• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.153.2-153
• /
• 2001

A technique is described for producing a virtual object with realistic motion. A 3-D human motion model is obtained by applying a developed motion capturing technique to a real human in motion. Factorization method is a technique for recovering 3-D shape of a rigid object from a single video image stream without using camera parameters. The technique is extended for recovering 3-D human motions. The proposed system is composed of three fixed cameras which take video images of a human motion. Three obtained image sequences are analyzed to yield measurement matrices at individual sampling times, and they are merged into a single measurement matrix to which the factorization is applied and the 3-D human motion is recovered ...

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.155-164
• /
• 1996

The architecture of a programmable video codec IC is described that employs multiple vector processors in a single chip. The vector processors operate in parallel and communicate with one another through on-chip shared memories. A single scalar control processor schedules each vector processor independently to achieve real-tiem video coding with special vector instructions. With programmable interconnection buses, the proposed architecture performs multi-processing of tasks and data in video coding. Therefore, it can provide good parallelism as well as good programmability. especially, it can operate multithread video coding, which processes several independent image sequences simultaneously. We explain its scheduling, multithred video coding, and vector processor architectures. We implemented a prototype video codec with a 0.8um CMOS cell-based technology for the multi-standard videophone. This codec can execute video encoding and decoding simultaneously for the QCIF image at a frame rate of 30Hz.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.145-149
• /
• 2017

Considering the various user height, we develop a low-cost multimedia electronic podium system for height adjustment. In order to recognize the user utilizes height of a single CCD camera and the ultrasonic sensor. It estimates the height from the user of the image obtained by the CCD camera. Also it uses renal region division method from the image recognition in order to effectively estimated. According to the estimated height, we implemented the control system for the height control of the electronic podium.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.6
• /
• pp.694-699
• /
• 1988

Optical phase conjugate mechanism and edge enhancement by degenerate four wave mixing (DFWM) in photorefractive material are described, and image reconstruction is perfromed sucessfully in BaTiO3 single crystal. Also, the edge enhancement is carried out in the crystal by the same DFWM geometry. But the intensities of three incident beams are inverted. Good quality of edge enhancement is observed in real-time (processing time 10 sec) with low incident light intensity (5.38mW/cm\ulcorner.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.99-108
• /
• 1997

An efficient wavelet packet algorithm to find wavelet packet quickly is presented in this paper. The top-down method maximizing the transform coding gain that is obtained from the second moment of the band is used to divide the subbands into wavelet tree. The bit allocation for each band in the tree is performed in proportion to its variance. Bands are coded by the lossless coding algorithm called the bit plane run length coding(BPRLC) and uniform quantizer. The proposed algorithm is compared with of the single tree algorithim proposed by Ramchandran and Vetterli. To verify the efficiency of our algorithm, simulations are jperformed using several sets of images. The results show us that our method reduces the execution time by about forty percent of that required by the single tree method while maintaining the comparable reconstructed image qualities.

• International Journal of Contents
• /
• v.11 no.3
• /
• pp.7-13
• /
• 2015

One of the biggest problems of skeletonization is the occurrence of distortions at the junction point of the final binary image. At the junction area, a single point usually becomes a small stroke, and the corresponding trajectory task, as well as the OCR, consequently becomes more complicated. We therefore propose an adaptive post-processing method that uses an adaptive threshold technique to correct the distortions. Our proposed method transforms the distorted segments into a single point so that they are as similar to the original image as possible, and this improves the static handwriting images after the skeletonization process. Further, we attained promising results regarding the usage of the enhanced skeletonized images in other applications, thereby proving the expediency and efficiency of the proposed method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.162-166
• /
• 1993

Spodumene$(LiAlLi_2O_6)$ single crystal was grown by Floating Zone process using the image furnace having the halogen lamp as heat sources. The crystal had the dimension of 50~60mm length and 6~8mm diameter. The colors of as-grown crystals were green, black and pale green respectively. The composition of the crystal was analized by XRD and FUR measurement. Growth orientation was examined by Laue back reflection pattern and for measuring the light transmittance, OPtical transmittance was measured.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.1
• /
• pp.85-92
• /
• 1993

Large single crystals of olivine were grown by using image furnace(floating zone furnace)under controlled partial pressure of oxygen. The transparent crystals have maximum sizes 65mm in length by 7mm in diameter. When partial pressure of oxygen was decreased, the portion of secondary phases in crystals were increased so that it made crystals dark brown. The secondary phases were proved to be solid solution of Mg, Si, and Fe by electron microprobe analysis. Mg was major portion and the rest was minor.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.4
• /
• pp.23-40
• /
• 1993

In this paper, we developed a prototype part recognition system for FMS (Flexible Manufacturing System) by comparing the features extracted from CAD data and the features obtained from the image through a single camera, Good or distinct features with high recognition efficiency for a specific part are obtained automatically and intelligently according to the rules from CAD data. Since the selection of distinct features are done automatically without any human interference, the developed system seems to be quite robust. Fourther, since it uses only a few distinct features on-line among many features and all the time-consuming calculations are done off-line, it is possible to recognize each part quickly and accurately. In order to evaluate the performance and the effectiveness of the developed system, two example(L and T shaped parts) are tested and the results are reported.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.192-197
• /
• 2009

In this paper, we proposed the obstacle avoidance system using a single camera image and LM(Levenberg-Marquart) neural network fuzzy controller. According to a robot technology adapt to various fields of industry and public, the robot has to move using self-navigation and obstacle avoidance algorithms. When the robot moves to target point, obstacle avoidance is must-have technology. So in this paper, we present the algorithm that avoidance method based on fuzzy controller by sensing data and image information from a camera and using the LM neural network to minimize the moving error. And then to verify the system performance of the simulation test.