• 한국공간구조학회논문집
• /
• 제10권4호
• /
• pp.67-74
• /
• 2010

대공간 구조형식을 갖는 단층 래티스 돔은 역학성, 가능성, 심미성 등을 갖는 구조물로서 그 용도가 점점 확대되고 있다. 단층 래티스 돔의 골조 격자 패턴은 무수히 존재하며, 그 대표적인 패턴에는 삼각형, 사각형, 육각형, 라멜라형, 리브형 등이 있다. 대공간 구조물의 경우, 일반구조물과 달리 재래적인 공법으로 지붕 골조를 시공할 경우 많은 가설재가 소요됨으로 시공비 증가가 예상된다. 따라서 대공간 구조물의 지붕 골조 설치는 특수 Erection 공법에 의하는 것이 일반적이며, 그 중 지상에서 지붕골조를 설치 후 jack-up 서포트에 의해 골조를 인양하는 Step-Up 공법을 적용할 경우 공기와 공비의 대폭적인 절감이 예상된다. 따라서 본 논문의 목적은 Step-Up 공법에 의해 단층라멜라 돔의 지붕골조를 시공할 경우, 인양 중 가설 서포트 개수와 위치에 따른 좌굴특성을 검토하는 것이다. 연구 결과 서포트 개수 및 위치에 따른 단층라멜라 돔의 다양한 좌굴 특성에 관한 실무자를 위한 기초적인 자료를 얻을 수 있었다.

• 조명전기설비학회논문지
• /
• 제29권10호
• /
• pp.73-82
• /
• 2015

This paper proposes an ripple reduction algorithm and analyzes the effects of offset and scale errors generated by voltage sensor while measuring grid voltage in grid-tied single-phase inverters. Generally, the grid-connected inverter needs to detect the phase angle information by measuring grid voltage for synchronization, so that the single-phase inverter can be accurately driven based on estimated phase angle information. However, offset and scale errors are inevitably generated owing to the non-linear characteristics of voltage sensor and these errors affect that the phase angle includes 1st harmonic component under using SRF-PLL(Synchronous Reference Frame - Phase Locked Loop) system for detecting grid phase angle. Also, the performance of the overall system is degraded from the distorted phase angle including the specific harmonic component. As a result, in this paper, offset and scale error due to the voltage sensor in single-phase grid connected inverter under SRF-PLL is analyzed in detail and proportional resonant controller is used to reduce the ripples caused by the offset error. Especially, the integrator output of PI(Proportional Integral) controller in SRF-PLL is selected as an input signal of the proportional resonant controller. Simulation and experiment are performed to verify the effectiveness of the proposed algorithm.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.114-129
• /
• 1996

This paper describes the whole development phase for the underwater vehicle actuating system with high hydroload torque disturbance. This includes requirement analysis, system modeling, control algorithm design, real time implementation, test and performance evaluations. As for driving control algorithms, fuzzy logic, variable structure and PD(Proportional-Differential) algorithm were designed and implemented on board controller using a single chip microprocessor. Intel 8797. And test and performance evaluation is carried out both single test and wystem integration test. We could confirm the basic performance of actuating system through the single test and gereral developing work of any actuating systems was finished with a single performance test of actuating system without system integration test. But, we suggested that system integration test be needed. System integration test is carried out using G/C HILS(Guidance and Control Hardware-In-the -Loop Simulation) which is constituted flight motion simulator, load simulator, real time host computer and the related subsystems such as inertial navigation system, power supply system and Guidance and Control Computer etc.. The most important practical contribution of this paper is that full system characteristics such as minimal control effort, enhancement of guidance and autopilot performance by the actuating system using G/C HILS technique are investigated. Through full running G/C HILS, in spite of the passing to single tests, some control algorithm resulted in failure as to stability of full system and system time frame.

• 한국전산구조공학회논문집
• /
• 제16권2호
• /
• pp.173-182
• /
• 2003

비선형 정적해석 및 에너지를 이용한 설계방법에서는 구조물을 등가의 단자유도계로 치환하여 해석하는 것이 일반적이다. 본 연구에서는 지진하중에 의한 3층, 8층, 20층 철골 모멘트저항골조(MRF), 비좌굴 가새골조(BRBF)와 힌지접합 비좌굴 가새골조 (DTBF) 구조물의 에너지 요구량을 등가 단자유도계 시스템(ESDOF)의 에너지 요구량과 비교하여 등가단자유도계로 치환하는 방법의 타당성을 검토하였다 입력에너지와 이력에너지를 산정하기 위하여 연암 지반, 연약한 토사, 단층 근처의 지반에서 계측된 60개의 지진을 사용하였으며, 모드 질량계수가 0.8보다 작은 경우 ESDOF로 변환할 때 고차모드의 효과를 고려하였다. 연구결과에 따르면 3층과 8층 MRF와 DTBF에서의 이력에너지와 입력에너지는 ESDOF의 해석결과와 비교적 잘 일치하였다. 그러나 20층 BRBF에서는 ESDOF의 결과가 본 구조물의 결과를 과소평가하는 것으로 나타났다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.446-457
• /
• 2017

In order to reduce the size of frame memory or bus bandwidth, frame memory compression (FMC) recompresses reconstructed or reference frames of video codecs. This paper proposes a novel FMC design based on discrete wavelet transform (DWT) - set partitioning in hierarchical trees (SPIHT), which supports fine-scalable throughput and is area-efficient. In the proposed design, multi-cores with small block sizes are used in parallel instead of a single core with a large block size. In addition, an appropriate pipelining schedule is proposed. Compared to the previous design, the proposed design achieves the processing speed which is closer to the target system speed, and therefore it is more efficient in hardware utilization. In addition, a scheme in which two passes of SPIHT are merged into one pass called merged refinement pass (MRP) is proposed. As the number of shifters decreases and the bit-width of remained shifters is reduced, the size of SPIHT hardware significantly decreases. The proposed FMC encoder and decoder designs achieve the throughputs of 4,448 and 4,000 Mpixels/s, respectively, and their gate counts are 76.5K and 107.8K. When the proposed design is applied to high efficiency video codec (HEVC), it achieves 1.96% lower average BDBR and 0.05 dB higher average BDPSNR than the previous FMC design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.3012-3028
• /
• 2017

In this paper, we propose a joint power control strategy for both the uplink and downlink transmission by considering the energy requirements of the user equipments' uplink data transmissions in data and energy integrated communication networks (DEINs). In DEINs, the base station (BS) adopts the power splitting (PS) aided simultaneous wireless information and power transfer (SWIPT) technique in the downlink (DL) transmissions, while the user equipments (UEs) carry out their own uplink (UL) transmissions by exploiting the energy harvested during the BS's DL transmissions. In our DEIN model, there are M UEs served by the BS in order to fulfil both of their DL and UL transmissions. The orthogonal frequency division multiple access (OFDMA) technique is adopted for supporting the simultaneous transmissions of multiple UEs. Furthermore, a transmission frame is divided into N time slots in the medium access control (MAC) layer. The mathematical model is established for maximizing the sum-throughput of the UEs' DL transmissions and for ensuring their fairness during a single transmission frame T, respectively. In order to achieve these goals, in each transmission frame T, we optimally allocate the BS's power for each subcarrier and the PS factor for each UE during a specific time slot. The original optimisation problems are transformed into convex forms, which can be perfectly solved by convex optimisation theories. Our numerical results compare the optimal results by conceiving the objective of maximising the sum-throughput and those by conceiving the objective of maximising the fair-throughput. Furthermore, our numerical results also reveal the inherent tradeoff between the DL and the UL transmissions.

• Smart Structures and Systems
• /
• 제22권5호
• /
• pp.495-508
• /
• 2018

Shape memory alloys (SMAs) exhibit superelasticity given the ambient temperature is above the austenite finish temperature threshold, the magnitude of which significantly depends on the metal ingredients though. For the monocrystalline CuAlBe SMAs, their superelasticity was found being maintained even when the ambient temperature is down to $-40^{\circ}C$. Thus this makes such SMAs particularly favorable for outdoor seismic applications, such as the framed structures located in cold regions with substantial temperature oscillation. Due to the thermo-mechanical coupling mechanism, the hysteretic properties of SMAs vary with temperature change, primarily including altered material strength and different damping. Thus, this study adopted the monocrystalline CuAlBe SMAs as the kernel component of the SMA braces. To quantify the seismic response characteristics at various temperatures, a wide temperature range from -40 to $40^{\circ}C$ are considered. The middle temperature, $0^{\circ}C$, is artificially selected to be the reference temperature in the performance comparisons, as well the corresponding material properties are used in the seismic design procedure. Both single-degree-of-freedom systems and a six-story braced frame were numerically analyzed by subjecting them to a suite of earthquake ground motions corresponding to the design basis hazard level. To the frame structures, the analytical results show that temperature variation generates minor influence on deformation and energy demands, whereas low temperatures help to reduce acceleration demands. Further, attributed to the excellent superelasticity of the monocrystalline CuAlBe SMAs, the frames successfully maintain recentering capability without leaving residual deformation upon considered earthquakes, even when the temperature is down to $-40^{\circ}C$.

• 한국통신학회논문지
• /
• 제36권5B호
• /
• pp.429-436
• /
• 2011

G-PON은 FTTH를 효율적으로 구현하는 한 방편이며 이더넷, IP 패킷, TDM 신호 등을 수용할 수 있는 GEM 프레임을 가지고 있다. 그 중에서도 이더넷은 캠퍼스 가입자 액세스, 캐리어 서비스에 있어서 가장 널리 사용되는 제 2 계층 프로토콜이므로 G-PON 시스템은 이더넷 인터페이스를 우선적으로 제공해 주어야 한다. 본 논문은 G-PON TC 칩에서 이더넷 프로토콜을 수용하기 위해 ITU-T G984.3에서 제시한 Ethernet over GEM 규격을 바탕으로 기가급의 이더넷 정합기를 구현한다. 정합기는 각각의 이더넷 프레임을 하나 또는 여러 개의 GEM 프레임에 매핑하고 GEM 헤더 생성, 프레임의 캡슐화, 분할 및 재조립 기능을 가진다. 특히, 구현된 정합기는 규격에는 없지만 중요한 기능인 MAC 주소를 논리적 연결을 확인하는데 역할을 하는 port-ID로 바꾸어 주는 변환기를 내장하고 있다. 이 정합기는 FPGA로 구현되며 논리분석기와 이더넷 분석기를 이용하여 프레임 분할과 조립, 주소 학습 기능과 처리율 등을 확인한다.

• 정보처리학회논문지B
• /
• 제11B권6호
• /
• pp.701-708
• /
• 2004

기존의 내용기반 비디오 검색 시스템들은 주석기반 검색 또는 특징기반 검색과 같은 단일 방식으로만 검색을 하므로 검색 효율이 낮을 뿐 아니라 완전한 자동 처리가 되지 않아 시스템 관리자나 주석자의 많은 노력을 요구한다. 본 논문에서는 주석기반 검색과 특징기반 검색을 이용하여 대용량의 비디오 데이터에 대한 사용자의 다양한 의미검색을 지원하는 에이전트 기반에서의 자동화되고 통합된 비디오 의미기반 검색 시스템을 제안한다. 사용자의 기본적인 질의를 분석하고 질의에 의해 추출된 키 프레임의 이미지를 사용자가 선택함으로써 인덱싱 에이전트는 추출된 키 프레임의 주석에 대한 의미를 더욱 구체화시킨다. 또한, 사용자에 의해 선택된 키 프레임은 특징기반 검색의 질의 이미지가 되고 인덱싱 에이전트는 제안하는 다중 분할 칼라 히스토그램 기법을 통해 질의 이미지와 데이터베이스의 키 프레임들을 비교한 후 가장 유사한 키 프레임 이미지를 검색하여 사용자에게 디스플레이 한다. 제안하여 구현된 시스템은 현저히 향상된 성능을 보였다.

• Journal of Korean Neurosurgical Society
• /
• 제37권6호
• /
• pp.422-426
• /
• 2005

Objective: Different types of interbody fusion cages are available for use in the surgical treatment of degenerative cervical diseases. The purpose of this study is to assess the technical feasibility, clinical efficacy and radiological results of intervertebral fusion with a carbon composite Osta-Pek frame cage (Co-Ligne AG, Switzerland) following anterior cervical discectomy. Methods: 41 patients (25males and 16females) with minimum 6months follow-up were included in the study. Disc height, cervical lordotic angle, segmental angle, and fusion rate were assessed by lateral radiographs. In this retrospective analysis, clinical outcome was assessed as evaluated according to Odom's criteria. Results: Fifty-four cages were implanted in 30 single-level, 9 two-level, and 2 three-level procedures. The mean disc height, cervical lordosis angle, segmental angle were $4.2{\pm}1.8mm,\;23.5{\pm}7.2^{\circ},\;2.3{\pm}3.3^{\circ}$ pre-operatively and $5.3{\pm}2.1mm,\;24.2{\pm}8.3^{\circ},\;3.8{\pm}3.5^{\circ}$ at 6months after the surgery. Six months after surgery, there was radiographic evidence of fusion in 92.7% (38/41) of the patients. According to Odom's criteria, 37 of 41 (90.2%) patients experienced good to excellent functional recovery. Conclusion: These clinical and radiological results suggest that the carbon composite Osta-Pek frame cages are safe and effective alternative to autologous bone graft after anterior cervical discectomy for treatment of degenerative cervical disease.