• Journal of Korean Association for Spatial Structures
• /
• v.6 no.1 s.19
• /
• pp.75-82
• /
• 2006

The single layer latticed dome is very sensitive on the slenderness ratio and half open angle of the elements, load condition, and the connection type because it is organized by a lot of thin elements, so we have to use the geometrically nonlinear buckling load when the buckling of the structures is analyzed. But, it is very difficult to design the single layer latticed domes considered all renditions. Therefore the purpose of this paper is to propose the appropriate design method of the single layer latticed dome considered the geometrically nonlinear buckling load in base of the linear buckling load by the eigenvalue analysis.

• Steel and Composite Structures
• /
• v.8 no.6
• /
• pp.511-530
• /
• 2008

This paper discusses a feasibility of a new type of two-way system for single layer lattice domes with nodal eccentricity by investigating the dynamic behavior under earthquake motions. The proposed dome is composed of two main arches, intersecting each other with T-joint struts to provide space for tensioning membranes. The main purposes of this study are to calculate the nonlinear dynamic response under severe earthquake motions and to see the possibility of using this new type of two-way system for single layer lattice domes against earthquake motions. The results show that the main arches remain elastic except yielding of the joints of strut members that can be used to absorb some amount of strain energy at strong earthquake motion. Consequently, deformation of the main arches can be reduced and any heavy damages on the main arches can be minimized. A kind of damage-control characteristic appeared in this system may be utilized against severe earthquake motions, showing a possibility of designing a new type of single layer lattice dome.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1206-1209
• /
• 2018

Single-layer winding configuration in a 12-slot 10-pole Permanent Magnet Synchronous Motor (PMSM) has been adopting in electrical power steering (EPS) systems to get the high fault tolerance capability of the motor. However, the motor with single-layer winding has magnetic circuit saturations in the teeth, which deteriorates its performance. In this paper, we propose asymmetric teeth widths to get over the demerit, and analyze the effect of the teeth width ratio variations on the performances of the PMSM. As a result, we suggest the most valuable teeth width ratio for designing the PMSM with a single-layer winding configuration.

• Journal of applied mathematics & informatics
• /
• v.3 no.2
• /
• pp.265-278
• /
• 1996

This paper is composed of the complete representation of two dimensional single layer potentials with linear strength on a straight line segment and its far field behavior which is closely related to the pose of this line segment. The far field behavior of a single layer potential on a given curve has informations of the shape of the curve.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.14-15
• /
• 2018

This study is to estimate the buckling characteristics of single-layer latticed dome with Span 300m according to junction's conditions of member.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.982-985
• /
• 2007

The authors report methods of fabrication singlelayer color cholesteric liquid crystal displays (CLCDs). A single-layer CLCD has been prepared from a polymerstabilized cholesteric liquid crystal. The unique feature of the polymer stabilization is in that the electrically switched colors preserve high reflectivity. A bistable single-layer CLCD has been prepared by the formation of polymer barrier walls and light-tuned cholesteric pitches to reflect blue, green and red color sub-pixels.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.56-61
• /
• 2013

In this paper, a high gain patch antenna using a single layer metamaterial superstrate with a near-to-zero refractive index (n) is proposed. Simulations for an ordinary patch antenna and our proposed metamaterial patch antenna were conducted. Our proposed metamaterial patch antenna was implemented and measured. The gain of our proposed metamaterial patch antenna is 6.77dB higher than that of an ordinary patch antenna.

• Journal of Korean Association for Spatial Structures
• /
• v.15 no.4
• /
• pp.49-56
• /
• 2015

The roof grid of single-layer space frame structure, for Energy Core of Incheon Airport Second Terminal, is very simple and aesthetic, but it is apt to buckle under external force because of mild curvature and complex shape. The object of this study is to estimate the stability of single-layer space frame structures for Energy Core of Incheon Airport Second Terminal with the analytical conditions of structural design. The results show that the buckling load of model(pin-pin, uniform load, rigid joint), that is, the most similar model to the analytical conditions of structural design. was $10.7kN/m^2$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.332-335
• /
• 2000

We fabricated organic electroluminescent (EL) devices with single layer of poly(3-dodeoylthiophene) (P3DoDT) hlended with different amounts of poly(N-vinylcarbazole) (PVK) as a emitting layer. The molar ratio between P3DoDT and PVK changed with 1:0, 2:1 and 1:1. To improve the external quantum efficiency of EL devices, we applied insulating layer, LiF layer, between polymer emitting layer and Al electrode. All of the devices emit orange-red light and it's can be explained that the energy transfer occurs from PVK to P3DoDT. In the voltage-current and voltage-brightness characteristics of devices applied LiF layer, current and brightness increased with increasing applied voltage. The brightness of the device have a molar ratio 1:1 with LiF layer was about 10 times larger than that of the device without PVK at 6V. Electrical impedance properties of ITO/emitting layer/LiF/Al devices were investigated. In the Cole-Cole plots of impedance data, one semicircle was observed. Therefore, the equivalent circuit for the devices can be designed as a single parallel resistor and capacitor network with series resistor.

• Korean Journal of Metals and Materials
• /
• v.47 no.12
• /
• pp.873-880
• /
• 2009

Water-vapor permeation through metallic barriers deposited on polymer substrates has been an important technological issue because the performance of the barrier is critical to the reliability of flexible organic devices. For the development of long-lifetime flexible organic devices, two different sets of samples were designed and demonstrated from the viewpoint of the water-vapor transmission rate (WVTR). Aluminum (Al) and polyethylene terephthalate (PET) were chosen for the barrier layer and the polymer substrate, respectively. Two stacking structures, a single-layer (Al/PET) structure and a double-layer (Al/PET/Al) structure, were used for the WVTR measurement. For the single-layer structure, the WVTR decreases as the thickness of the barrier layer increases. Compared to the single-layer sample, the double-layer sample showed superior WVTR performance (by nearly three times) when the total thickness of the Al barrier was greater than 100 nm.