage than experimental group 1 having the calcium hydroxide plug treated without the dentin bonding agent(p>0.05). 3. The control group without apical plug and experimental group 1, having the calcium hydroxide plug treated without the dentin bonding agent. showed higher leakage than experimental group 2. having the calcium hydroxide plug treated with the dentin bonding agent(p<0.001). 4. The immersion time had no significant effect on the degree of leakage. In conclusion, the results showed that the calcium hydroxide plug treated with the dentin bonding agent could decrease the microleakage from the root apex effectively.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.202-217
• /
• 1996

The purpose of this study was to compare the degree of microleakage of Glass-Ionomer root canal sealer possessed several enviable properties with that of the other sealers and to evaluate clinical performance. One hundred twenty single-rooted teeth were used in this experiment. The teeth were cleaned mechanically and immersed for 24 hours in 5.25% sodium hypochlorite and clinical crowns then were removed. After the root canals were instrumented using a step-back technique. one hundred twenty single-rooted teeth were divided into five groups of 24 in each. Group 1 : Tubli-Seal(Kerr Co., MI, U.S.A/ZOE-based), lateral condensation Group 2 : Sealapex(Kerr/Sybron, Romulus, MI/ $Ca(OH)_2$-based), lateral condensation Group 3 : AH 26(De Trey Co., Zurich Switzerland/Resin-based), lateral condensation Group 4 : Ketac-Endo(ESPE GMBH & CO. KG Seefeld:oberbay. Germany/ Glass Ionomer Cement-based), lateral condensation Control group : no sealer. lateral condensation And then. the root canals were obturated by lateral condensation technique with gutta-percha and experimental sealers. The control group were obturated without sealer. The teeth were placed in a vacuum chamber for 15 minutes and immersed 2% methylene blue under vacuum for 15 minutes. The teeth were passively stained for 1 week and 2 weeks and were cleared and evaluated for linear dye leakage using Tool maker's microscope(${\times}200$). The results were as follows: 1. There were statistically significant differences in the degree of dye penetration between the control group and experimental groups(p<0.05). 2. In the experimental groups, Sealapex($1.2871{\pm}0.9180mm$) exhibited the lowest mean value of dye penetration, followed by Ketac-Endo($1.4432{\pm}0.8082mm$), AH 26($1.5030{\pm}0.7752mm$) and Tubli-Seal($1.6458{\pm}1.0292mm$)(p>0.05). 3. There were statistically significant differences in the variation of microleakage between 1 week and 2weeks in Tubli-Seal and Seal apex groups (p<0.05). 4. The degree of dye penetration of all groups were increased as the time elapsed and AH 26 showed the lowest variation(+0.11) and Tubli-Seal(+ 1.03) showed the highest variation (p<0.001).

• 대한소아치과학회지
• /
• 제31권2호
• /
• pp.136-143
• /
• 2004

이중치는 유치열에서 흔히 나타나는 발육 이상으로 후속 영구치의 결손, 융합, 형태 이상 등을 일으킬 수 있다. 본 연구에서는 2003년 1월부터 9월까지 원광대학교 치과병원 소아치과에 내원한 유치열기 및 혼합치열기 어린이 1,803명을 대상으로 유치열에서 나타나는 다양한 유형의 이중치를 악궁에서의 위치에 따라 분류하고 그에 따른 영구치의 발육 이상을 평가하였으며 동시에 이중치의 치관 및 치근의 형태 및 융합 정도에 따라 이중치를 네 가지 유형으로 분류한 Tannenbaum과 Ailing의 기준에 따라 이중치를 분류하고 그에 따른 영향도 평가하여 다음과 같은 결과를 얻었다. 1. 이중치는 49명(2.7%)이었고, 이중 5명의 어린이에서 양측성 이중치를 보이고 있었으며, 세 개의 치관 및 치근을 보이는 삼중치를 갖는 경우도 1명에서 나타났다. 2. 이중치는 하악 치열에서 현저히 높은 빈도로 나타났으며, 하악 유중절치와 유측절치가 융합된 경우 및 하악 유측절치와 유견치가 융합된 경우에서 유사하게 높게 나타났다. 하지만 후속 영구치가 결손되는 빈도는 유중절치와 유측절치가 융합된 경우(23.8%)보다 유측절치와 유견치가 융합된 경우(73.9%)에서 훨씬 높게 나타났다. 3. 상악의 경우는 오직 유중절치와 유측절치 부위에서만 이중치가 발견되었는데, 이중 유중 절치와 유측절치가 융합된 경우(75%) 특히 후속 영구치의 결손 빈도가 높았다. 4 이중치의 유형별로는 융합된 두개의 치관 및 치근을 갖는Type IV의 발생율이 가장 높았고(51.9%) 이에 따라 후속 영구치도 높은 빈도로 결손되었다(60.7%). 하지만 영구치 결손 빈도만으로는 큰 치관과 큰 치근을 갖는 Type II에서 가장 높았다(75%).

• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.3.1-3.9
• /
• 2022

Objectives: This study aimed to assess the impact of a glide-path on the shaping ability of 2 single-file instruments and to compare the centering ability, maintenance of original canal curvatures and area of instrumentation in simulated S-shaped root canals. Materials and Methods: Forty simulated S-shaped root canals were used and were prepared with One Curve (group OC), One G and OC (group GOC), Reciproc Blue (group RB) and R-Pilot and RB (group PRB) and scanned before and after instrumentation. The images were analyzed using AutoCAD. After superimposing the samples, 4 levels (D1, D2, D3, and D4) and 2 angles (Δ1 and Δ2) were established to evaluate the centering ability and modification of the canal curvatures. Then, the area of instrumentation (ΔA) was measured. The data were analyzed using 2-way analysis of variance and Tukey's test for multiple comparisons (p < 0.05). Results: Regarding the centering ability in the apical part (D3, D4), the use of the glide-path yielded better results than the single-file groups. Among the groups at D4, OC showed the worst results (p < 0.05). The OC system removed less material (ΔA) than the RB system, and for Δ1, OC yielded a worse result than RB (p < 0.05). Conclusions: The glide-path improved the centering ability in the apical part of the simulated S-shaped canals. The RB system showed a better centering ability in the apical part and major respect of the canal curvatures compared with OC system.

• Restorative Dentistry and Endodontics
• /
• 제42권4호
• /
• pp.273-281
• /
• 2017

Objectives: The aims of this study were to quantify tug-back by measuring the pulling force and investigate the correlation of clinical tug-back pulling force with in vitro gutta-percha (GP) cone adaptation score using micro-computed tomography (${\mu}CT$). Materials and Methods: Twenty-eight roots from human single-rooted teeth were divided into 2 groups. In the ProTaper Next (PTN) group, root canals were prepared with PTN, and in the ProFile (PF) group, root canals were prepared using PF (n = 14). The degree of tug-back was scored after selecting taper-matched GP cones. A novel method using a spring balance was designed to quantify the tug-back by measuring the pulling force. The correlation between tug-back scores, pulling force, and percentage of the gutta-percha occupied area (pGPOA) within apical 3 mm was investigated using ${\mu}CT$. The data were analyzed using Pearson's correlation analysis, one-way analysis of variance (ANOVA) and Tukey's test. Results: Specimens with a strong tug-back had a mean pulling force of 1.24 N (range, 0.15-1.70 N). This study showed a positive correlation between tug-back score, pulling force, and pGPOA. However, there was no significant difference in these factors between the PTN and PF groups. Regardless of the groups, pGPOA and pulling force were significantly higher in the specimens with a higher tug-back score (p < 0.05). Conclusions: The degree of subjective tug-back was a definitive determinant for master cone adaptation in the root canal. The use of the tug-back scoring system and pulling force allows the interpretation of subjective tug-back in a more objective and quantitative manner.