• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
• /
• pp.132-135
• /
• 2005

A design for the input filter and the output filter of a single-phase uninterruptible power supply (UPS) system is proposed. A filter design example is presented. And also, this dissertation describes a reduction of the DC voltage ripple of a single-phase UPS. The input power of proposed UPS fluctuates with twice frequency of the utility source, which causes DC voltage fluctuation. The reduction of the DC voltage fluctuation requires a large DC link capacitor. The proposed method uses a LC series resonant filter paralleled with a conventional smoothing capacitor. The effectiveness of the proposed method was confirmed by simulation results.

• 전자공학회논문지C
• /
• 제34C권6호
• /
• pp.28-36
• /
• 1997

In this work, a highly linear video-speed CMOS current-mode digital-to-analog converter (DAC) is proposed. A newswitching scheme for the current cell matrix of the DAC simultaneously reduces graded and symmetrical errors to improve integral nonlinearities (INL). The proposed DAC is designed to operate at any supply voltage between 3V and 5V, and minimizes the glitch energy of analog outputs with degliching circuits developed in this work. The prototype dAC was implemented in a LG 0.8um n-well single-poly double-metal CMOS technology. Experimental results show that the differential and integral nonlinearities are less than .+-. LSB and .+-.0.8LSB respectively. The DAC dissipates 75mW at a 3V single power supply and occupies a chip area of 2.4 mm * 2.9mm.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권3호
• /
• pp.101-105
• /
• 2004

The efficient power MOSFET inverter applied for a simple and low cost power supply is proposed for driving the dielectric barrier discharge (DBD) lamp load. For decades, the DBD phenomenon has been used for ozone gas production in industry. In this research, the ultraviolet and visible light sources utilizing the DBD lamp is considered as the load for solid-state high frequency power supply. It is found that the simple voltage-source single-ended quasi-resonant ZVS inverter with only one active power switch could effectively drive this load with the output power up to 700 W. The pulse density modulation based control scheme for the single-ended quasi-resonant ZVS inverter using a low voltage and high current power MOSFET switching device is proposed to provide a linear power regulation characteristic in the wide range 0-100％ of the full power as compared with the conventional control based Royer type parallel resonant inverter type power supplies.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1283-1288
• /
• 2012

This paper presents speed control characteristics of capacitor-run SPIM(Single Phase Induction Motor) using TRIAC for comparing and analyzing four kinds of voltage control methods such as supply voltage control, main winding voltage control, auxiliary winding voltage control and auxiliary winding voltage control without starting capacitor. The computer simulations were performed using MATLAB Simulink to show control characteristics of four voltage control methods. And their control characteristics were conformed by experiments for capacitor-run 90W SPIM as a sample motor. The results of simulations and experiments show that supply voltage control method has fast dynamic response characteristics and main winding voltage control method has higher power efficiency and can be implemented at lower system cost.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.157-162
• /
• 2006

본 논문에서는 오존발생시스템의 전원으로 사용하는 단상 풀브리지 인버터를 ATmega128을 이용하여 위상 변위제어 방식에 의해 출력 주파수와 전압을 제어하였다. 또한, 사용자가 오존발생 시스템에서 키패드를 사용하여 출력 주파수와 전압값을 설정할 수 있게 하였고, 사용자가 설정한 값을 LCD를 이용하여 디스플레이 하였다. 실제로 전원 시스템을 설계하여 제작하였으며, 오존발생시스템에서의 실험을 통해서 출력 전압과 주파수 제어의 성능을 검증하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.165-175
• /
• 2010

This paper presents a fine-grain supply-voltage-control scheme for low-power FPGAs. The proposed supply-voltage-control scheme detects the critical path in real time with small overheads by exploiting features of asynchronous architectures. In an FPGA based on the proposed supply-voltage-control scheme, logic blocks on the sub-critical path are autonomously switched to a lower supply voltage to reduce the power consumption without system performance degradation. Moreover, in order to reduce the overheads of level shifters used at the power domain interface, a look-up-table without level shifters is employed. Because of the small overheads of the proposed supply-voltage-control scheme and the power domain interface, the granularity size of the power domain in the proposed FPGA is as fine as a single four-input logic block. The proposed FPGA is fabricated using the e-Shuttle 65 nm CMOS process. Correct operation of the proposed FPGA on the test chip is confirmed.

• Industrial Engineering and Management Systems
• /
• 제16권1호
• /
• pp.22-43
• /
• 2017

It is urgently-needed to construct a green supply chain (GSC) from collection of used products through recycling of them to sales of products using the recycled parts. Besides, it is necessary to consider the uncertainty in product demand as a risk in a GSC. This study proposes the optimal operations for a GSC with a retailer and a manufacturer. A retailer pays an incentive for collection of used products from customers and sells a single type of products in a market. A manufacturer produces the products ordered by the retailer, using recyclable parts with acceptable quality and compensates the collection cost of used products as to the recycled parts. This paper discusses the following risk attitudes: risk-neutral attitude, risk-averse attitude, and risk-prone attitude. Using mean-variance analysis, the optimal decisions for product order quantity, collection incentive, and lower limit of quality level, in the decentralized GSC (DGSC) and the integrated GSC (IGSC) are made. DGSC optimizes the utility function of each member. IGSC does that of the whole system. The analysis numerically investigates how (i) risk attitude and (ii) quality of recyclable parts affect the optimal operations. Supply chain coordination between GSC members to shift IGSC from DGSC is discussed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.797-801
• /
• 1998

This paper presents a balanced 3/1 supply scheme for electric railway. By employing an active filter, the current of the three-phrase delivery system is balanced while the load is single phrase, which makes it possible for the traction system to behave like a pure-resistance load, with unity power factor and no harmonics. Simulation results are present to verify the scheme's topology and control strategies.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.621-630
• /
• 2016

In this paper, a single current sensor technique (SCST) is proposed for single-phase full-bridge inverters. The proposed SCST measures the currents of multiple branches at the same time, and reconstructs the average inductor, capacitor, and load current in a single switching cycle. Since all of the branches' current in the LC filter and the load are obtained using the SCST, both the inductor and the capacitor current feedback schemes can be selectively applied while taking advantages of each other. This paper also analyzes both of the current feedback schemes from the view point of the closed-loop output impedance. The proposed SCST and the analysis in this paper are verified through experiments on a 3kVA single-phase uninterruptible power supply (UPS).

• 한국연소학회지
• /
• 제19권4호
• /
• pp.8-13
• /
• 2014

Flow distribution of fuel nozzles for a combustor in a micro gas turbine is numerically investigated. The fuel supply system for the present study has 12 single nozzles with a diameter of several hundred micrometers. A uniform temperature distribution of a combustor outlet should be achieved for maximizing the lives of the turbine blades and nozzle guide vanes. For this, it is very important to uniformly supply fuel to a combustor. In order to investigate flow distributions of fuel nozzles, numerical models for fuel nozzles are made and solved by a commercial code, ANSYS FLUENT. An effect of a fuel nozzle diameter and fuel flow rates on flow distribution of fuel nozzles is numerically investigated. As a result, non-uniformity is increasing as a diameter of a single fuel nozzle increases. Finally, an appropriate diameter of a single fuel nozzle is suggested.