• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.251-257
• /
• 1998

Spherical space frame structure with triangular network pattern, which has the various characteristics for the mechanic property, a funtional property, an aesthetic property and so on, has often been used as one of the most efficient space structures. It is expected that this type will be used widely in large-span structural roofs. But because this structure is made of network by combination of line elements there me many nodes therefore, the structure behavior is very complicated and there can be an overall collapse of structure by buckling phenomenon if the external force reaches a limitation. This kind of buckling is due to geometric shape, network pattern, the number of layer and so on, of structure. Therefore spherical space frame with triangle network pattern have attracted many designers and researchers attention all over the world. The number of layer of space frame is divided in to the simgle, double, multi layer. That is important element which is considered deeply in the beginning of structural design. The buckling characteristics of single-layer model and double-layer model for the spherical space frame structure with triangular network pattern are evaluated and the buckling loads of these types are compared with investigation their structural efficiency in this study.

• Steel and Composite Structures
• /
• 제43권5호
• /
• pp.553-564
• /
• 2022

Many existing reinforced concrete (RC) structures need to be strengthening for reason such as poor construction quality, low ductility or designing without considering seismic effects. One of the strengthening methods is strengthening technique with eccentrically braced frames (EBFs). The characteristic element of these systems is the link element and its length is very important in terms of seismic behavior. The link element of Y shaped EBF systems (YEBFs) is designed as a short shear element. Different limits are suggested in the literature for the link length. This study to aim experimentally investigate the effect of the link length for the suggested limits on the behavior of the RC frame system and efficiency of strengthening technique. For this purpose, a total of 5 single story, single span RC frame specimens were produced. The design of the RC frames was made considering seismic design deficiencies. Four of the produced specimens were strengthened and one of them remained as bare specimen. The steel YEBFs were used in strengthening the RC frame and the link was designed as a shear element that have different length with respect to suggested limits in literature. The length of links was determined as 50mm, 100mm, 150mm and 200mm. All of the specimens were tested under cyclic loads. The obtained results show that the strengthening technique improved the energy consumption and lateral load bearing capacities of the bare RC specimen. Moreover, it is concluded that the specimens YB-2 and YB-3 showed better performance than the other specimens, especially in energy consumption and ductility.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.718-725
• /
• 2009

To get instantaneous reference data in a single power system with vector space phasors, the instantaneous load current is adopted as a phase and another new signal, which is delayed through filtering by the phase-delay property of a low-pass filter, is used as the secondary phase. Because the two-phases have a different phase, the instantaneous value of the harmonic current can be obtained without a time-delay in calculation. The reference voltage is created by multiplying the coefficient k by the compensation current using the rotating reference frame synchronized with the source-frequency. To verify the validity of the proposed control method, experiments are carried out on a prototype of the single-phase hybrid active power filter system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1145-1147
• /
• 2004

This paper proposed a new control method for single-phase hybrid active power filter. The proposed algorithm can change single phase system into the orthogonal system which has two phases giving time-delay in regular single phas and making the imaginary second phase. It can make orthogonal system like as being used in $3{\phi}/2{\phi}$ transformation with two phases. It can do complex calculation which calculates intantaneous reactive power. Istead of existing method applying to intantaneous reactive power theory in fixed reference frame, this paper proposed the algorithm which has advantage over reducing harmonics using rotating reference frame. It verified the effectiveness the proposed method through simulation and experiment.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.341-350
• /
• 2019

Exterior beam-column joint is typically the weakest link in a limited-ductile reinforced concrete (RC) frame structure. The use of diagonal haunch element has been considered as a desirable seismic retrofit option for reducing the seismic demand at the joint. Previous research globally has focused on implementing double haunches, while the use of single haunch element as a less-invasive and more architecturally favorable retrofit option has not been investigated. In this paper, the key formulations and a design procedure for the single haunch system for retrofitting RC exterior beam-column joint are developed. An application of the proposed design procedure is then illustrated through a case study.

• 한국정보기술학회 영문논문지
• /
• 제9권1호
• /
• pp.11-24
• /
• 2019

This paper investigates the performance comparison of a Terahertz (THz) communications for a single-carrier and a multi-carrier single antenna point-to-point communication system. The multi-carrier system and single carrier system consider the orthogonal frequency division multiplexing (OFDM) and the minimum mean square error linear equalizer (MMSE-LE), respectively. We compare the frame-error-rate (FER) and throughput performance of both the systems for a THz communication environment with the carrier frequency of 300GHz and the tapped delay line (TDL) channel models described in 3GPP. It is observed from the simulation results that the OFDM systems outperform the MMSE-LE for various configurations.

• 한국산학기술학회논문지
• /
• 제18권5호
• /
• pp.120-124
• /
• 2017

시간적 초해상도 기법은 일반 카메라로 찍은 영상을 고속카메라로 찍은 영상과 같이 보일 수 있도록 프레임률을 증가시키는 방법이다. 전자광학 센서는 다양한 감시정찰 무기체계에 탑재되는데, 각 무기체계별 작전요구성능에 따라 필요로 하는 전자광학 센서의 공간적 해상도와 시간적 해상도가 달라진다. 대부분의 영상센서가 30~60 프레임/초로 영상을 촬영하기 때문에, 표적의 이동 및 변화가 이보다 더 빠른 경우 프레임률의 증가가 필요하다. 본 논문은 채널별 색상정보 외삽법을 활용하여 프레임률을 증가시키는 기법을 제안한다. DMD의 각 화소를 카메라 센서의 각 화소와 정합한 후, 카메라 센서의 베이어 패턴에 맞추어 각 채널별로 화소 그룹을 분리한다. DMD를 이용해 일반 카메라의 한 프레임이 채널별로 서로 다른 연속된 노출 시간을 가지도록 조절하여, 촬영한 영상을 프레임률이 증가한 단일채널 영상으로 변환한다. 옵티컬 플로우 기법을 활용하여 각 채널별로 시점에 맞는 가상의 영상을 생성하여, 프레임률이 증가한 단일채널 영상을 컬러채널 영상으로 만들었다. 시뮬레이션을 통해 제안된 시간적 초해상도 기법의 성능을 확인하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권1호
• /
• pp.8-16
• /
• 2014

We consider the visual barcode recognition problem in a noisy video data setup. Unlike most existing single-frame recognizers that require considerable user effort to acquire clean, motionless and blur-free barcode signals, we eliminate such extra human efforts by proposing a robust video-based barcode recognition algorithm. We deal with a sequence of noisy blurred barcode image frames by posing it as an online filtering problem. In the proposed dynamic recognition model, at each frame we infer the blur level of the frame as well as the digit class label. In contrast to a frame-by-frame based approach with heuristic majority voting scheme, the class labels and frame-wise noise levels are propagated along the frame sequences in our model, and hence we exploit all cues from noisy frames that are potentially useful for predicting the barcode label in a probabilistically reasonable sense. We also suggest a visual barcode tracking approach that efficiently localizes barcode areas in video frames. The effectiveness of the proposed approaches is demonstrated empirically on both synthetic and real data setup.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.353-360
• /
• 2002

The objective of this study is to develop a technique that analyzes the global behavior of frame structures with local cracks. The technique is based on frame analysis and uses the stiffness matrix of cracked frame element. An algorithm proposed here analyzes a frame structure with local transverseedge cracks, considering the effects of crack length and location. Stress intensity factors are employed to calculate additional local compliance due to the cracks based on linear elastic fracture mechanics theory, and then this local compliance is utilized to derive the stiffness matrix of the cracked frame element. In order to verify the accuracy and reliability of the proposed approach, numerical results are compared with those of Finite Element Method for the cracked frame element, and the effects of single crack on the behavior of truss structure are also examined.

• 대한전자공학회논문지SP
• /
• 제44권2호
• /
• pp.144-152
• /
• 2007

본 논문에서는 멀티 레이저 라인 조사 방법을 이용한 능동적 비젼(Active Vision)의 방법으로 비등속 이동물체의 표면을 효율적으로 모델링 하는 방법을 제안한다. 레이저 라인을 물체에 조사하고 레이저가 조사된 방향과 각도를 달리한 방향에서 이를 관찰하면 레이저 라인이 표면의 굴곡에 따라 휘어지는 현상을 관찰할 수 있다. 이를 삼각기법(triangulation method)을 이용하여 분석하면 물체의 표면 3차원 정보 획득이 가능하다. 기존에 대표적 구조화 조명기법인 단일 라인(single stripe) 기법과 단일 프레임(single frame) 기법의 장단점과 제안하는 멀티 라인 기법의 장점을 설명하고 정밀도를 높이기 위한 레이저 라인의 효율적 배치에 대하여 설명한다. 강인한 레이저 라인의 추출을 위하여, 레이저 라인 피크 검출기법과 색 분석을 통해 얻은 레이저 반응도를 함께 이용하는 방법을 소개하였고, 효과적인 레이저 라인의 라벨링 기법을 새로 제안하였다. 개별 3차원 복원 표면을 전체영상으로 표현하기 위하여 동기화 정보 획득에 영상 간 특징점 매칭을 활용한 영상 정합 기법을 접목하였다. 3차원 표면 모델링 기술을 최종적으로 컨테이너 표면 데미지 검사에 활용하여 제안 3D 모델링 기술의 우수성을 확인하였다.