• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.9
• /
• pp.715-721
• /
• 2013

Minimization techniques are adaptations of Helical structure, Meta material, multi-layer structure etc. But, Helical structure is not suited to minimization technique of RF circuit having single resonant frequency. Because it generate resonant frequency following as rotation of circumference. Meta material and multi layer structure have weakness of expenditure and complex structure. In addition, conventional three dimensional M$\ddot{o}$bius Strip and planar M$\ddot{o}$bius Strip are not two dimensional planar M$\ddot{o}$bius Strip that has weakness of electrical coupling effect. Therefore, in this paper, we proposed miniaturized and reduced electrical coupling effect antenna by adaptation of Quasi M$\ddot{o}$bius Strip that topology is same as three dimensional M$\ddot{o}$bius Strip with Via-Hole structure. According to the simulation result, physical circumferential length is 1/3 minimized compared with conventional ring antenna under the same resonant frequency. In addition, coupling effect is not nearly generates near to the resonant frequency, 2.4GHz.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.62-69
• /
• 2022

EHA (Electro-Hydrostatic Actuator) is more energy efficiency than a centralized hydraulic system. In particular, the EHA used for aircraft has a redundant design in preparation for failure scenario. Also, due to the aircraft's internal space limitation, the actuator's length must be optimized. Therefore, a series configuration of double rod and single rod cylinder is advantageous. However, due to the asymmetry of the cross-sectional area of the piston, the force fighting phenomenon between the two cylinder areas occurs during redundant operation with a general control system. In this paper, the force fighting phenomenon of redundant EHA was simulated. A controller with load compensation and a force control-based position controller as a method to suppress its stimulation

• International Journal of Stem Cells
• /
• v.16 no.1
• /
• pp.78-92
• /
• 2023

Background and Objectives: This study aims to clarify the systems underlying regulation and regulatory roles of hydrogen combined with 5-Aza in the myogenic differentiation of adipose mesenchymal stem cells (ADSCs). Methods and Results: In this study, ADSCs acted as an in vitro myogenic differentiating mode. First, the Alamar blue Staining and mitochondrial tracer technique were used to verify whether hydrogen combined with 5-Aza could promote cell proliferation. In addition, this study assessed myogenic differentiating markers (e.g., Myogenin, Mhc and Myod protein expressions) based on the Western blotting assay, analysis on cellular morphological characteristics (e.g., Myotube number, length, diameter and maturation index), RT-PCR (Myod, Myogenin and Mhc mRNA expression) and Immunofluorescence analysis (Desmin, Myosin and 𝛽-actin protein expression). Finally, to verify the mechanism of myogenic differentiation of hydrogen-bound 5-Aza, we performed bioinformatics analysis and Western blot to detect the expression of p-P38 protein. Hydrogen combined with 5-Aza significantly enhanced the proliferation and myogenic differentiation of ADSCs in vitro by increasing the number of single-cell mitochondria and upregulating the expression of myogenic biomarkers such as Myod, Mhc and myotube formation. The expressions of p-P38 was up-regulated by hydrogen combined with 5-Aza. The differentiating ability was suppressed when the cells were cultivated in combination with SB203580 (p38 MAPK signal pathway inhibitor). Conclusions: Hydrogen alleviates the cytotoxicity of 5-Aza and synergistically promotes the myogenic differentiation capacity of adipose stem cells via the p38 MAPK pathway. Thus, the mentioned results present insights into myogenic differentiation and are likely to generate one potential alternative strategy for skeletal muscle related diseases.

• Journal of Trauma and Injury
• /
• v.37 no.1
• /
• pp.37-47
• /
• 2024

Purpose: This study aimed at developing a novel tube thoracostomy technique using the sternum, a fixed anatomical structure, as an indicator to reduce the possibility of incorrect chest tube positioning and complications in patients with chest trauma. Methods: This retrospective study analyzed the data of 184 patients with chest trauma who were aged ≥18 years, visited a single regional trauma center in Korea between April and June 2022, and underwent chest computed tomography (CT) with their arms down. The conventional gold standard, 5th intercostal space (ICS) method, was compared to the lower 1/2, 1/3, and 1/4 of the sternum method by analyzing CT images. Results: When virtual tube thoracostomy routes were drawn at the mid-axillary line at the 5th ICS level, 150 patients (81.5%) on the right side and 179 patients (97.3%) on the left did not pass the diaphragm. However, at the lower 1/2 of the sternum level, 171 patients (92.9%, P<0.001) on the right and 182 patients (98.9%, P= 0.250) on the left did not pass the diaphragm. At the 5th ICS level, 129 patients (70.1%) on the right and 156 patients (84.8%) on the left were located in the safety zone and did not pass the diaphragm. Alternatively, at the lower 1/2, 1/3, and 1/4 of the sternum level, 139 (75.5%, P=0.185), 49 (26.6%, P<0.001), and 10 (5.4%, P<0.001), respectively, on the right, and 146 (79.3%, P=0.041), 69 (37.5%, P<0.001), and 16 (8.7%, P<0.001) on the left were located in the safety zone and did not pass the diaphragm. Compared to the conventional 5th ICS method, the sternum 1/2 method had a safety zone prediction sensitivity of 90.0% to 90.7%, and 97.3% to 100% sensitivity for not passing the diaphragm. Conclusions: Using the sternum length as a tube thoracostomy indicator might be feasible.

• Journal of radiological science and technology
• /
• v.28 no.2
• /
• pp.105-110
• /
• 2005

Background/Aim : Common bile duct (CBD) stones may cause jaundice, cholangitis, or pancreatitis. Extracorporeal shock wave lithotripsy (ESWL) may be needed whenever endoscopic procedure are failed to extract common bile duct stones. The aim of this study is to provide the standard for patient's best choice on ESWL for treatment of CBD stones resistant to endoscopic extraction. Materials and Methods : Fourty-six patients failed in endoscopic stone extraction including mechanical lithotripsy were treated by ESWL. In all patients, endoscopic sphincterotomy and nasobiliary drainage tube was done before ESWL using the ultrasonography for stone localization with a spark-gap type lithotriptor. Patients were sedated with an intravenous injection of 50 mg of Demerol. None were treated under general anesthesia. Results : Overall complete clearance rate of CBD stone was 89.1% (41/46). In 82.6% of the patients, the stones were extracted endoscopically after ESWL, and spontaneous passage was observed in 6.5%. In the clearance rate after ESWL, there were no noticeable differences with regard to number (single: 82.8%, two or three: 100%, more than three: 100%) and size of the stone (less than 33mm: 92.9%, 33 mm or larger: 83.3%), whereas there were significant differences with regard to the ratio of sum of long-axis length of the all stones to sum of long-axis length of the CBD excluding stone (1:2.4, 1:2.1) and diameter of the largest stone to diameter of CBD excluding stone (1:0.9, 1:0.4) for patients with complete clearance compared with those without. Conclusion : We propose that stones without the fragments are travelable sufficient space in CBD or extractable sufficient diameter of CBD regardless of stone size and number should be treated by other technique to prevent time and cost consuming, such as percutaneous transhepatic cholangioscopylithotomy.

• Korean Journal of Crystallography
• /
• v.6 no.1
• /
• pp.1-13
• /
• 1995

Cr:A12O3 and Ti:A12O3 single crystals were grown by Czochralski method, and the effects of crystal growth parameters such as pulling rate, rotation rate, dopant and growth atmosphere on crystal quality were investigated. And spectroscopic properties including lasing efficiency were also measured. Single crystals, sized of 20mm in diameter and 100-135mm in length, were successfully grown from the seed of <001> direction. With the doping level of 0.5w/o Cr2O3, pulling rate 2.0mm/hr, rotation rate of 30rpm and inert atmosphere by nitrogen gas, high quality crystals of Cr:A12O3 were grown. While in case of Ti:A12O3 crystals, high quality crystals were grown under the conditions of the doping level of 0.25w/o TiO2, pulling rate of 1.5mm/hr, rotation rate of 30rpm and reducing atmosphere by hydrogen - nitrogen mixed gas. It was confirmed that Cr3+ ion which maintains its ionoc valence during growth easily de-bubbled than Ti4+ ion which changes its valence, Fe3+ ion also has do-bubbling effect to Ti:A12O3 crystal and the reducing atmosphere by 90% N2 - 10% H2 mixed gas gave effective result on the changing of Ti4+ to Ti3+ and de-bubbling. As a result of spectroscopic measurements of Cr:A12O3 crystal, 4A2 →4F2 and 4F1 absorption transitions and E →4A2(R1) and 2A →4A2(R2) fluorenscence transitions were confirmed. And it was measured that wavelengths of laser R1 and R2 transitions were 696±5nm and 692±5nm respectively, line width of these transitions were 12A, and life-time of fluorenscence was 152μsec. In case of Ti:A12O3 crystals, it was confirmed that absortion transition of 4T2→4E and fluorescence transition of 4E→4T2 with wide range of 650-1050nm was occured. And 147μsec of life-time of fluorescence, 125.4 of figure of merit and 9% of laser efficience were also measured.

• Journal of Distribution Research
• /
• v.12 no.1
• /
• pp.1-31
• /
• 2007

While trust and commitment are core mediating variables for the purpose of maintaining the long-term relationship, in the context of the characteristics of company and the relationship performance of its members, there have been limited studies which explore as to how each of the dimensions has affects differently. The basic purpose of this study is to examine the relationship between an automobile manufacturer and its agencies. The main purpose of this study is to examine how each different dimension of trust and commitment on the automobile manufacturer has different mediating effects between the characteristics of company(organization characteristics, relationship characteristics) and relationship performance perceived by its agents. Another purpose is to investigate the mechanism by which the relationship performance of the agencies is improved. An empirical study surveying 115 sales office managers at a leading automobile manufacturer in Korea was conducted. An analysis of the collected data indicates that while the characteristics of company have a positive influence on the agencies' relational performance through the mediating role of both trust of benevolence and commitment, agencies' trust of their headquarter's benevolence has a different influence on the dimensions of commitment. Finally, the authors discussed some theoretical contributions and managerial implications. And then, they presented limitations of this study and the future research directions.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.345-359
• /
• 2006

Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p$MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p$ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.

• Clinical and Experimental Reproductive Medicine
• /
• v.35 no.2
• /
• pp.99-110
• /
• 2008

Objectives: Preimplantation genetic diagnosis (PGD) has become an assisted reproductive technique for couples carrying genetic conditions that may affect their offspring. Osteogenesis imperfecta (OI) is an autosomal dominant disorder of connective tissue characterized by bone fragility and low bone mass. At least 95% of cases are caused by dominant mutations in the COL1A1 or COL1A2. In this study, we report on our experience clinical outcomes with 5 PGD cycles for OI in two couples. Methods: Before clinical PGD, we assessed the amplification rate and allele drop-out (ADO) rate of alkaline lysis and nested PCR protocol using heterozygous patient's single lymphocytes in the pre-clinical diagnostic tests for OI. We performed 5 cycles of PGD for OI by nested PCR for the causative mutation loci, COL1A1 c.2452G>A and c.3226G>A, in case 1 and case 2, respectively. The PCR products were analyzed by agarose gel electrophoresis, restriction fragment length polymorphism (RFLP) analysis with HaeIII restriction enzyme in the case 1 and direct DNA sequencing. Results: We confirmed the causative mutation loci, COL1A1 c.2452G>A in case 1 and c.3226G>A in case 2. In the pre-clinical tests, the amplification rate was 94.2% and ADO rate was 22.5% in case 1, while 98.1% and 1.9% in case 2, respectively. In case 1, a total of 34 embryos were analyzed and 31 embryos (91.2%) were successfully diagnosed in 3 PGD cycles. Eight out of 19 embryos diagnosed as unaffected embryos were transferred in all 3 cycles, and in the third cycle, pregnancy was achieved and a healthy baby was delivered without any complications in July, 2005. In case 2, all 19 embryos (100.0%) were successfully diagnosed and 4 out of 11 unaffected embryos were transferred in 2 cycles. Pregnancy was achieved in the second cycle and the healthy baby was delivered in March, 2008. The causative locus was confirmed as a normal by amniocentesis and postnatal diagnosis. Conclusions: To our knowledge, these two cases are the first successful PGD for OI in Korea. Our experience provides a further demonstration that PGD is a reliable and effective clinical techniques and a useful option for many couples with a high risk of transmitting a genetic disease.

• 한국균학회소식:학술대회논문집
• /
• 2015.05a
• /
• pp.53-53
• /
• 2015

Agrobacterium tumefaciens-mediated transformation(ATMT) of Flammulina velutipes was used to produce a diverse number of transformants to discover the functions of gene that is vital for its variation color, spore pattern and cellulolytic activity. Futhermore, the transformant pool will be used as a good genetic resource for studying gene functions. Agrobacterium-mediated transformation was conducted in order to generate intentional mutants of F. velutipes strain KACC42777. Then Agrobacterium tumefaciens AGL-1 harboring pBGgHg was transformed into F. velutipes. This method is use to determine the functional gene of F. velutipes. Inverse PCR was used to insert T-DNA into the tagged chromosomal DNA segments and conducting sequence analysis of the F. velutipes. But this experiment had trouble in diverse morphological mutants because of dikaryotic nature of mushroom. It needed to make monokaryotic fruiting varients which introduced genes of compatible mating types. In this study, next generation sequencing data was generated from 28 strains of Flammulina velutipes with different phenotypes using Illumina Hiseq platform. Filtered short reads were initially aligned to the reference genome (KACC42780) to construct a SNP matrix. And then we built a phylogenetic tree based on the validated SNPs. The inferred tree represented that white- and brown- fruitbody forming strains were generally separated although three brown strains, 4103, 4028, and 4195, were grouped with white ones. This topological relationship was consistently reappeared even when we used randomly selected SNPs. Group I containing 4062, 4148, and 4195 strains and group II containing 4188, 4190, and 4194 strains formed early-divergent lineages with robust nodal supports, suggesting that they are independent groups from the members in main clades. To elucidate the distinction between white-fruitbody forming strains isolated from Korea and Japan, phylogenetic analysis was performed using their SNP data with group I members as outgroup. However, no significant genetic variation was noticed in this study. A total of 28 strains of Flammulina velutipes were analyzed to identify the genomic regions responsible for producing white-fruiting body. NGS data was yielded by using Illumina Hiseq platform. Short reads were filtered by quality score and read length were mapped on the reference genome (KACC42780). Between the white- and brown fruitbody forming strains. There is a high possibility that SNPs can be detected among the white strains as homozygous because white phenotype is recessive in F. velutipes. Thus, we constructed SNP matrix within 8 white strains. SNPs discovered between mono3 and mono19, the parental monokaryotic strains of 4210 strain (white), were excluded from the candidate. If the genotypes of SNPs detected between white and brown strains were identical with those in mono3 and mono19 strains, they were included in candidate as a priority. As a result, if more than 5 candidates SNPs were localized in single gene, we regarded as they are possibly related to the white color. In F. velutipes genome, chr01, chr04, chr07,chr11 regions were identified to be associated with white fruitbody forming. White and Brown Fruitbody strains can be used as an identification marker for F. veluipes. We can develop some molecular markers to identify colored strains and discriminate national white varieties against Japanese ones.