• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.22-27
• /
• 2011

Changes in total nitrogen (T.N.) and total phosphate (T.P.) content in environmental waste water upon the reaction of biological purifying reagents were measured and the reaction rate was evaluated. The purification capacity of two biological purifying reagents composed of vegetable Lactobacillus fermentum (V.L.F.), Saccharomyces cerevisiae(S.C), and Bacillus subtilis(B.S.) were evaluated and compared with that of commercial water purification system operating by local government. After 18days of reaction, the mixture of V.L.F. and S.C. showed dramatic decrease of T.N.(36.21% of the initial value). The mixture of V.L.F., S.C., and B.S. showed faster reaction rate to decrease T.P. compared with that of the mixture of V.L.F. and S.C. The reaction constant of mixture of V.L.F. and S.C. was estimated to be 0.178 $day^{-1}$ by the curve fitting of the data of changes in T.N. during the reaction.

• Geomechanics and Engineering
• /
• v.17 no.4
• /
• pp.343-354
• /
• 2019

The present study demonstrates the application of seismic petrophysics and amplitude versus angle (AVA) forward modeling to identify the reservoir fluids, discriminate their saturation levels and natural gas composition. Two case studies of the Lumshiwal Formation (mainly sandstone) of the Lower Cretaceous age have been studied from the Kohat Sub-basin and the Middle Indus Basin of Pakistan. The conventional angle-dependent reflection amplitudes such as P converted P ($R_{PP}$) and S ($R_{PS}$), S converted S ($R_{SS}$) and P ($R_{SP}$) and newly developed AVA attributes (${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$) are analyzed at different gas saturation levels in the reservoir rock. These attributes are generated by taking the differences between the water wet reflection coefficient and the reflection coefficient at unknown gas saturation. Intercept (A) and gradient (B) attributes are also computed and cross-plotted at different gas compositions and gas/water scenarios to define the AVO class of reservoir sands. The numerical simulation reveals that ${\Delta}R_{PP}$, ${\Delta}R_{PS}$, ${\Delta}R_{SS}$ and ${\Delta}R_{SP}$ are good indicators and able to distinguish low and high gas saturation with a high level of confidence as compared to conventional reflection amplitudes such as P-P, P-S, S-S and S-P. In A-B cross-plots, the gas lines move towards the fluid (wet) lines as the proportion of heavier gases increase in the Lumshiwal Sands. Because of the upper contacts with different sedimentary rocks (Shale/Limestone) in both wells, the same reservoir sand exhibits different response similar to AVO classes like class I and class IV. This study will help to analyze gas sands by using amplitude based attributes as direct gas indicators in further gas drilling wells in clastic successions.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.12
• /
• pp.301-312
• /
• 2018

In industrial wireless sensor networks, the continuous object detection such as fire or toxic gas detection is one of major applications. A continuous object occurs at a specific point and then diffuses over a wide area. Therefore, many studies have focused on accurately detecting a continuous object and delivering data to a static sink with an energy-efficient way. Recently, some applications such as fire suppression require mobile sinks to provide real-time response. However, the sink mobility support in continuous object detection brings challenging issues. The existing approaches supporting sink mobility are designed for individual object detection, so they establish one-to-one communication between a source and a mobile sink for location update. But these approaches are not appropriate for a continuous object detection since a mobile sink should establish one-to-many communication with all sources. The one-to-many communication increases energy consumption and thus shortens the network lifetime. In this paper, we propose the origin-centric communication scheme to support sink mobility in a continuous object detection. Simulation results verify that the proposed scheme surpasses all the other work in terms of energy consumption.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.541-549
• /
• 2018

This paper deals with the braking dynamic behavior of diesel electric locomotive pulling domestic cargo and passenger vehicles. Friction coefficient, pneumatic pressure, and running resistance affecting the braking system were tested. For the friction coefficient, the Dynamo test was performed with reference to UIC 541-4. The results are analyzed by multivariate regression and the relationship between braking force and ititial velocity is presented. The pneumatic pressure were classified into service braking and emergency braking. In order to reflect the characteristics of the brake valve and piping, the pressure rising over time was measured in the vehicle. In order to reflect the external force acting on the vehicle, we carried out the test of EN 14067-4 and presented the second order polynomial formula on a running resistance. The running resistance test results were compared with other countries. The dynamic behavior of a diesel electric locomotive running on a straight flat track based on vehicle resources, friction coefficient, braking pressure, and running resistance is simulated using the time integration presented in EN 14531-1. The simulation results were compared and verified with the vehicle braking test results. The results of this study can be used to analyze the dynamic braking behavior of a train. Also, it is expected that various parameters affecting braking in vehicle design can be analyzed and used as basic data for braking performance improvement.

• Journal of Korea Water Resources Association
• /
• v.52 no.7
• /
• pp.463-473
• /
• 2019

This study compared the characteristics of the optimization technique and the water supply and demand forecast using K-WEAP (Korea-Water Evaluation and Planning System) model and MODSIM (Modified SIMYLD) model considering wtaer supply priority. Currently, The national water resources plan applied same priority for municipal, industrial and agricultural demand. the K-WEAP model performs the ratio allocation to satisfy the maximum satisfaction rate, whereas the MODSIM model should be applied to the water supply priority of demands. As a result of applying the priority, water shortage decreased by an average of $1,035,000m^3$ than same prioritized results. It is due to the increase of the return flow rate as the distribution of Municipal and industrial water increases. Comparing the analysis results of K-WEAP and MODSIM applying the priorities, the relative error was within 5.3% and the coefficient of determination ($R^2$) was 0.9999. In addition, if both models provide reasonable water balance analysis results, K-WEAP is superior to GUI convenience for model construction and data processing. However, MODSIM is more effective in simulation time efficiency. It is expected that it will be able to carry out analysis according to various scenarios using the model.

• Journal of Digital Convergence
• /
• v.17 no.7
• /
• pp.215-224
• /
• 2019

The objective of study was to identify perceived medication administration Competence of senior nursing students. A total of 128 students were recruited. The instruments for this study were self-efficacy for drug dosage calculation, anxiety for drug dosage calculation and perceived medication administration competence. The data were collected from November 2018 to January 2019, analyzed by descriptive analysis, chi-square, t-test, Scheffe test, correlation coefficients, and multiple regression using the SPSS 25.0 program. The main predictors of perceived medication administration competence were identified as confidence in drug dosage calculation (${\beta}=.463$, p<.001), Attitude of participation at clinical practice (${\beta}=.168$, p=.040). These two factors explained about 29% of variance in perceived medication administration competence (F=26.93, p<.001). It can contribute to improve their ability to administrate medication in practice, with the accuracy of prescription, recalculation of prescribed drug dose, and observation of adverse reactions in clinical practice and simulation with collaborative approach.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.1
• /
• pp.45-50
• /
• 2019

With the gradual advancement of IT, passive work processes are automated and the overall quality of life has greatly improved. This is made possible by the formation of an organic topology between a wide variety of real-life smart devices. To serve these diverse smart devices, businesses or users are using the cloud. The services in the cloud are divided into Infrastructure as a Service (IaaS), Platform as a Service (PaaS) and Software as a Service (SaaS). SaaS runs on PaaS, and PaaS runs on IaaS. Since IaaS is the basis of all services, an algorithm is required to operate virtualization resources efficiently. Among them, desktop resource virtualization is used for resource high availability of unused state time of existing desktop PC. Clustering of hierarchical structures is important for high availability of these resources. In addition, it is very important to select a suitable algorithm because many clustering algorithms are mainly used depending on the distribution ratio and environment of the desktop PC. If various attempts are made to find an algorithm suitable for desktop resource virtualization in an operating environment, a great deal of power, time, and manpower will be incurred. Therefore, this paper proposes a resource clustering simulator for cluster selection of desktop virtualization. This provides a clustering simulation to properly select clustering algorithms and apply elements in different environments of desktop PCs.

• Journal of Climate Change Research
• /
• v.6 no.3
• /
• pp.233-241
• /
• 2015

In 2014, the United Nations Framework Convention on Climate Change (UNFCCC) agreed to submit the Intended Nationality Determined Contributions (INDCs) at the conference of parties held in Lima, Peru. Then, the South Korean government submitted the INDCs including GHGs reduction target and reduction potential on July, 2015. The goal of this study is to predict GHGs emission and to analyze reduction potential in agricultural sector of Korea. Activity data to estimate GHGs emission was forecast by Korea Agricultural Simulation Model (KASMO) of Korea Rural Economic Institute and estimate methodology was taken by the IPCC and guideline for MRV (Measurement, Reporting and Verification) of national greenhouse gases statistics of Korea. The predicted GHGs emission of agricultural sectors from 2021 to 2030 tended to decrease due to decline in crop production and its gap was less after 2025. Increasing livestock numbers such as sheep, horses, swine, and ducks did not show signigicant impact the total GHGs emission. On a analysis of the reduction potential, GHGs emission was expected to reduce $253Gg\;CO_{2-eq}$. by 2030 with increase of mid-season water drainage area up to 95% of total rice cultivation area. The GHGs reduction potential with intermittent drainage technology applied to 10% of the tatal paddy field area, mid-drainage and no organic matter would be $92Gg\;CO_{2-eq}$. by 2030.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.25-39
• /
• 2018

The purpose of this study is to develop an efficient incident detection algorithm by applying machine learning, which is being widely used in the transport sector. As a first step, network of the target site was constructed with micro-simulation model. Secondly, data has been collected under various incident scenarios produced with combination of variables that are expected to affect the incident situation. And, detection results from both McMaster algorithm, a well known incident detection algorithm, and the Naive Bayes algorithm, developed in this study, were compared. As a result of comparison, Naive Bayes algorithm showed less negative effect and better detect rate (DR) than the McMaster algorithm. However, as DR increases, so did false alarm rate (FAR). Also, while McMaster algorithm detected in four cycles, Naive Bayes algorithm determine the situation with just one cycle, which increases DR but also seems to have increased FAR. Consequently it has been identified that the Naive Bayes algorithm has a great potential in traffic incident detection.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.2
• /
• pp.28-36
• /
• 2019

The APR1400 (Advanced Power Reactor 1400MW) nuclear power plant is a large-scale national infrastructure facility with a total project cost of 8.6 trillion won and a project period of 10 years or more. The total project area is about 2.17 million square meters and consists of more than 20 buildings and structures. And the total number of drawings required for construction is about 65,000. In order to design such a large facility, it is important to establish a design standard that reflects the design intent and can increase conformity between documents (drawings). To this end, a design bases document (DBD) reflecting the design bases that extracted in regulatory requirements (e.g. 10CFR50, Korean Law, etc.) is created. However, although the design bases are important concepts that are a big framework for the whole design of the nuclear power plant, they are managed in 2-dimensional by the experts in each field fragmentarily. Therefore, in order to improve the usability of building information, we developed BIM(Building Information Model) based 3-dimensional design bases management system. For this purpose, the concept of design bases information layer (DBIL) was introduced. Through the simulation of developed system, design bases attribute and element data extraction for each DBIL was confirmed, and walls, floors, doors, and penetrations with DBIL were successfully extracted.