• Journal of Korean Foot and Ankle Society
• /
• v.21 no.1
• /
• pp.21-26
• /
• 2017

Purpose: To evaluate the clinical outcome of an operation with early rehabilitation from ankle fracture in accordance with the injury type. Materials and Methods: A total of 136 patients (70 males and 66 females) who underwent surgery and early rehabilitation for ankle fractures between December 2008 and December 2013 were retrospectively reviewed. The average age was 47.9 years, with a range of 18~79 years. The mean follow-up period was 28.7 months, with a range of 24~102 months. All patients were classified in accordance with the Lauge Hansen classification and anatomic fracture site. Moreover, the presence of ligament injuries were documented. A short-leg cast was applied postoperatively for two weeks; thereafter, patients began the range-of-motion exercises after cast removal. Full weightbearing was allowed at 2 weeks postoperatively. Each patient was assessed radiologically and clinically based on the OlerudMolander score, visual analogue scale (VAS) for pain, joint stiffness, and capability of single heel raising. Results: Seventeen patients (12.5%) complained of postoperative pain (VAS score 1~3), and the incidence was higher in patients with trimalleolar fractures or associated ligament injuries. Twenty-three patients (16.9%) complained of postoperative ankle stiffness. The mean Olerud-Molander score was 75.4/80 (range, 55~80). Olerud-Molander scores were lower in patients with ligament injuries than in those with fracture alone. There was no nonunion or fracture displacement even after early weightbearing walking. Conclusion: In this retrospective series, early rehabilitation after surgical restoration of ankle mortise by anatomical reduction and stabilization was shown to be successful. Earlier motion exercise and weightbearing walking can minimize fracture complications like joint stiffness or weakness in ankle fracture.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.4
• /
• pp.350-356
• /
• 2015

Objective : Cases of contralateral radiculopathy after a transforaminal lumbar interbody fusion with a single cage (unilateral TLIF) had been reported, but the phenomenon has not been explained satisfactorily. The purpose of this study was to determine its incidence, causes, and risk factors. Methods : We did retrospective study with 546 patients who underwent a unilateral TLIF, and used CT and MRI to study the causes of contralateral radicular symptoms that appeared within a week postoperatively. Clinical and radiological results were compared by dividing the patients into the symptomatic group and asymptomatic group. Results : Contralateral symptoms occurred in 32 (5.9%) of the patients underwent unilateral TLIF. The most common cause of contralateral symptoms was a contralateral foraminal stenosis in 22 (68.8%), screw malposition in 4 (12.5%), newly developed herniated nucleus pulposus in 3 (9.3%), hematoma in 1 (3.1%), and unknown origin in 2 patients (6.3%). 16 (50.0%) of the 32 patients received revision surgery. There was no difference in visual analogue scale and Oswestry disability index between the two groups at discharge. Both preoperative and postoperative contralateral foraminal areas were significantly smaller, and postoperative segmental angle was significantly greater in the symptomatic group comparing to those of the asymptomatic group (p<0.05). Conclusion : The incidence rate is not likely to be small (5.9%). If unilateral TLIF is performed for cases when preoperative contralateral foraminal stenosis already exists or when a large restoration of segmental lordosis is required, the probability of developing contralateral radiculopathy is increased and caution from the surgeon is needed.

• Clinics in Shoulder and Elbow
• /
• v.19 no.4
• /
• pp.216-222
• /
• 2016

Background: We investigated the effectiveness of fibular strut allograft augmentation of proximal humerus fractures to prevent varus deformity in patients over the age of 65 years with insufficient medial support. Methods: We analyzed the clinical and radiological outcomes of locking plate fixation with adjunct fibular strut allograft augmentation in 21 patients with proximal humeral fractures. The inclusion criteria were age (65-year-old or older); presence of severe medial comminution; inadequate medial support; and those who could participate in at least a one year follow-up. The average age was 76.4 years. We analyzed each patient's Constant score, our indicator of clinical outcome. As radiological parameters, we analyzed time-to-bone union; restoration of the medial hinge; difference between the immediately postoperative and the last follow-up humeral neck-shaft angles;; and anatomical reduction status, which was assessed using the Paavolainen method. Results: A successful bone union was achieved in all patients at an average of 11.4 weeks. We found that the average Constant score was 74.2, showing a satisfactory outcome. The average difference in the humeral neck-shaft angles between the immediately postoperative time-point and at the final follow-up was $3.09^{\circ}$. According to the Paavolainen method, the anatomical reduction was rated excellent. The medial hinge was restored in 14 of 21 patients. Although we did not find evidence for osteonecrosis, we found that a single patient had a postoperative complication of screw cut-out. Conclusions: Fibular strut allografting as an adjunct treatment of proximal humeral fractures may reduce varus deformity in patients with severe medial comminution.

• Journal of Animal Reproduction and Biotechnology
• /
• v.35 no.2
• /
• pp.198-206
• /
• 2020

Food and agricultural production sector, especially livestock production is vital for Mongolia's economic and social development. Domestic sheep play key roles for Mongolians, providing food (meat, milk) and raw materials (wool, sheepskin), but genetic diversity, origin of sheep populations in Mongolia have not been well studied. Studies of population genetic diversity is important research field in conservation and restoration of animal breeds and genetic resources. Therefore, this study aimed to investigate genetic characteristics and estimate origin through the analysis of mitochondrial DNA control region D-loop and Cytochrome b of Mongolian indigenous sheep (Mongolian native, Orkhon and Altanbulag) and one Europe sheep (Suffolk). As a result of there were found, 220 SNPs (Single nucleotide polymorphism) in the D-loop region, 28 SNPs in the Cytochrome B region, furthermore, 77 Haplotypes. The nucleotide diversity was only found in D-loop region (n = 0.0184). Phylogenetic analysis showed that 3 (A, B, and C) of 5 haplogroups of sheep have been identified in our research. Haplogroup C was only found in Mongolian indigenous sheep. Haplogroup D and E were not observed. As a result of haplogroups, haplogroup A was dominant (n = 46 of 94 sheeps), followed by haplogroup B (n = 36) and haplogroup C (n = 12). Sequence analysis showed that T deletion, insertion and heteroplasmy in D-loop region occurred at a high rate in Mongolian indigenous sheep population (T insertion = 47, T deletion = 83). The heteroplasmy, which has never been found in Mongolian sheep, has been newly discovered in this study. As a result, the Mongolian sheep varieties, which mainly derived from Asia, were in hybridization with European sheep varieties.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.1
• /
• pp.25-32
• /
• 1998

The distinction between isolated and combined injuries is crucial both for treatment and prognosis. For most combined injuries, surgical treatment continues to be favored over nonoperative treatment. It is generally agreed that isolatel PCL injuries do well without surgery. There has been an interest by many authors to fix the graft directly to the posterior aspect of the tibia(tibial inlay). With this procedure, tibial graft fixation will be more direct and theoretically reduce the bending effects of the graft with a fixation site far away from the tibial insertion. Modified tibial inlay technique, which is the posterior approach does not require the patient to be in the prone or lateral decubitus position during the operation. Use of a double-bundle reconstructive technique is attractive and has been performed by some surgeons. At this time, this procedure is still being investigated and should not be routinely used in the clinical setting until studies have indicated an advantage over current single-bundle techniques. However theologically, double-bundle reconstructive technique is more useful in severe posterior unstable knee. Recent advances have increased our knowledge of the anatomy and mechanical characteristics of the PCL. Basic science research has further increased our awareness of the interaction of the posterolateral structures with the PCL. To achieve restoration of normal posterior laxity, it is critical to address the posterior as well as the postero-lateral structures. Surgical treatment is often complex and requires a wide range of surgical techniques and skills to treat associated injuries. When the PCL is reconstructed, most surgeons choose to reconstruct the anterolateral component using a graft of sufficient size and strength. The initial postoperative rehabilitation should be addressed cautiously in an effort to avoid excessive forces on delicate repairs and reconstructions in these complex injuries. Further research is necessary to evaluate new surgical approaches such as double-bundle reconstructions and tibial inlay techniques as well as improved techniques for capsular and collateral ligament injuries.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.53-67
• /
• 2002

This study was aimed to analyze the stress distribution of implant and supporting tissue in single tooth implant restoration using Branemark $system^{(R)}$(Nobel Biocare, Gothenberg, Sweden) and Bicon system(Bicon Dental Implants, Boston, MA). Two dimensional finite element analysis model was made at mandibular first premolar area As a crown materials porcelain, ceromer, ADA type III gold alloy were used. Tests have been performed at 25Kgf vertical load on central fossa of crown portion and at 10Kgf load with $45^{\circ}$ lateral direction on cusp inclination. The displacement and stresses of implant and supporting structures were analyzed to investigate the influence of the crown material and the type of implant systems by finite element analysis. The results were obtained as follows : 1. The type of crown material influenced the stress distribution of superstructure, but did not influence that of the supporting alveolar bone. 2. The stress distribution of ceromer and type III gold alloy and porcelain is similar. 3. Stress under lateral load was about twice higher than that of vertical load in all occlusal restorative materials. 4. In Bicon system, stress concentration is similar in supporting bone area but CerOne system generated about 1.5times eater stress more in superstructure material. 5. In Branemark models, if severe occlusal overload is loaded in superstvucture. gold screw or abutment will be fractured or loosened to buffer the occlusal overload but in Bicon models such buffering effect is not expected, so in Bicon model, load can be concentrated in alveolar bone area.

• Journal of Periodontal and Implant Science
• /
• v.44 no.1
• /
• pp.8-12
• /
• 2014

Purpose: The aim of this retrospective chart review was to evaluate the four-year survival rate of a titanium implant system. Methods: A total of 352 sand-blasted, thermally acid-etched titanium implants were inserted into 181 partially or completely edentulous patients. Their cumulative survival rate was evaluated retrospectively. Associated factors, such as the implant distribution and treatment type were included in the evaluation. Results: The implants were equally distributed between the maxilla (52.3%) and the mandible (47.7%). 48 implants (13.6%) were placed in the anterior region and 304 implants (86.4%) in the posterior region. The majority of the implants were inserted into bone of type II and III quality (89.8%) and volume (quantity B and C, 87.2%). Most of the implants (70.7%) were restored as single crowns; 28.7% supported a bridge construction and 0.6% a full denture. Only one implant failed, resulting in a four-year cumulative survival rate of 99.7%. Conclusions: The implant system showed an excellent four-year survival rate. It proved to be a safe and predictable means for restoration of the dentition in partially or completely edentulous patients.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.239-248
• /
• 2007

The accuracy and dimensional stability of rubber impression materials are very important for the fitness of the final restoration. The purpose of this investigation was to evaluate the effects of the storage time and pouring frequency of the additional silicone materials on dimensional stability. Total 30 impressions were made of tooth prepared single crown. The dies had 1 buccolingual, 1 mesiodistal and 1 occlusogingival lines. Two additional silicone materials(examixfine, aquasil) were included. 15 specimens were made of each impression material and poured by type IV stone over times(1hour, 24hours, 72hours) after mixing. 5 impressions poured after 1 hour were used for second pouring after 24hours and third pouring after 72hours. The same examiner measured each specimen 3 times after lazer scanning. All statistical tests were performed with the level of significance set at 0.05. The results indicated that significant difference at any measuring point of stone dies except the buccolingual and mesiodistal lines of the specimen made at 1hour after mixing with examixfine when measurements at 1hour, 24hours and 72hours were campared. There were significant difference between two impression materials and at every measuring point of stone dies made at second and third pouring. The length of measuring point increased significantly as time passed by and increase of the pouring frequency. However, this results are clinically acceptable except the dies of the third pouring. Under the conditions of this study, the shrinkage rate of the additional silicone rubber impression materials significantly increased as time passed by and increase of the pouring frequency.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.136-142
• /
• 2014

Nowadays, dental zirconia is widely used as a framework material for a fixed dental prosthesis as well as a single restoration. However, clinical studies have reported high incidence of veneer chipping of zirconia-ceramic restorations compared to that of metal-ceramics. Several factors were raised as the possible causes of veneer ceramic chipping, however, it is still in debate. Recently, residual stresses in the veneer ceramics after cooling process gathers attention as one possible cause of chipping and many studies reported that the rate of cooling significantly influenced the types and the amount of residual stress. The purpose of current review was to briefly describe the effect of cooling rate on the residual stress in zirconia-ceramics. It was also described that the different behavior of residual stress between zirconia-ceramics and metal-ceramics following different cooling rate.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.154-161
• /
• 2015

A novel multiframe super-resolution (SR) algorithm is presented to overcome the limitation of existing single-image SR algorithms using motion information from adjacent frames in a video. The proposed SR algorithm consists of three steps: i) definition of a local region using interframe motion vectors, ii) multiscale patch generation and adaptive selection of multiple optimum patches, and iii) combination of optimum patches for super-resolution. The proposed algorithm increases the accuracy of patch selection using motion information and multiscale patches. Experimental results show that the proposed algorithm performs better than existing patch-based SR algorithms in the sense of both subjective and objective measures including the peak signal-to-noise ratio (PSNR) and structural similarity measure (SSIM).