• 태양에너지
• /
• 제19권1호
• /
• pp.77-86
• /
• 1999

The optimal thermal design of a single heat source on one wall of a vertical open top cavity was studied experimentally. The temperature and flow fields in the cavity were visualized. The objectives of this study is to obtain the best location of the single heat source and to examine the effects of heat source protrusion, substrate thermal conductivity and cavity aspect ratio on the natural convection cooling due to a single heat source. As the results, the cooling effect for the copper substrate is superior to that of the epoxy-resin substrate and is improved with increasing cavity width. For the epoxy-resin substrate of lower conductivity, the protrusion of the heaters plays a role in decreasing the cooling effect. The best location was the mid-height of the substrate.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.509-515
• /
• 2020

A practical single photon source for fiber-based quantum information processing is still lacking. As a possible 1.55-㎛ quantum-dot single photon source, an InGaAsP/InP-air-aperture micropillar cavity is investigated in terms of fabrication tolerance. By properly modeling the processing uncertainty in layer thickness, layer diameter, surface roughness and the cavity shape distortion, the fabrication imperfection effects on the cavity quality are simulated using a finite-difference time-domain method. It turns out that, the cavity quality is not significantly changing with the processing precision, indicating the robustness against the imperfection of the fabrication processing. Under thickness error of ±2 nm, diameter uncertainty of ±2%, surface roughness of ±2.5 nm, and sidewall inclination of 0.5°, which are all readily available in current material and device fabrication techniques, the cavity quality remains good enough to form highly efficient and coherent 1.55-㎛ single photon sources. It is thus implied that a quantum dot contained InGaAsP/InP-air-aperture micropillar cavity is prospectively a practical candidate for single photon sources applied in a fiber-based quantum information network.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2625-2630
• /
• 2008

Horseshoe vortices are formed at the junction of an object immersed in fluid-flow and endwall plate as a result of three-dimensional boundary layer separation. This study shows preliminary results of the kinematics of such horseshoe vortices around a circular cylinder with a cavity (slot) placed upstream to disturb the primary separation line. Through the cavity, no mass flow addition (blowing) or reduction (suction) is applied. The upstream cavity weakens the adverse pressure gradient before the cavity. With the upstream cavity, a single vortex is found to form immediately upstream of the cylinder whereas a typical two vortex system is observed in the absence of the cavity. Furthermore, the strength of the single vortex tends to be reduced, resulting from the interaction with the separated flow convecting directly towards the leading edge of the cylinder.

• 소음진동
• /
• 제9권6호
• /
• pp.1123-1130
• /
• 1999

A system which is composed of a membrane and an air cavity is studied. To analyze the low frequency characteristics of a single membrane-cavity system, a plane wave model is derived. The relations among system variables, such as tension, density and stiffness, are investigated. Absorption coefficient has a maximum value at a peak frequency. In addition, a membrane-cavity system absorbs the low frequency noise with a band around peak frequency. This band is primarily determined by damping effect of the system. Furthermore, a multiple membrane-cavity system is investigated by using the transfer matrix method. To show the practical applicability of the proposed model, extensive experiments were conducted. Results show that a multiple membrane-cavity system can have broader noise reduction in the low frequency range than single.

• 한국광학회지
• /
• 제20권6호
• /
• pp.339-345
• /
• 2009

결정을 이용하여 고출력 단일모드 특성을 가지는 수직공진 표면발광 레이저를 제작하고 발진 특성을 관찰하였다. 일반적으로 광 밴드갭 형성을 위해 수십개의 광 결정 홀을 식각하나, 이번 연구에서는 6개의 홀만으로 단일모드를 구현하였고, 폴리이미드로 홀을 메우게 되어 신뢰성이 유리한 장점이 있다. 산화 구경과 광 결정 홀의 크기를 변화시키며 실험을 진행하여 단일모드 특성의 변화를 분석하였다. 다양한 광 결정 구조를 가진 수직공진 표면발광 레이저에서 고출력 단일모드 발진이 가능함을 확인하였다.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.74-78
• /
• 2012

A multi-cavity injection mold system of protein chip for point-of-care with cavity temperature and pressure sensors was proposed in this work. In advance of manufacturing for the multi-cavity injection mold system, a single cavity injection mold system to mold protein chip was considered. Injection molding analysis for the presented system was performed to optimize the process of the molding and suggest guides to design. On the basis of the results for the single cavity system, a multi-cavity injection mold system for protein chip was analyzed, designed and manufactured with cavity temperature and pressure sensors. Results of balanced filling for protein chip models were obtained from the presented mold system.

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.306-313
• /
• 2014

A Fabry-Perot resonator cavity antenna for Ku-band application is presented in this paper. The Fabry-Perot cavity is formed by a ground plane and a frequency selective surface (FSS) made of a circular hole array. The cavity resonance is excited by a single-feed microstrip patch located inside the cavity. The measured results show that the proposed antenna has an impedance bandwidth of approximately 13% ($VSWR{\leq}2$) and a 3-dB gain bandwidth of approximately 7%. The antenna produces a maximum gain of 18.5 dBi and good radiation patterns over the entire 3-dB gain bandwidth. The antenna's very thin profile, high directivity, and single excitation feed make it promising for use in wireless and satellite communication applications in a Ku-band frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.609-613
• /
• 1986

The resonance frequency and the gain for oscillation of external cavity diode lasers are derived by approximating the phase and the gain conditions. By modifying single mode rate equations for the external cavity diode laser, steady state solutions and their stability are studied.

• Journal of electromagnetic engineering and science
• /
• 제5권3호
• /
• pp.105-111
• /
• 2005

This paper presents the basic characteristics of a cutoff cavity-backed aperture antenna with a feed post and a parasitic post inserted parallel to the aperture. It is shown that this type of antenna forcibly resonates the cutoff cavity by adding a single external reactance to the parasitic post. The Galerkin's method of moments is used to analyze integral equations for the unknown electric current on each post and the aperture electric field on the aperture. The value of an external reactance for forced resonance is analytically obtained by deriving a determining equation. Also the current distribution on each post, aperture electric field distributions, and the radiation patterns are discussed. The theoretical analysis is verified by the measured return loss and radiation patterns.

• 한국전자파학회논문지
• /
• 제15권12호
• /
• pp.1141-1146
• /
• 2004

본 논문에서는 무궁화 3호 위성의 방송수신용 안테나를 설계 및 제작하였는데, 기존의 방송수신용 안테나보다 넓은 수신영역을 가지는 고이득 안테나를 제작하는데 중점을 두었다. 본 안테나는 급전 라인의 손실을 줄이기 위하여 급전 라인을 도파관 구조로 설계하였다. 또한 방사효율을 높이고 급전 구조를 간단히 하기 위하여 cavity backed slot array 형태의 방사구조를 제안하였다. 슬롯 배열 안테나의 최대 이득은 11.7 GHz$\~$12.75 GHz 대역에서 33 dEi 이상을 얻을 수 있었다. 임피던스 대역폭 또한 VSWR 2:1에서 $13\%$로 설계사양을 만족시켰다.